Hisense E7Q PRO / E79Q PRO vs Hisense A6Q

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

Unfortunately, the Hisense A6Q is hard to recommend for watching HDR content. The main issue remains the low brightness and quite modest coverage of a wide colour gamut. A measured brightness of about 300 nits simply isn't enough for HDR materials to look impressive. In practice, the image often resembles standard SDR rather than true HDR with clear differences in brightness and dynamics. Additionally, colours in such content do not appear as they should. The TV does not utilise additional filters like QLED or PFS LED, and a DCI-P3 coverage of around 80% makes some colours look just too pale. As a result, some scenes in HDR materials lose intensity and spectacle, making it hard to talk about a proper HDR experience.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

We conducted the tests in the best available mode, which is Filmmaker, however – as is often the case – this does not mean the image is perfect straight out of the box. In the case of Hisense A6Q, this mode clearly “swallowed” too much blue in everyday SDR content. In practice, this led to an image with yellowed whites, particularly noticeable on large, bright surfaces. This does not result from poor assumptions of the Filmmaker mode itself or from the vision of filmmakers, but from factory settings that require adjustment.
Additionally, looking at the saturation characteristics and gamma curve in SDR, as well as EOTF in HDR content, there is a slight tendency to brighten most scenes. As a result, the image often appears brighter than it should, losing a bit of its naturalness. For this reason, we decided to perform a professional calibration to restore the proper colour balance and a more accurate brightness characteristic.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

Colours after calibration on the Hisense A6Q need to be evaluated in two ways, as everything depends on the type of content. In the case of SDR materials, the effect is really quite good. In daily programs, series, and movies, it’s hard to find any serious issues with colours. The yellow tint has been effectively removed, and the television has also stopped washing out the entire image. As a result, the ColorChecker test showed errors below a Delta 2 value, which are already outstanding results, allowing for a discussion of very high picture quality in standard content. Unfortunately, the situation looks much worse for HDR materials. Yes, the white balance has been corrected and the EOTF curve has been improved, but the limitations of the panel itself remain insurmountable. The lack of support for a wide colour gamut means that the television still generates quite significant colour errors. Parts of the colours simply cannot be displayed by the screen, making them look less saturated than they should. It’s a pity because even a simple PFS or QLED filter would have resulted in a significantly better end effect. The conclusion is therefore simple – for SDR content, the A6Q after calibration works really very well, while viewing HDR content on it should still be approached with caution.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

Upscaling on the Hisense A6Q works really well for a TV in this price range. Lower resolution materials are correctly “upscaled” to higher resolutions, and the image remains clear without any artificial edge sharpening or the typical "over-sharpening" found in cheap models. Unfortunately, the digital processing is significantly poorer. In practice, it’s hard to talk about any advanced artifact smoothing or masking of problematic tonal transitions. In heavily compressed films—especially those from YouTube—the TV struggles with reducing compression blocks and unwanted banding, making the material's imperfections clearly visible. The A6Q scales the image well, but when it comes to digital processing, it leaves the user alone with the source quality.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

The fluidity of motion on the Hisense A6Q is... well, quite average. It's a TV with a native refresh rate of 60 Hz in 4K, which means the movement of objects on the screen doesn't always look perfectly smooth. In dynamic scenes in films or sports, it's evident that this is not the strongest point of this model. The situation looks much better with 1080p content when connecting a console or computer, as the A6Q can then operate at up to 120 Hz. That's a big plus, especially for gamers. However, the sharpness of motion still leaves a lot to be desired, with noticeable ghosting, and the response time of the panel shows that it isn't one of the TV's strong suits.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.

For such an inexpensive television, the Hisense A6Q really can surprise with what it offers gamers. It operates in 4K only at 60 Hz, but when the game switches to performance mode and drops to 1080p, the panel can work at even 120 Hz. In this price range, that's a big plus, as most titles on consoles don’t deliver a stable 4K at 120 frames. In practice, we are realistically gaming in 1080p, and here the A6Q provides a very enjoyable gaming experience. Additionally, it has a few features that are usually found in more expensive models: ALLM, VRR, and Dolby Vision Gaming for Xbox Series X/S. Everything is gathered in one place, in a simple and convenient Game Bar, so you don't need to dig through the entire menu. For such an affordable piece of equipment, it's really a solid setup for gamers — maybe not for the most demanding, but definitely spot on for occasional gaming.