Haier Q80FUX vs Hisense E7Q PRO / E79Q PRO

Alright, let's move on to the topic that really sparks discussions, which is the capabilities of the TV in HDR mode. Let's be clear from the start: the Haier Q80FUX is certainly not a brightness demon. The panel of this set can generate about 350 nits at peak, which in today's reality is an absolute minimum to even talk about the presence of HDR expanded dynamic range. On the plus side, this brightness is at least stable – regardless of the test pattern or film scene we used, measurements consistently hovered around 300-350 nits. These are at best adequate results, definitely far from the dazzling display of capabilities that we know from more expensive models. Fortunately, there is one aspect where the Q80FUX makes up for these shortcomings and does so considerably. We are talking about a QLED TV (or more precisely PFS LED), which means that thanks to the quantum dot filter used on the panel, it can generate truly juicy, vibrant colours. These are not empty promises – covering nearly 95% of the DCI-P3 colour gamut is an impressive result and directly translates into very pleasant, saturated colours for the eye.

When it comes to HDR effect quality, the E7Q PRO unfortunately is not a television that impresses with brightness alone. In real film materials, we measured around 250–300 nits, which is simply not enough for HDR to look spectacular. There's a lack of that "spark" in bright details, flashes, and light effects, and in many HDR scenes, it can resemble more of a good SDR than true cinematic HDR. The silver lining in all this is the colours. We managed to confirm that the E7Q PRO is a PFS type television, which means it has an additional filter that improves colour gamut coverage. Because of this, even if the brightness doesn't deliver, the colours in HDR content can be properly saturated and pleasing to the eye, without the impression of a "washed-out" image.

Factory settings for movie mode are seldom perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, due to an excessive amount of red in the white balance, giving the overall picture a slight sepia tone. Conversely, in HDR materials, the television fell into the other extreme – an excess of blue caused an unnatural, cool effect in perception. However, it wasn't the fickle white balance that was the biggest issue with this TV. The real culprit, responsible for the previously described problems, was hiding deeper. It turned out that the Q80FUX has completely miscalibrated gamma values and, crucial for HDR, a poorly executed EOTF curve. It was these erroneous factory settings that caused the notorious clipping of the brightest parts of the image, imposing that characteristic milky filter over them. Thus, we found the source of the problem. This situation led to general, significant colour inaccuracies that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of these adjustments in the next paragraph.

In terms of colour reproduction, we tested the Hisense E7Q Pro in Movie mode, which undoubtedly turned out to be the best built-in preset. It is this mode, unlike the Eco, Standard, or Dynamic settings, that offers the most natural colours straight out of the box. While no factory mode is completely free of flaws, the E7Q Pro deserves high praise for its colour rendition in standard SDR content. The colour palette has been very well tuned, and errors in the Color Checker tests often did not exceed a value of 3, which is an outstanding result rarely seen in such affordable TVs. The only drawback we noted in SDR is the tendency to darken certain elements of the image, as indicated by a slightly raised gamma curve. The TV performs slightly worse with colours in HDR mode. Here, colour errors become noticeable to the naked eye, mainly due to a deficiency of blue in the white balance. This causes the colours on screen to appear too warm, and for some viewers, they may seem almost "too cinematic." Of course, to improve these parameters, we proceeded with professional calibration.

The results of our calibration procedures must, unfortunately, be regarded as twofold. Generally speaking, the picture is undeniably better than before the adjustments; however, the biggest winner of this process has been SDR content. It is precisely here, after correcting the gamma curves and white balance, that we achieved results that can safely be called very good. Once set up, the Q80FUX truly shines in standard dynamic range, displaying only slight errors in the most challenging skin tones. Unfortunately, the weakest link remains HDR content. And here's the paradox: even though we managed to calibrate the white balance to near perfection, the overall colour errors still remain at quite a high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate image clipping effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue, due to this electronic interference, the screen can still veer into somewhat too cool tones. That’s just how this television is.

