Hisense UR8S vs Samsung The Frame 2026 (LS03H)

UR8S is a higher-end Mini-LED, so you could expect plenty of brightness. Indeed, on a synthetic test pattern peak brightness reached about 2200 nits. That’s a very good result, but as always what the TV does in normal film scenes matters much more. Here the results are a bit more mixed. In bright scenes with lots of light on screen, the UR8S can deliver very strong HDR. Brightness then gets up to around 1500 nits, so the image is very intense and has a lot of punch. It’s worse with small bright elements on a dark background. The TV noticeably dims them to preserve deep blacks and avoid excessive blooming. As a result, things like single stars or small specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost — sometimes it sacrifices the brightness of small details too much in favour of contrast.

Colours

For RGB Mini-LED TVs, colours should be evaluated a little differently than usual. If we look only at the panel’s capabilities, the UR8S performs excellently. We measured about 94% coverage of BT.2020 and virtually full DCI-P3. Those are among the highest figures currently seen in LCD TVs, and this is where the potential of the RGB backlight is most apparent. The problem is that this potential isn’t always used in real scenes. When we ran the same measurements on patterns overlaid with a film-like background, saturation of some colours started to fall noticeably. Individual zones can’t always control the three RGB components with the same precision when the scene becomes more complex. It’s most noticeable with blue and magenta. On simple test patches they can look very strong, but in tougher scenes samples of those colours clearly shrink. In other words, the UR8S has huge potential, but the TV can’t always take full advantage of it in every scene.

The Frame 2026 is a genuinely bright TV. Its peak brightness reaches around 650 nits and, importantly, it maintains similar levels regardless of the type of scene being displayed. It doesn’t really matter whether we’re watching a very bright full-screen image or just a small highlight occupying part of the screen. The backlight remains powerful, allowing bright parts of the image to stand out clearly.

This gives The Frame a solid foundation for HDR. Bright highlights can look impactful, and the picture doesn’t appear flat or overly dim. Unfortunately, there is a compromise. Without local dimming, the TV cannot darken the black areas surrounding very bright objects.

This is clearly visible in scenes 2 and 4 of our test procedure. Bright elements look impressive, but at the same time, the blacks around them become noticeably raised. As a result, the image loses some of its depth, especially when watching in a dark room. This is why The Frame performs best with HDR in bright and moderately bright scenes, where its high brightness works to its advantage. In darker scenes, the situation is quite the opposite.

Colours

The Frame also performs well when it comes to colour reproduction. As a QLED TV, it can display a wide colour gamut and produce rich, saturated colours. DCI-P3 coverage reaches around 94%, while BT.2020 comes in at around 72%. These are good results, and you can see the difference in actual content.

Colours look vivid without appearing washed out, particularly in bright and colourful scenes. Animations and other content with plenty of saturated colours can look really good on The Frame. With this type of material, the TV shows one of its stronger sides.

For evaluating the factory colours we used Filmmaker mode, which is supposed to show the image as close as possible to how the content was prepared. And if you look at the white balance alone, the UR8S performs quite well. There’s no strong tint that immediately jumps out, although as brightness increases a bit too much blue and red start to appear, with a corresponding lack of green. Colour errors are therefore visible in measurements, but the image itself doesn’t look bad.

We have much bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the picture loses some depth. A similar tendency is visible in HDR. The EOTF curve sits above the reference value for a large part of the range, so the UR8S again brightens the image more than it should. This isn’t a case of the TV lacking brightness, because it has plenty, but of how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

For assessing the factory colour setup we chose the Filmmaker Mode. If you’re encountering it for the first time, it’s a mode designed to reproduce films and TV shows as faithfully as possible. The TV then turns off most additional image enhancers, and the colours and luminance response are intended to be as close as possible to what the creators intended. And it must be said that The Frame 2026 performs quite well in this respect straight out of the box. The biggest deviation is seen in the white balance. As brightness increases, blue starts to fall short and there’s a slight increase in green. As a result, the image shifts towards warmer tones. So white isn’t perfectly neutral, and in some scenes you can notice a subtly warmer cast.

The luminance response, both gamma and EOTF, looks pretty good. Through most of the range they stay fairly close to the target, although larger deviations are visible in the darkest parts of the image. In practice, some shadow details emerging from black may therefore be a bit more pronounced. However, it’s not an error that jumps out during normal viewing. Overall, Filmmaker Mode is a good starting point here. However, the factory picture is a bit too warm and not all hues land exactly where they should.

