Panasonic W70A vs Philips OLED910

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “explode” with light appear rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the plus side, the HDR effect is at least stable. The TV does not suffer from excessive brightening nor lose details with sudden scene changes. Everything is predictable and calm, though unfortunately lacking in impact. Another issue is the colour gamut coverage. The W70A is not equipped with an additional layer of quantum dots (often known as QLED), which is why the colours appear rather average. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has branded as "META OLED". It is this panel that allows for over 2000 nits of brightness in films, which not long ago was completely unachievable in OLEDs. The way the television handles full-screen scenes flooded with bright light also deserves high praise. Usually, in OLEDs, brightness drops significantly, but here it remains at a great level – around 1400 nits. These values are almost reference-level, and combined with excellent colour reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The Panasonic W70A was tested in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget televisions, reality turned out to be far from ideal.

In HD (SDR) content, the white balance was significantly disrupted by an excess of red and a noticeable drop in blue tones. The result? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR materials, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, 'drifting' towards warmer shades in SDR and cooler ones in HDR. In terms of brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting the balance and leading to a loss of detail in both darker and brighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that solid calibration is needed to extract the full potential from this television.

Unfortunately, when it comes to colour reproduction straight out of the box, the Filmmaker mode on the OLED910 really falls short. The television overemphasises the blue colour and at times it looks almost like a shop mode. It gives the impression that the manufacturer hasn't quite calibrated the device properly. The result is that colours appear unnatural, and the overall look resembles a slightly exaggerated display from a store showcase. HDR content looks much better, where apart from a slight loss of detail in blacks, there’s hardly anything to complain about. The problem is that in everyday viewing, it’s actually SDR materials that matter the most – and on the OLED910, they just look poor and significantly deviate from what we would expect from a television of this class.

Panasonic W70A, despite its limitations, gave us plenty of room to manoeuvre during calibration. Thanks to well-developed tools, we were able to achieve a much better white balance in both HD (SDR) and 4K HDR content. The issues with excessive red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristics have also been improved, now maintaining stability and not leading to excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide colour gamut means the television cannot fully convey colours in HDR materials. There is a lack of saturation, and subtle colour transitions still appear somewhat “flattened.” Another limitation is the brightness management due to the IPS panel used. In a comparison photograph with an actress's face in colourful clothing, it is clearly visible how some shades are distinctly muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as it could. The image is now much more natural, and the factory setting errors have been effectively corrected. Unfortunately, the hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

Fortunately, it quickly turned out that it wasn't the panel causing the problems, but the way Philips factory-tuned the OLED910. After calibration, the television showcased its full potential, and only then could we see what the new panels from LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, successfully taming the excessive blue and giving the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to ideal and colours presented in line with the creators' intent. In SDR content, the effect was stunning, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colours fuller and more accurate. After calibration, the OLED910 transformed from a disappointing television into equipment that can be confidently referred to as reference-grade in terms of colour accuracy.

We checked how the Panasonic W70A handles upscaling content that is lower quality than 4K, and I must admit that the TV performs quite decently in this regard. The feature responsible for smoothing tonal transitions is called "Zeroing Counter." The optimal setting turned out to be the Average option, which effectively smooths out colour gradation issues while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test chart with the model looked positive – details in her clothing were well reproduced, and the contours of her face maintained sharpness. In the background, we noticed a slight "jagginess" on thin branches, but these are details that only a very attentive eye will catch. However, it's worth noting a certain quirk of this model – the TV has a tendency to overscan, meaning it slightly crops the edges of the image. It’s not a very intense phenomenon, and for most users, it will be practically unnoticeable, but if we care about perfectly framing the shot, it's worth keeping this in mind.

The previously visible colour connections can be largely mitigated thanks to a feature called "distortion reduction." Similar to the OLED820, it’s best to set it to medium level, as it then provides quite decent results – smoothing unwanted tonal transitions while not taking away too many details from the image. Although at times the effect may be a bit too aggressive, in everyday viewing, this function can be considered useful.

When it comes to image scaling, the OLED910 performs really well. The test material with the model showcased a characteristic soft look typical of Philips – at times almost too soft – but at any moment this can be adjusted with the sharpness slider to tailor the image to your own preferences. It’s also a plus that the television has no issues with overscan, which still occurs in some competitors' models. It’s a minor detail, but it’s pleasing as it means that all content, even the oldest, is displayed as it should be.

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the TV is best suited for watching movies, series, or everyday television content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called “Effect”, which offers three levels of adjustment – low, medium, and high.

Each setting allows you to adjust the smoothness of motion to your own preferences, minimizing the motion blur effect and improving the clarity of dynamic shots. In practice, the Medium setting seems to be the most universal – it offers better smoothness without the excessive “soap opera effect” that can look artificial in feature films. The High setting may work well for sports broadcasts, but in movies, it can disrupt the natural character of motion.

OLED910 is a TV with a refresh rate of 144 Hz. It’s a bit of a shame that Philips didn’t opt for 165 Hz, as we know that the matrix used in it is capable of that. On the other hand, such a bonus will mainly benefit PC gamers, as for everyday use, the most important thing is the 120 Hz refresh rate, which is fully sufficient. Combined with the advantages of the OLED matrix – lightning-fast pixel response times and the absence of motion blur, the picture is impeccably sharp and fast, even in dynamic action scenes. The traditional motion smoother from Philips called “Motion Style” also deserves praise. We can easily adjust it to our own preferences: the “Smoothness” slider is for movies and allows you to choose between a more “framey,” cinematic character and a smooth, theatrical image. Meanwhile, the “Motion Blur Reduction” slider is intended for sports; here, it’s worth setting it to the maximum value so that the image is clear and sharp during very fast shots.

The Panasonic W70A is a TV that is likely to suit casual gamers more than hardcore players. The 60 Hz refresh rate doesn't fully utilise the potential of next-gen consoles, especially in dynamic titles. The lack of HDMI 2.1 slightly limits its capabilities, but fortunately, it includes features like ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It's also worth noting the support for Dolby Vision in games and HGiG, making HDR more predictable and looking solid. It's a pity, though, that it lacks Game Bar. This feature is now standard in many TVs and provides quick access to the most important settings for gamers. The W70A performs well for gaming, but it does have its limitations. It will do fine with more laid-back titles, but more demanding gamers may feel unsatisfied.

The OLED910 is fantastic for gaming. It supports 144 Hz, so if someone has a powerful PC, they'll easily make the most of that potential. For consoles, the most important thing is still 120 Hz, and everything works smoothly here. It has VRR, an automatic game mode, and even Dolby Vision in games along with HGiG mode, so we pretty much get a full package of gaming features. Philips also added a Game Bar, which is like a quick menu that shows basic information and allows you to enable a few handy features. It might not look as modern as the competition, but it works and does its job. The only downside is the number of HDMI 2.1 ports. There are only two, which can be quite disappointing in this class of television. If someone connects two consoles and something extra to the eARC - like a soundbar (which doesn't really make sense in this model, but more on that in the sound section), they'll have to do a bit more figuring around. Other than that, though, the OLED910 has everything we expect from a gaming TV.