LG NANO81A / NANO80A vs Hisense E7Q PRO / E79Q PRO

If you're hoping that HDR on the NANO81A will bring tears to your eyes, I have to disappoint you. This TV is just too dark to show what this format is really about. With a brightness of only 250 nits, HDR really only exists on paper here. In practice, during viewing, it's very hard to tell whether we're watching material in high dynamic range or regular SDR – it simply lacks that “punch” of light in the bright parts of the image. But, to balance out the criticism, we do have one light at the end of the tunnel – and quite a distinct one at that. It's about colour gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. That's a really solid result, placing this model significantly above typical budget models based on regular white LEDs without any filters. Of course, it still lags a bit behind QLED TVs or advanced panels with PFS filters, but for this price range, the colours are surprisingly saturated and vibrant. It’s just a shame that this low brightness doesn't allow them to fully “spread their wings” with the Nano filter.

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

For every film fan, the natural choice in LG televisions is the Filmmaker Mode. It is designed to show the image as the director intended – without unnecessary "enhancements". Unfortunately, in the case of our test unit NANO81A, the factory settings left a bit to be desired. The main issue turned out to be the white balance. Measurements revealed a distinct deficiency of blue, which in practice meant that many scenes had a slightly yellowish, even "yellowed" tint. The white wasn’t perfectly clean, which took away the freshness of the image. Additionally, the brightness management wasn't perfect either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, which detracted from its naturalness and depth. Fortunately, LG, even in this relatively low price range, does not block access to advanced settings. The calibration options for this model are extensive, which is a significant plus for those who enjoy "fiddling" in the menu. We decided to approach the matter our way and see how much we could squeeze out of this panel with professional calibration.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

After calibration, the NANO81A is a completely different television. What LG offers in terms of image enhancement tools, even in such an affordable model, deserves major credit. We were able to completely eliminate that annoying yellowing of whites and make the colours natural, vibrant, and simply "real". In SDR content (i.e., regular television, YouTube, or older films), the picture now looks miles better – it’s clean, well-balanced, and no longer strains the eyes with strange hues. It’s clear that this panel has significant potential, which is simply wasted out of the box due to poor presets. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The LG algorithm in this model is very conservative. The TV deliberately dims the HDR image to avoid clipping the already weak blacks of the IPS panel. The developers faced a choice: either provide more light and accept that black would become light grey, or dial down the brightness to maintain any contrast. They chose the latter. Despite this, after our adjustments, watching anything on the NANO81 is considerably better.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

It often happens that cheap 4K panels ruthlessly expose all the "dirty laundry" and imperfections in lower resolution materials. However, with the LG NANO81A, the situation is completely different. It's a really solid performer when it comes to handling content that's far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature, which you can find in the settings. It is exceptionally effective in combating colour banding, which is a godsend when watching low bitrate materials, such as from some streaming services or older files from the web. However, it is worth maintaining a certain vigilance. Since we are dealing with a less powerful chip than in LG's top models, too aggressive a setting for this option can sometimes result in minor artifacts or slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

In terms of motion fluidity, the NANO81A unfortunately has a bit of a hurdle. The television is based on a panel with a refresh rate of 60Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat dissatisfied. With such a low native refresh rate, fast objects on the screen will always be a bit blurry.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

NANO81A is unfortunately not a device designed with esports in mind. The lack of 120 Hz signal support is a fact that users planning to purchase this model simply have to accept. Nevertheless, LG’s engineers have worked hard to squeeze the maximum potential from this 60 Hz panel, offering a set of features that genuinely improve gaming comfort. First and foremost, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. This ensures that the image remains stable and does not "tear," and the device automatically switches to low latency mode as soon as it detects a signal from a console. Managing these settings is extremely simple thanks to a dedicated system overlay that allows for a quick preview of parameters without leaving the game. A very significant advantage is support for the HGiG format. This solution is crucial for owners of modern consoles, as it allows the television to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown-out" bright spots, such as clouds or light sources, which is unfortunately a common issue in budget LCD televisions.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.