Philips OLED910 vs SONY BRAVIA 3 II (XR35M2)

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The Bravia 3 II isn't exactly a TV that tries to impress with brightness. In our measurements it reached around 450 nits, so it's well short of the brightest models on the market. That doesn't mean HDR is just a paper feature here. Compared with standard SDR material, the brightest parts of the image can already punch through noticeably, and highlights, light sources and stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where the screen contains lots of bright elements. Then the Bravia 3 II can give a taste of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of bold, spectacular HDR we’re left with a merely competent picture.

Colours

The Bravia 3 II uses a QLED panel, although technically it doesn't employ a traditional quantum-dot layer. Instead Sony has used a PFS phosphor-based solution, which performs a very similar role: it allows for more saturated reds and greens, and thus reproduces a much wider colour gamut. In our measurements coverage of the DCI-P3 gamut was about 94%, and of the very wide BT.2020 around 74.4%. Those are good results for this class of hardware, which means the Bravia 3 II has no problem showing suitably saturated colours in HDR material. Colours don't look washed out, and the more intense hues can look really attractive.

Update 01/2026

After conducting a series of calibrations of the OLED910 model with our clients, we noticed that the measurement results differ from those obtained during the initial tests. The factory tuning of the film mode proves to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory colour reproduction holds close to reference standards – average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the television manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from the shadows. In practice, this means that the image can appear too bright, resulting in a loss of black depth in favour of visible details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to colour reproduction straight out of the box, in Filmmaker mode the OLED910 performs really poorly. The television excessively highlights the blue colour, and at times it looks almost like a store mode. This gives the impression that the manufacturer hasn’t quite tuned the device well. The result is that colours appear unnatural, and the overall effect resembles a somewhat exaggerated display setup in a market. HDR content presents much better, where apart from a slight loss of details in the blacks, there’s not much to complain about. The problem is that in everyday viewing, it’s actually SDR material that matters most – and on the OLED910 it simply looks poor and falls far short of what we would expect from a television of this class.

In Professional mode the Bravia 3 II delivers a fairly good level of colour reproduction straight out of the box. In SDR the most noticeable issue is a slightly low gamma, which makes the midtones a little brighter. The white balance isn't perfect either; as brightness increases a bit of blue and red drops away, so whites can sometimes appear a touch warmer with a faint greenish tint. These aren't mistakes that immediately jump out when watching a film. Average error values hover around 3, so the factory setup can be considered quite good. The situation in HDR is similar. Here too there's a slight lack of blue, so the picture is marginally warmer than the reference, but the difference isn't large enough to be distracting during normal viewing.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

After calibration you can get a lot out of SDR material. The white balance was set almost perfectly, gamma practically matches the reference value, and average colour errors fell from around 3 to about 1. That’s already the level at which differences from the reference image are very hard to spot in practice. The Bravia 3 II therefore shows that despite its place in Sony’s range it has quite a bit of potential for precise picture tuning. Improvement is also visible in HDR, although here you can’t avoid all the limitations of the TV itself. Once the colours are evened out it’s easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II gently darkens parts of the image. That isn’t ideal from a reference point of view, but in this particular TV it also has an advantage. With no local dimming and average black levels this behaviour slightly reduces the visibility of the backlight in darker scenes and helps preserve a stronger sense of contrast. You could say Sony is partly masking the limitations of the panel this way, rather than trying at all costs to stick to the reference brightness.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

Bravia 3 II is Sony's first TV to use the new MediaTek Pentonic 800 chip, and you can see a few changes in the image processing. Starting with the basics: the upscaling itself is decent. The TV can sensibly upscale lower-resolution material and doesn't have a strong tendency to over‑emphasise jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming material the picture therefore remains quite attractive.

We have more reservations about the digital image processing. In this model Sony has replaced the well-known "Smooth Gradation" function with a new setting called "Digital Noise Reduction". Its job is basically the same: to smooth out ugly tonal transitions and artifacts caused by heavy compression. Unfortunately, this function performs noticeably worse than before. At the "Large" setting (the only one that had any visible effect) the TV can smooth away too many image elements at once, which causes film grain to disappear and object textures or even skin to start looking unnatural. Worse still, the effect is not particularly stable. When there's more motion in a scene, the function's effect noticeably weakens and at times it looks as if the TV stops intervening in the image altogether. So for everyday viewing we wouldn't recommend using it at a high level. It can help on static shots, but the trade-off is often too much loss of detail.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Sony has, however, managed that issue very well here. Fast-moving objects remain sharp, and the characteristic motion trails and blur are reduced to a very low level, if not to zero. It's one of the least motion-blur-prone LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series, the Bravia 9 II.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.

The Sony Bravia 3 II is a very good TV for gamers, although not everything has been solved the way we’d like. The biggest change concerns the connectors. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the problems that has hung over this manufacturer’s TVs for years. You can connect several devices at once and on each input use the device’s full capabilities, including VRR and ALLM. There’s also a simple Game Bar that lets you check the key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. That won’t be an issue for everyone, but people using that resolution on a console or PC—for example to get higher frame rates in certain games—will have to choose 1080p. We have more reservations about HGiG support. Sony doesn’t let you disable tone mapping on the Bravia 3 II, so the TV keeps processing HDR even when you’d prefer to leave that task to the console. It’s easiest to spot during HDR setup—the checkerboard test pattern doesn’t disappear at the point where it should based on the TV’s actual capabilities. That doesn’t mean HDR in games will look bad. You just need to set up a little differently and, rather than relying on the pattern, manually set the peak brightness to about 450 nits. So the issue can be worked around, but you should know about it before you start configuring your console.