Philips OLED770 vs LG MRGB85B

The Philips OLED770 doesn't try to compete with the brightest OLEDs on the market, and it's actually hard to expect that, as it's the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows for enjoyment of HDR effects in scenes where light appears in spots – for instance, in the flash of headlights or a starry sky. In such moments, the picture can truly amaze. However, it's different when there are more bright elements on the screen. The TV, like many cheaper OLEDs, restricts luminance at that point, and the entire image noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil platform – the brightness dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasing to the eye, but it's worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 also has an ace up its sleeve – the coverage of the DCI-P3 colour palette is as high as 99%, so colours in movies and games are vibrant and very close to what the creator intended.

LG MRGB85 offers moderate brightness. On test patterns it reaches around 700 nits, which is a decent result in itself. In real movie scenes, however, values are lower and most often fall in the 400 to 600 nits range. Bright, wide shots look best. In scenes with large areas of black the TV noticeably reduces luminance, attempting to keep contrast as high as possible. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Particularly in darker parts of films, the limitations of the edge-lit backlight and imprecise local dimming become apparent again.

HDR colours

A much stronger suit of the MRGB85 is its colour. The TV covers around 95% of the DCI-P3 colour space and 74% of BT.2020, so HDR content can look vivid and impressive. Colours are well saturated, and the difference compared with basic LCD TVs is clearly noticeable. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colours is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and achieves more saturated red tones. This solution performs well for colour reproduction, but it does not change the limitations of the local dimming. The diodes are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve, even in Filmmaker mode. The white balance chart clearly indicates a lack of blue, giving the image a slightly yellowish tint. In practice, white is not snow-like, but leans towards warmer hues – which some may even find appealing, but from a precision standpoint, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is around 2.6 instead of the reference 2.4. In mid-tones, the image appears muted and more saturated, which can look too "cinematic" but detracts a bit from the naturalness. However, the most significant issues are visible in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what should be seen. In everyday viewing, this means that sometimes colours may look less natural than we would wish.

We tested the TV in Filmmaker Mode because, of the available presets, it produced the image closest to reference. The out-of-the-box colour reproduction wasn’t perfect, though. The biggest deviations were in the white balance, with too much red and not enough blue in the image, so the overall picture shifted noticeably towards warmer tones. Whites took on a slightly yellowish tint, and skin tones and bright areas didn’t always look natural. It wasn’t a fault that ruined the viewing experience, but in a direct comparison with the same panel after calibration the difference was clearly visible.

Philips OLED770 had shown signs from the start that it harboured significant potential, but it was hard to fully appreciate this in its factory settings. The image was often too warm, and some colours appeared as if they had lost their naturalness along the way. Calibration revealed that this television was very amenable to work – it responded to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance was set in both SDR and HDR so that the yellowish haze disappeared and a neutral, clear white emerged. Gamma stabilised closer to perfection, which helped restore the naturalness of mid-tones, while shadows ceased to be artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Movies are watched with greater ease; the image has cinematic depth without the feeling that something is overly darkened. However, the most interesting aspect was working on the colours. Factory errors were not dramatic, but slightly noticeable – skin tones could be too warm, and grey wasn’t always the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level that is definitely lower than the threshold of discernibility for the human eye. In other words, after correction, the colours finally “clicked” into place. Looking at the screen, we felt like the television had begun to speak with a full voice. Like an instrument that had finally been properly tuned.

Calibration primarily corrected the white balance and removed the previously noticeable warm cast. After the correction, whites no longer had a yellow tint and colours became more neutral and natural. The biggest improvement was seen in SDR material, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the image became more controlled, although not all of the TV’s limitations could be eliminated. The main issue remained intense reds, which were not always reproduced with sufficient precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations are still clearly visible.

The problem of the previously mentioned colour connections can largely be mitigated thanks to the "distortion reduction" function, which is an algorithm for smoothing tonal transitions in Philips. It works best at a low level – effectively eliminating unwanted colour bands while not introducing strange artifacts or losing image detail. This is one of those features that is truly worth keeping on.

The issue of upscaling is somewhat less impressive. Images from lower resolution can be too soft, while in some parts the characteristic "jaggies" appear. The impression is that the algorithm is trying to reconcile two contradictory directions – smoothing and sharpening – and ultimately fails to find the golden mean. As a consolation, it's worth noting that the television does not have problems with overscan, meaning it does not cut off the edges of the image, which can sometimes happen in other competing models.

Upscaling and digital image processing perform quite well in the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution material, and you can easily turn off overscan regardless of the source. The TV also handles compression artefacts well. The "Smooth Gradation" function can effectively reduce visible banding and tonal unevenness, but it isn't always precise. At higher settings it can also smooth out fine details, such as the texture of materials. A plus is that it doesn't remove film grain. The safest option is the "Low" or "Medium" setting, which offers the best compromise between artefact reduction and preserving detail.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of blurring or smearing, ideal for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here we see the phenomenon of so-called frame skipping. This means that the television is unable to display all the frames – some of them are skipped, causing motion to lose smoothness and double outlines to appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The LG MRGB85 is fitted with a VA panel with a native 144 Hz refresh rate, so its motion handling is very good. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sport, where camera motion is noticeably smoother than on basic 60 Hz panels. There’s also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for live sports and TV programmes. The adjustment range is wide, so you can easily tailor the motion smoothing to your own preferences.

If someone is looking for a TV for gaming, the Philips OLED770 is a candidate that's hard to overlook. The mere fact that this is an OLED gives it a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they've been taken straight out of a cinema. Added to that is the Ambilight system, which uses LEDs on the back of the TV to extend the image onto the wall behind the screen. The effect is such that even just playing FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really thick. On the technical side, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and for those using an Xbox Series X, Dolby Vision support in games is also available. You just need to know that in this mode, the input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we also get the 'Game Bar', which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows for a quick view of key parameters without exiting the game. Overall, this gives a picture of a TV that has all the most important gaming features on one hand, and on the other can add something unique – Ambilight. And it's this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.

When it comes to gaming, the LG MRGB85 performs by far the best. The manufacturer hasn’t skimped on the kit and has essentially carried over the full suite of features from pricier TVs into this model. You get three HDMI 2.1 ports with full 48 Gb/s bandwidth. Each supports 4K 120 Hz from a console, and when connected to a PC also 4K 144 Hz. So you don’t need to worry which port to plug your console or PC into, as they all offer the same set of capabilities.

On board you’ll also find VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM and HGiG. Dolby Vision Gaming is included too, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it off is Game Optimizer, a handy in-game menu. Without leaving the game you can change the picture profile, brighten shadow detail or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as significantly more expensive LG models.