Hisense E7Q PRO / E79Q PRO vs Philips OLED811

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured about 1500 nits, which is a very good result for an OLED TV. You can see that clearly in films and series. Flashes of light have the right punch, especially when they appear on a dark background. In those scenes the OLED811 can deliver really impressive HDR. Of course this doesn't mean you'll see that level of brightness in every shot. When the screen is filled with a large area of white or a wide explosion, brightness falls to around 600 nits. That's still a good result, but such scenes don't have the same impact as small bright elements on a dark background. That's a known limitation of OLEDs and the OLED811 is no exception.

Colours

Aside from HDR brightness, colours also matter and here Philips also performs very well. It covers almost the entire DCI-P3 gamut, which contains most of the colours used in HDR films and series. So you get rich reds and lush greens, and while watching it's hard to fault it in that regard. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. There's also the issue of the white subpixel that the WOLED panel uses to help boost brightness. With very bright colours you can see a certain "washout": the colour is bright but loses some of its intensity. It's in exactly these situations that Samsung Display's QD-OLED panels have the advantage. In most films and series, though, this won't be something that immediately jumps out at you.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

The film mode on the Philips OLED811 is sensibly set up straight out of the box. Most colour errors remain minor in both SDR and HDR, so you can comfortably sit down to watch without adjusting the settings first. There are no large inaccuracies that would immediately distract from the film.

It’s not quite perfect, though. The white balance shows a slight lack of red relative to green, so whites and greys can have a faint greenish tint. It’s not a strong colour cast, but measurements clearly show it. There are also small luminance deviations in SDR: some parts of the image are slightly brightened, and the deepest tones aren’t always reproduced evenly. In HDR the TV stays much closer to the reference, although it occasionally lifts detail from the shadows. These are generally things that can be refined. The factory film mode provides a good starting point, and calibration will reveal how much more you can get out of it.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

After calibration the Philips OLED811 delivers an image very close to the reference. We managed to even out the white balance and remove the slight colour cast visible in the factory settings. ColorChecker errors for SDR and HDR fell to around 1 to 2, with many samples even below 1. That's a level at which differences from the reference are hard to spot with the naked eye. We also improved the gamma, with only a slight lift remaining in the brightest whites. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small details, such as stars or subtitles. That gives the picture a bit of extra brightness that shouldn't be there, but otherwise it's hard to find fault. It was already good out of the box, and calibration allowed us to iron out most of the remaining issues.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

The OLED811 handles processing lower-quality material reasonably well, though it's far from perfect. The "Banding reduction" function helps smooth tonal transitions and on the low setting gives a pretty good effect. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artefacts. It's a sensible setting for everyday viewing. Still, there's a bit of a letdown, because the MediaTek Pentonic 800 chipset used here can, in other manufacturers' hands, deal with the effects of heavy compression more effectively even at similarly low settings. A lot therefore depends on how a given manufacturer uses its capabilities.

We have a few more comments about the upscaling to 4K. There's plenty of detail, but overall the image looks rather soft. Edges are heavily smoothed, so the picture lacks some sharpness and clarity. You can partially correct this with the sharpness slider in the menu, though that will be extra edge enhancement rather than recovering detail. On the plus side, there's no overscan, and even with an SD signal the TV doesn't crop the edges of the picture.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

In terms of motion handling the OLED811 performs superbly. At 120 Hz, which is useful for console gaming and watching sport, the image remains clear and moving objects don't leave noticeable trails. The OLED's fast pixel response helps here. You can see it clearly in the UFO test, even on a dark background. There are also controls for motion smoothing. In movies you can adjust the strength of smoothing to your taste, from preserving a cinematic feel to much smoother motion. A separate blur-reduction control is useful for fast-paced content like live sports broadcasts.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.

The OLED811 has almost everything you’d expect from a TV for gaming. It supports 120 Hz at Full HD, 1440p and 4K, and when connected to a PC it can reach up to 165 Hz. It also offers VRR to help avoid screen tearing when frame rates fluctuate, and ALLM, which automatically switches to game mode. So you don’t have to go into the settings every time you start your console.

Another plus is the properly working HGiG, which ensures that once HDR is set on the console the TV doesn’t apply its own changes to image brightness. The Game Bar is also available, letting you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there’s a significant catch here, which you’ll read about below.