Panasonic W70A vs Philips OLED770

HDR on the Panasonic W70A unfortunately does not impress. A brightness level of 250–300 nits is simply too low to feel the true magic of cinematic effects in dynamic, bright scenes. Images that should “explode” with light appear rather flat, and fine details in bright areas often get lost in the average luminance of the panel. On the plus side, the HDR effect is at least stable. The TV does not suffer from excessive brightening nor lose details with sudden scene changes. Everything is predictable and calm, though unfortunately lacking in impact. Another issue is the colour gamut coverage. The W70A is not equipped with an additional layer of quantum dots (often known as QLED), which is why the colours appear rather average. There is a lack of depth in reds, saturation in greens, and precision in reproducing subtle shades.

The Philips OLED770 doesn't try to compete with the brightest OLEDs on the market, and it's actually hard to expect that, as it's the entry-level model in Philips' range for 2025. In our measurements, it reached a maximum of around 700 nits, which allows for enjoyment of HDR effects in scenes where light appears in spots – for instance, in the flash of headlights or a starry sky. In such moments, the picture can truly amaze. However, it's different when there are more bright elements on the screen. The TV, like many cheaper OLEDs, restricts luminance at that point, and the entire image noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil platform – the brightness dropped to around 250 nits, which is almost three times less. The HDR effect remains pleasing to the eye, but it's worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 also has an ace up its sleeve – the coverage of the DCI-P3 colour palette is as high as 99%, so colours in movies and games are vibrant and very close to what the creator intended.

The Panasonic W70A was tested in movie mode, which theoretically should guarantee the most natural image reproduction. Unfortunately, as is often the case with budget televisions, reality turned out to be far from ideal.

In HD (SDR) content, the white balance was significantly disrupted by an excess of red and a noticeable drop in blue tones. The result? The image had a distinctly warm, almost yellowish glow, which is clearly visible in the comparison photo. In the case of 4K HDR materials, the situation reversed. Here, the image became excessively cold and bluish, causing scenes to lose their naturalness and depth. The differences are visible even to the naked eye, especially in the bright areas of the image. The Colour Checker palette test confirmed our observations. Most colour samples did not hit their intended points, 'drifting' towards warmer shades in SDR and cooler ones in HDR. In terms of brightness characteristics, both gamma and the EOTF curve showed significant issues. The image tended to excessively brighten certain areas, disrupting the balance and leading to a loss of detail in both darker and brighter regions.

In summary – the factory colour reproduction settings in the Panasonic W70A leave much to be desired. The image is far from neutral, and errors in white balance and gamma mean that solid calibration is needed to extract the full potential from this television.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve, even in Filmmaker mode. The white balance chart clearly indicates a lack of blue, giving the image a slightly yellowish tint. In practice, white is not snow-like, but leans towards warmer hues – which some may even find appealing, but from a precision standpoint, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is around 2.6 instead of the reference 2.4. In mid-tones, the image appears muted and more saturated, which can look too "cinematic" but detracts a bit from the naturalness. However, the most significant issues are visible in colour reproduction. The average error is relatively high, and some colours – particularly shades of grey – deviate significantly from what should be seen. In everyday viewing, this means that sometimes colours may look less natural than we would wish.

Panasonic W70A, despite its limitations, gave us plenty of room to manoeuvre during calibration. Thanks to well-developed tools, we were able to achieve a much better white balance in both HD (SDR) and 4K HDR content. The issues with excessive red in SDR and overly cool images in HDR have disappeared. The gamma brightness characteristics have also been improved, now maintaining stability and not leading to excessive brightening or loss of detail in darker areas.

So where is the problem? Unfortunately, there are barriers that even professional calibration cannot overcome. Poor coverage of a wide colour gamut means the television cannot fully convey colours in HDR materials. There is a lack of saturation, and subtle colour transitions still appear somewhat “flattened.” Another limitation is the brightness management due to the IPS panel used. In a comparison photograph with an actress's face in colourful clothing, it is clearly visible how some shades are distinctly muted, and colours lose their depth and vibrancy.

Calibration has extracted from the W70A as much as it could. The image is now much more natural, and the factory setting errors have been effectively corrected. Unfortunately, the hardware limitations in the form of poor colour gamut coverage and an average panel mean that even after calibration, we are unable to achieve spectacular effects, especially in HDR content.