Hisense offers quite a lot of calibration options, and in SDR you can achieve a really good result with them. After adjustment the white balance is practically even across the whole range, and colour errors fall to very low values. The UR8S can be set very precisely here. HDR looks a little different. The white balance can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. Most interesting, however, is the behaviour of the EOTF curve. Even after correctly setting it on test patterns, the UR8S can still interpret brightness in its own way when watching films. Depending on the scene, parts of the picture are slightly brightened and others darkened compared with how they should look. This shows that the algorithms controlling the backlight have quite a large influence on the final image. Calibration therefore allows colours to be improved very well, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

After calibration we mainly managed to remove that warmer tint and better even out the white balance. We also smoothed the brightness response a bit, which made the picture more neutral and predictable. There are, however, things calibration won't fix. It's mainly the black performance, which comes from the backlight design and the lack of local dimming. In some scenes the blacks will therefore still be slightly lifted, and you just have to accept that. It's more a characteristic of this model than something you can fix with the settings. HDR is also somewhat limited. Samsung doesn't give full freedom to work across the widest colour gamut here, so not all colours can be reproduced perfectly. In normal viewing it will probably be hard to notice, but it's worth being aware of.

The big plus of the UR8S is its use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model’s stronger points. The TV handles smoothing tonal transitions very well, especially with poorer-quality material. The feature responsible for this effect works effectively without overprocessing the picture. Even on a medium setting it can noticeably reduce visible banding and artefacts without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t over-sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

As with many of Samsung’s newer TVs, this one also uses the NQ4 AI processor, albeit the older, second-generation version. I must admit it handles digital image processing quite well. Lower-resolution material is sharpened effectively, and when upscaled to 4K it still looks natural. The TV can also tidy up weaker sources a bit, such as older recordings or lower-quality broadcasts. That doesn’t, of course, mean it will suddenly turn poor footage into true 4K, but at close viewing distances the difference compared with simpler models with weaker processors is easy to spot. Edges are clearer and fine details aren’t lost as much to signal compression.

Samsung also provides a few extra picture-enhancing features, but as usual it’s best to use them sparingly. At stronger settings, noise reduction can very effectively reduce posterisation, but it also noticeably interferes with the image. The picture then starts to look quite artificial, for example by heavily smoothing faces. So these features make most sense with really poor sources when all the noise is very distracting.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so right away it offers very strong potential for smooth motion. The panel itself performs really well, although some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but during faster motion, especially on darker backgrounds, it can still be noticed, particularly if you compare the same image to OLED TVs.

Samsung again used a panel here with a maximum refresh rate of 144 Hz. Refresh rates up to 120 Hz mainly offer greater flexibility with high-motion content. The TV can use additional motion smoothing systems that can improve smoothness in sports and other fast-paced content. However, a high refresh rate alone does not solve everything. The Frame still uses a VA panel, which has a fairly slow response time, resulting in quite pronounced motion blur. With fast-moving objects, especially against dark backgrounds, the trails are easy to notice. There's also a slight double-imaging of edges, which can be visible even after turning off additional motion enhancement systems. We already saw similar behaviour in last year's The Frame 2025, and it's a shame Samsung hasn't fixed this. The 144 Hz itself provides a good foundation, but the panel's response time still limits this TV.

In terms of gamer features the UR8S stacks up really well. The TV supports virtually everything you'd expect from a modern console or PC display. It has ALLM, VRR, and 4K at 120 Hz. There's also Dolby Vision in game mode, so when using, for example, an Xbox Series X you don't have to give up that HDR format. PC gamers get even more options. The panel can run at 4K and 180 Hz, and dropping to Full HD can push the refresh rate as high as 330 Hz. There's also a Game Bar that lets you quickly view key info and change gaming-related settings. The only real shortcoming is a proper implementation of HGiG. When enabled, the TV still interferes with HDR brightness mapping, so we don't get the effect intended by that standard. Apart from that, the UR8S is very well equipped for both consoles and a powerful PC.

When it comes to gaming features, The Frame is practically on par with Samsung’s flagship TVs. Once a console is connected, the TV automatically switches to Game Mode thanks to ALLM, so there’s no need to change the settings manually every time. There’s also VRR, which matches the screen’s refresh rate to the frame rate generated by the console or PC. When the frame rate drops, this helps prevent the characteristic screen tearing that can otherwise occur.

The Frame naturally supports 4K at 120Hz, allowing you to take advantage of higher frame rates on the PlayStation 5 and Xbox Series X. HGiG also works correctly. Once HDR has been properly calibrated on the console, the TV doesn’t try to additionally brighten the image on its own, so bright highlights in games are displayed as they should be.

Samsung also includes its Game Bar. This quick-access menu can be opened without leaving the game and lets you check things like VRR operation or the current frame rate, while also giving you quick access to the most important gaming settings. PC users get even more flexibility, as the Full HD mode mentioned earlier allows the refresh rate to be increased all the way up to 240Hz.

There is really only one feature missing, and by now it’s something we’ve come to expect from Samsung TVs: Dolby Vision Gaming. Xbox owners will notice this the most, as Xbox consoles can actually use Dolby Vision in supported games.

There is one more limitation worth mentioning that applies specifically to this model. The One Connect box has only one HDMI 2.1 port, so this is the only input you can use for a console or PC if you want to play at 4K 120Hz. Fortunately, Samsung hasn’t combined this port with eARC. This means you can connect a soundbar separately to HDMI 3 and still keep the full-bandwidth HDMI 2.1 port available for your console.