LG UR781 vs Hisense E7Q PRO / E79Q PRO

In HDR mode, LG UR781 unfortunately does not impress with its brightness. In tests on five screens, the television achieved only around 200 nits, which is quite a low value for HDR standards. This brightness is comparable to levels typical for SDR, which means that HDR effects are not sufficiently vivid, and the picture may look less impressive, especially in dynamic, bright scenes. In HDR mode, it has certain limitations in colour reproduction. This means that colours may not be as intense and rich as in televisions that handle a wider colour gamut better. In practice, this can make the image less vibrant and dynamic, and HDR effects may not be as spectacular as one might expect. Additionally, UR781 LG has some issues with accurate colour representation in HDR mode, which makes content look less lively.

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

Colour reproduction in LG UR781 in Filmmaker Mode, which although it is the best mode available from factory settings, is not without its flaws. First and foremost, the issue is with white balance, where the graph shows dips in the blue colour level. This phenomenon results in a shift towards yellow hues, making the image warmer than it should be. Such deviation means that the colours on the screen are not reproduced naturally, which may be particularly noticeable in scenes with white or neutral backgrounds. This can be confirmed by the Color Checker Test, which showed that some colours "escape" into other shades, indicating that the LG UR781 TV does not display colours accurately. This distortion can affect visual experiences, making film scenes seem less realistic and details may be displayed in incorrect colours, negatively impacting overall picture quality.

In terms of contrast, analysis of the gamma graph revealed drops to a level of 2.0, while the optimal value should be 2.4. This means that the TV may display darker parts of the image brighter in some scenes, reducing their depth and dynamism. Additionally, on the EOTF curve, which is responsible for brightness reproduction, an unnatural spike was noticed at the beginning. This phenomenon may result in excessive brightness boosting in the brightest parts of the image, leading to a loss of details in very bright scenes.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

After calibration, colour reproduction in SDR content is quite good. The white balance has been effectively improved, resulting in natural, balanced hues across different scenes. The gamma has also been adjusted, providing a more precise representation of details in the shadows and bright areas of the image. As a result, the LG UR781 TV performs well in everyday use, offering solid colour quality and clear, well-balanced images in SDR mode.

However, the situation is less favourable for HDR content. The LG UR781 TV does not support a wide colour gamut, which limits the depth and richness of colours that HDR can provide. The EOTF curve deviates from the ideal, leading to excessive highlighting of details in the bright areas of the image. Unfortunately, this approach results in significant colour reproduction errors, as confirmed by tests on the Colour Checker. Additionally, the low brightness level of the panel further negatively impacts HDR image quality, causing the effects of dynamic range to not be fully realised and colours to appear washed out.

Despite some shortcomings in HDR mode, the TV has significantly improved after calibration, especially in SDR content. The enhancement of white balance and gamma has notably increased image quality, providing a more natural and cohesive colour reproduction. Compared to its pre-calibration state, the difference is clear, and the LG UR781 TV now offers better performance in everyday use, particularly in standard dynamic range.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

Let's now address the function of smoothing tonal transitions and its impact on overall picture quality. As illustrated by the photo on the left, this function performs exceptionally mediocre; we chose the "low" level, which does not enhance quality but also does not blur the film grain. There is a possibility to increase the strength of this function, which could soften this gradation, but one must consider that the image will be too softened in certain scenes.

On the other hand, regarding image scaling, the television does not perform outstandingly, which may be particularly noticeable with lower resolution content. The LG UR781 television applies a slight, artificial sharpening boost, making the image appear sharper; however, this mainly results from the application of artificial contours. For some users, this may be an advantage, as they prefer more vivid, pronounced details. However, this is a subjective matter—such an effect may not appeal to everyone, especially if they desire a more natural appearance of the image.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

The LG UR781 TV offers quite decent smoothness for movies, thanks to the "True Motion" option, which allows users to adjust the motion smoothing level on a scale from 0 to 10. Users can choose whether they want to maintain a more traditional, cinematic effect with a slight stutter (lower settings) or prefer a smoother image with a theatrical quality, which, although slightly deviating from the cinematic standard, may appeal to many.

In dynamic sports content and gaming, the LG UR781 TV performs worse. The TV has a 60Hz panel, which limits its interpolation capabilities to these values; therefore, smoothness can be improved in films, but motion blur cannot be reduced. Additionally, the lack of support for 120 Hz and BFI (Black Frame Insertion) technology means that fast-moving objects become blurred, and the panel's response time is too slow, negatively affecting clarity in fast scenes. As a result, the TV may not meet the expectations of gamers and sports fans who are counting on a smooth, clear image without motion blur.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

When playing on a console, the LG UR781 TV offers several significant features that can affect the gaming experience, but it also has some limitations. On the plus side, it includes ALLM (Auto Low Latency Mode), which automatically optimises the picture settings by switching the LG UR781 TV to low latency mode, which is beneficial for gamers. The TV also supports correct implementation of HGiG, meaning HDR games look as intended by the creators.

Unfortunately, it lacks support for Variable Refresh Rate (VRR), which can result in worse gameplay smoothness, especially in more dynamic games. It also does not support Dolby Vision mode for gaming, which limits HDR picture quality in games using this format. The TV has a 60Hz panel, so it does not support higher frequencies at other resolutions, such as 1080p@120Hz, 1440p@120Hz, or 4K@120Hz, which is a significant downside for gamers expecting smoother gameplay at higher resolutions. There is also no support for G-Sync technology, which limits image synchronisation in games.

On the positive side, the presence of a Game Bar feature allows for quick access to settings for gamers and makes it easier to adjust picture parameters during gameplay.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.