Philips OLED910 vs Blaupunkt UGC5500S

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

Update 01/2026

After conducting a series of calibrations of the OLED910 model with our clients, we noticed that the measurement results differ from those obtained during the initial tests. The factory tuning of the film mode proves to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory colour reproduction holds close to reference standards – average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the television manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from the shadows. In practice, this means that the image can appear too bright, resulting in a loss of black depth in favour of visible details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to colour reproduction straight out of the box, in Filmmaker mode the OLED910 performs really poorly. The television excessively highlights the blue colour, and at times it looks almost like a store mode. This gives the impression that the manufacturer hasn’t quite tuned the device well. The result is that colours appear unnatural, and the overall effect resembles a somewhat exaggerated display setup in a market. HDR content presents much better, where apart from a slight loss of details in the blacks, there’s not much to complain about. The problem is that in everyday viewing, it’s actually SDR material that matters most – and on the OLED910 it simply looks poor and falls far short of what we would expect from a television of this class.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.