Philips OLED910 vs LG OLED G6 (G64LW, G66LS)

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits and, best of all, this translates directly to real movie scenes. The TV flawlessly extracts details in the bright areas of the image. And this is regardless of whether we are talking about very small points in the form of stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 drops due to the panel protection system (ABL). However, in real, varied movie shots, this value still hovers around an impressive 2000 nits, which can be considered a remarkable result. The coverage of the color palette also deserves praise. The new 2nd generation Tandem OLED panel has brought about only a cosmetic change, but still an improvement. The coverage of the DCI-P3 color space reaches nearly 99.5%, while the ultra-wide BT.2020 is around 84%. These are very good results, although it's important to remember one thing: at extremely high brightness levels, the volume of colors will be lower than in QD-OLED panels from Samsung Display due to the use of white sub-pixels (WOLED). However, in everyday content and most films, capturing this difference will be very difficult.

Update 01/2026

After conducting a series of calibrations of the OLED910 model with our clients, we noticed that the measurement results differ from those obtained during the initial tests. The factory tuning of the film mode proves to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory colour reproduction holds close to reference standards – average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the television manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from the shadows. In practice, this means that the image can appear too bright, resulting in a loss of black depth in favour of visible details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to colour reproduction straight out of the box, in Filmmaker mode the OLED910 performs really poorly. The television excessively highlights the blue colour, and at times it looks almost like a store mode. This gives the impression that the manufacturer hasn’t quite tuned the device well. The result is that colours appear unnatural, and the overall effect resembles a somewhat exaggerated display setup in a market. HDR content presents much better, where apart from a slight loss of details in the blacks, there’s not much to complain about. The problem is that in everyday viewing, it’s actually SDR material that matters most – and on the OLED910 it simply looks poor and falls far short of what we would expect from a television of this class.

We tested the LG G6 in the best factory mode for colour fidelity, which is FILMMAKER MODE. In the case of our test unit, this mode was reasonably well tuned straight out of the box. In SDR content, the only issue we noticed was the white balance, which leaned towards warmer tones. This made the image occasionally appear slightly yellowish, but overall, it wasn't a significant problem. The G6 performed a bit worse in HDR content. There, the white balance showed too much blue component. This caused the image to veer towards cooler shades, resulting in quite noticeable errors. As can be seen on our ColorChecker chart, the colours shifted towards these cooler registers. Nevertheless, considering the factory settings, the television presented a perfectly decent level. However, we know that OLED screens – particularly those from LG – respond exceptionally well to professional calibration, so we immediately proceeded to do just that.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

After completing a professional calibration, we gained complete control over the panel, and we managed to align all parameters to nearly zero. We were able to tune the white balance perfectly, which removed the factory's cool and warm tints from the screen. The effects are visibly clear in the ColorChecker test – the average colour reproduction errors dropped below the critical value of 1-2. And what does this mean? PERFECT colours, without any distortion! However, as a reviewer’s duty, we must point out how the LG G6 arbitrarily manipulates brightness, which is due to the EOTF curve's behavior. When we look at the standard synthetic graph, it might seem that the line is quite straight. However, the situation changes when we turn on the measurement filter, which shows how the television interprets brightness in actual, moving film scenes (EOTF in MOVIES). Then, it is clear as day that some of the smallest fragments on the screen are slightly overly brightened by the algorithm. Of course, for the average viewer, such a deviation will practically go unnoticed, but in the test of such an expensive screen, it’s worth noting – especially since we are talking about a model that has huge aspirations for the title of the best television of the year.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

No matter what one might say about the G6's issues with near-black signal, it must be fairly acknowledged that it handles heavily compressed material and lower resolution content extremely well. All unwanted, ugly tonal transitions are effectively reduced here by the "Smooth Gradation" feature. At the "Low" setting, the algorithm works flawlessly – effectively masking the artifacts resulting from strong compression without destroying the sharpness and details in the frame. Higher levels of this feature do further smooth the image, but they start to blur the real texture elements of the objects, so we recommend keeping this slider at a low level. As for the actual upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this respect, the G6 is on par with the global leaders.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

The LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest marks. The TV supports very high refresh rates of up to 165 Hz in 4K resolution, but most importantly – there are absolutely no signs of blurring on the screen. The response time of the matrix is virtually instant, ensuring that dynamic images remain perfectly sharp.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.

The LG G6 is a true beast for gamers and one of the best-equipped TVs on the market in this regard. The manufacturer didn't compromise and equipped this model with four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug in your PlayStation 5, Xbox Series X, or powerful PC, you'll get the absolute maximum performance out of them.

The TV supports a full suite of gaming technologies: from VRR (Variable Refresh Rate), to AMD FreeSync Premium Pro, and Nvidia G-Sync Compatible. Let's add to that a remarkably low, almost imperceptible input lag and an excellently functioning game panel (Game Optimizer), which allows you to constantly monitor signal parameters. Gaming on this screen, with the perfect black of OLED and powerful refresh rates, is pure pleasure.