Philips OLED770 had shown signs from the start that it harboured significant potential, but it was hard to fully appreciate this in its factory settings. The image was often too warm, and some colours appeared as if they had lost their naturalness along the way. Calibration revealed that this television was very amenable to work – it responded to every adjustment and almost immediately unveiled another layer of its capabilities. The white balance was set in both SDR and HDR so that the yellowish haze disappeared and a neutral, clear white emerged. Gamma stabilised closer to perfection, which helped restore the naturalness of mid-tones, while shadows ceased to be artificially darkened, perhaps even with a slight brightening effect. The result was obvious... Movies are watched with greater ease; the image has cinematic depth without the feeling that something is overly darkened. However, the most interesting aspect was working on the colours. Factory errors were not dramatic, but slightly noticeable – skin tones could be too warm, and grey wasn’t always the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level that is definitely lower than the threshold of discernibility for the human eye. In other words, after correction, the colours finally “clicked” into place. Looking at the screen, we felt like the television had begun to speak with a full voice. Like an instrument that had finally been properly tuned.

We checked how the Panasonic W70A handles upscaling content that is lower quality than 4K, and I must admit that the TV performs quite decently in this regard. The feature responsible for smoothing tonal transitions is called "Zeroing Counter." The optimal setting turned out to be the Average option, which effectively smooths out colour gradation issues while not ruining the film grain. This is the setting we recommend for most users, as it provides a balance between enhancing the smoothness of transitions and maintaining the naturalness of the image.

When it comes to image scaling, the Panasonic W70A performed really well. The test chart with the model looked positive – details in her clothing were well reproduced, and the contours of her face maintained sharpness. In the background, we noticed a slight "jagginess" on thin branches, but these are details that only a very attentive eye will catch. However, it's worth noting a certain quirk of this model – the TV has a tendency to overscan, meaning it slightly crops the edges of the image. It’s not a very intense phenomenon, and for most users, it will be practically unnoticeable, but if we care about perfectly framing the shot, it's worth keeping this in mind.

The problem of the previously mentioned colour connections can largely be mitigated thanks to the "distortion reduction" function, which is an algorithm for smoothing tonal transitions in Philips. It works best at a low level – effectively eliminating unwanted colour bands while not introducing strange artifacts or losing image detail. This is one of those features that is truly worth keeping on.

The issue of upscaling is somewhat less impressive. Images from lower resolution can be too soft, while in some parts the characteristic "jaggies" appear. The impression is that the algorithm is trying to reconcile two contradictory directions – smoothing and sharpening – and ultimately fails to find the golden mean. As a consolation, it's worth noting that the television does not have problems with overscan, meaning it does not cut off the edges of the image, which can sometimes happen in other competing models.

The Panasonic W70A is equipped with a 60 Hz panel, which immediately suggests that the TV is best suited for watching movies, series, or everyday television content. In more dynamic scenes, such as sports broadcasts or games, the limitations of the panel become more noticeable. However, it is worth noting the presence of a motion smoother called “Effect”, which offers three levels of adjustment – low, medium, and high.

Each setting allows you to adjust the smoothness of motion to your own preferences, minimizing the motion blur effect and improving the clarity of dynamic shots. In practice, the Medium setting seems to be the most universal – it offers better smoothness without the excessive “soap opera effect” that can look artificial in feature films. The High setting may work well for sports broadcasts, but in movies, it can disrupt the natural character of motion.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an additional mode for PC gamers at this price? However, the reality turned out to be more complex. With 120 Hz content, the television behaves like most OLEDs – the image is absolutely clear, with no trace of blurring or smearing, ideal for both dynamic games and sports broadcasts. The problem only arises at 144 Hz. Unlike models with official support for this frequency, here we see the phenomenon of so-called frame skipping. This means that the television is unable to display all the frames – some of them are skipped, causing motion to lose smoothness and double outlines to appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The Panasonic W70A is a TV that is likely to suit casual gamers more than hardcore players. The 60 Hz refresh rate doesn't fully utilise the potential of next-gen consoles, especially in dynamic titles. The lack of HDMI 2.1 slightly limits its capabilities, but fortunately, it includes features like ALLM, which automatically switches to game mode, and VRR, which helps minimise screen tearing. It's also worth noting the support for Dolby Vision in games and HGiG, making HDR more predictable and looking solid. It's a pity, though, that it lacks Game Bar. This feature is now standard in many TVs and provides quick access to the most important settings for gamers. The W70A performs well for gaming, but it does have its limitations. It will do fine with more laid-back titles, but more demanding gamers may feel unsatisfied.

If someone is looking for a TV for gaming, the Philips OLED770 is a candidate that's hard to overlook. The mere fact that this is an OLED gives it a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they've been taken straight out of a cinema. Added to that is the Ambilight system, which uses LEDs on the back of the TV to extend the image onto the wall behind the screen. The effect is such that even just playing FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really thick. On the technical side, it's also quite decent. The Philips OLED770 supports variable refresh rate (VRR) up to 120 Hz, has an automatic mode for gamers (ALLM), and for those using an Xbox Series X, Dolby Vision support in games is also available. You just need to know that in this mode, the input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we also get the 'Game Bar', which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows for a quick view of key parameters without exiting the game. Overall, this gives a picture of a TV that has all the most important gaming features on one hand, and on the other can add something unique – Ambilight. And it's this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.