Philips PUS8359 (IPS) vs Hisense E7Q PRO / E79Q PRO

The quality of the HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly evident on the five tested test cards. Additionally, the television does not impress in terms of colour gamut coverage – just 76% DCI-P3 is a result that can be considered poor, especially compared to other models in a similar price range.

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

The most faithful factory mode in terms of compliance with the source material turned out to be "Film," which was used in our tests. However, like other factory modes, it also had its drawbacks. Both in SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish hue. This effect was particularly evident in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that each colour was shifted towards warmer tones, which affected the accuracy of colour reproduction. A key aspect of the image is also contrast and brightness, which can be assessed by analysing the gamma charts and the EOTF curve. In the gamma chart, we observed significant deviations – both excessively high values that caused loss of detail in the shadows and excessively low values, which led to a drastic drop in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

Philips, in both its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as straightforward as it might seem. We managed to adjust the white balance, improve the gamma, and fine-tune the EOTF curve; however, despite these efforts, the deltaE errors remained at a very high level. The main causes were limited coverage of the DCI-P3 palette and low maximum brightness, which significantly affected the final outcome. While the overall presentation is much improved, the design features of the television did not allow us to achieve spectacular results.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

In this paragraph, we'll take a look at two functionalities. We'll once again examine the function responsible for tonal transitions, but we'll also check how the television handles image scaling. The option responsible for smooth gradation is called "Distortion Reduction". As we've established, it does a pretty good job of smoothing out inconsistencies. However, we must point out two things: we are unable to enable it for HDR content, and it blurs details in films.

The television being tested cannot boast the best image scaling. There is a noticeable overall blurriness in the image, but worse still, it blurs details. This is particularly evident on the branches and the model's hair. A characteristic white halo around the figures is also visible.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion smoothing features means that the picture in dynamic scenes isn't sharp enough. Despite using an IPS panel (43 and 55'), which theoretically should provide better clarity than VA panel variants, there’s no noticeable improvement in terms of motion blur. In photos of fast movement, it’s clear that the figure of the little green man is distinctly blurry, indicating that the TV struggles to maintain sharpness in dynamic shots.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

In terms of console compatibility, Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Automatic Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low-latency mode, making quicker reactions during gaming easier, while VRR smoothly adjusts the refresh rate, eliminating screen tearing issues. The Game Bar provides quick access to game settings and ongoing parameter monitoring; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel disappointed. Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV’s ability to deliver smooth and detailed experiences during fast-paced, dynamic gameplay.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.