In the case of materials with standard dynamic range (SDR), our actions in Filmmaker mode turned out to be largely cosmetic 😉. We mainly focused on a subtle adjustment of the white balance and equalising the gamma curve, which allowed us to recover details in the darker areas of the image that previously tended to get lost. However, it's worth noting that the E7Q Pro unit we tested happened to be exceptionally well-made from the factory. We remind you that these parameters depend on the specific unit – with mass production, factory calibration can be random, so your unit may require slightly different adjustments. The biggest beneficiary of professional calibration was undoubtedly HDR mode. This is where we did the most work, which brought spectacular results. We successfully tamed the excessive warmth of the image, caused by a factory shortfall in blue colour. After calibration, colour errors were reduced to a significantly lower level, which will certainly please those watching a lot of streaming content in HDR format, expecting faithful reproduction.

If there's one area where Haier clearly shows it still has a lot to catch up on compared to the market leaders, it's digital image processing. The upscaling, well... it's just okay. And that's really all that can be said about it. It does what it's supposed to do: ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like a forcibly enlarged postage stamp. However, it's far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest issue with the Q80FUX software is the almost complete lack of additional "cleaning" and smoothing features for the image. The receiver offers no noise reduction mechanisms or gradient enhancement. This means that with older or highly compressed materials, we simply have to accept that all the imperfections in tonal transitions or colour blending, which we mentioned earlier, will constantly accompany us during viewing.

When it comes to upscaling and digital image processing, the E7Q PRO deserves praise. The scaling performs really well here and doesn't fall dramatically short of much more expensive, advanced TVs. Lower quality materials can look clear and reasonable, without the impression that the image is artificially "overdrawn." The smoothing function, however, presents a bit worse. Yes, it can be effective and improve tonal transitions in low-quality materials, but at the same time, it can introduce unwanted effects. Sometimes it removes film grain or adds unwanted artifacts, giving the image a more "digital" character. Therefore, we mainly recommend it to those who prefer a smoother, less cinematic image style.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (although, as will soon become clear, really just one) intended to enhance the experience with older film productions. There is a "De-Judder" slider available, which indeed affects motion fluidity and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a true surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to removing blur – this is a feature we typically encounter in 120Hz panels, aimed at combating blurring in sports. As we expected, recalling memories from testing the K85F model, here too this slider is merely a façade. Its adjustment contributes absolutely nothing to the picture and simply seems to be an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In the category of motion blur and fluidity, the E7Q PRO has one very strong argument. At this price, Hisense has added a 120 Hz panel, and in PC mode, it can even operate at 144 Hz. This immediately provides greater possibilities in motion settings, as more options for smoothing the image appear in the menu. Among other things, we have frame interpolation options, allowing us to adjust the fluidity for sports or movies, depending on whether we prefer a more cinematic character or a "theatrical" smoothness.

Entering the realm of gaming, the Haier Q80FUX proves to be quite a good companion for the "casual gamer." It is equipped with some highly sought-after features today such as VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Even though we don't have a 4K@120Hz panel here, the television can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing you to consciously switch the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won't particularly complain about the lack of additions like the "Game Bar," as it's just a nice extra. However, the most concerning issues arise when we enter the world of HDR in gaming. Due to the fact that the television continuously adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is almost impossible to accomplish according to the instructions. Worse still, in Dolby Vision mode for gaming, the input lag increases to around 50 ms, which is a high enough value that essentially makes this mode unusable. Generally speaking, we still wouldn't recommend gaming on this television in HDR mode, so these aren't that serious shortcomings. What’s most pleasing is the presence of 120Hz in Full HD, making the Q80FUX quite a cool television for the occasional gamer.

E7Q PRO is a phenomenal screen for gamers. Besides the typical "issue" with Hisense, which is the lack of support for the HGiG format due to constantly active tone mapping, we get practically everything one could expect from a TV that is supposed to have a gaming tag. There are two HDMI 2.1 ports, along with a full set of key features. We have variable refresh rate, automatic switching to game mode, and support for 4K at 120 Hz. On top of that, all the important settings are at hand in the clear Game Bar. This tool not only looks modern, but it also has a typically "gaming" edge and actually makes life easier while gaming.