Haier M95E vs Blaupunkt UGC5500S

If there is one category where the Haier M95E absolutely shines, it is the HDR effect, powered by the raw power of the backlight. This television cannot be denied its reputation as a truly bright device. In both most film scenes and during our synthetic measurements, the panel easily reached, and often exceeded, the threshold of 1200-1500 nits. This directly translates to the viewing experience – the image has punch and truly allows one to feel the magic of materials recorded in this format. However, one must be aware of a certain compromise. When particularly demanding shots filled with small but intense bright points appear on the screen, the M95E, while not losing its resonance and not dimming, pays a different price for it. A very strong and noticeably distracting halo effect is generated around these bright elements. It is evident that the algorithms controlling dimming have been programmed to prioritise brightness and the visibility of the smallest details, even if this comes at the cost of perfect black levels. We are not entirely convinced that this is the healthiest approach; nonetheless, it must be admitted that the general capabilities of the M95E in this regard are indeed substantial. A huge positive is that we are dealing with a Mini LED QLED construction. The use of a quantum dot layer brings measurable benefits in the form of wide coverage of the colour palette, which in our tests reached nearly 96% of the DCI-P3 space. This guarantees that the television has full predispositions for displaying vibrant and appropriately saturated colours.

We won’t beat around the bush here – if you’re looking for a TV strictly for cinematic HDR experiences, then you’ve come to the wrong place. Unfortunately, the Blaupunkt UGC5500S is not a machine built for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on movie screens speaks for itself. It’s simply too little to even consider any real HDR effect. To be honest, everything displayed in this format can confidently be seen as a somewhat “enhanced” SDR mode. We expected this, as practically every device in this price range falls short in this area, but we feel it’s our duty to warn you. Manufacturers love to brag about HDR compatibility on the boxes, but in reality, this format simply doesn’t exist here – it lacks the “fuel” in the form of brightness.

The situation is further complicated for Blaupunkt, as we’re dealing with a panel that has very basic coverage of the DCI-P3 colour gamut, reaching only about 80%. You won’t find any advanced coatings to expand these capabilities (like quantum dots), which means scenes that are supposed to burst with richly saturated colours appear simply underwhelming on this screen. Therefore, we have a particular piece of advice for you: don’t force HDR mode on this model. If you have the option in the streaming app settings – just turn it off. By sticking to the classic SDR mode, you’ll be sure that the TV won’t try to “enhance” something that it can’t handle hardware-wise.

Each TV is evaluated primarily based on its default cinematic mode – in this case, "Movie" – which theoretically should be the "best" and most accurate straight out of the box. Unfortunately, with the Haier M95E, the word "best" is absolutely not synonymous with the word "good." Even during SDR viewing, the picture revealed evident issues: white balance skewed too far towards red, and excessive, unnatural colour saturation led to noticeable colour deviations. Worse still, the M95E also struggles with brightness management (gamma curve), excessively darkening the entire scene. Such behaviour is hard to commend, as it directly leads to the merging of details in shadows, which irretrievably disappear into a black void.

However, the real disaster arrived when switching to HDR content, still remaining in "Movie" mode. It's hard to guess who came up with such a fantastic idea – or perhaps it was simply a complete oversight by Haier's engineers during this stage – but instead of cinematic accuracy, the image started to resemble a vivid "Dynamic" mode. The white balance exposed significant issues with blue color, which in turn resulted in unnatural sharpness and artificial over-brightening of the entire scene. As if that wasn't enough, the EOTF curve's characteristics mercilessly revealed that the TV also had fundamental issues with managing the local dimming system in this setting. We haven’t calibrated many Haier TVs in our career, but we know for sure already that the M95E definitely needs it.

We also took a close look at how Blaupunkt handles colours in movie mode, and here the matter is, to put it simply, twofold. We must once again clearly separate what we see in the standard SDR format from what happens when HDR is switched on, as they are two completely different worlds. Let's start with the better side of the coin. If you're planning to watch traditional TV, YouTube, or older films on this television, you can count on really well-tuned colours. In our test sample, the white balance in movie mode performed exceptionally well, which honestly surprised us. Of course, to avoid being too rosy, we noticed some drawbacks. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest areas. Additionally, there is quite a strong, at times overly aggressive, red saturation, which resulted in visible errors in reproducing certain shades. Despite this, overall, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst rendition. The excess blue in the white balance is so significant that it’s glaring, ruining any realism in the scene. Furthermore, the television interprets brightness very loosely, which, upon analysing the EOTF curve, clearly showed that for most of the time, colours simply appear washed out and lacking depth. This is also perfectly evident in the colour errors that become apparent in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which seems to be forcefully added without proper refinement.

The calibration process left us with extremely mixed feelings. On one hand, we noted considerable success in the area of colour. By using the options available in the menu, we managed to tame the white balance and bring it down to an acceptable level. As a result, SDR content finally freed itself from the irritating red dominance, and the HDR image stopped resembling the vivid, retail demonstration mode. The entire colour palette and its saturation were also clearly corrected – maybe not perfectly, but to the extent that the software allowed, and the difference was visible to the naked eye.

And on this, unfortunately, our list of corrections pretty much ends, as M95E simply didn't allow for any more. As we signalled earlier, most settings related to the brightness of the image do not respond to our commands at all. This means that we were not able to control its fundamental characteristics in any way – neither the gamma curve nor the EOTF. In practice, the television still tends to darken details in SDR content, which was confirmed by the inflated gamma, merging details in the shadows. Meanwhile, the EOTF curve in HDR mode still mercilessly exposed all those previously mentioned problems with chaotic local dimming management. And although the calibration process itself achieved a lot, removing most of the colour issues, in the end, we had to capitulate.

It may sound like a joke – pulling out professional measuring equipment for a TV that costs around a thousand złoty / 250 dollars, but we wouldn’t be ourselves if we didn’t check it. The question is: does such cheap gear give us any leeway in terms of calibration? To your surprise, the answer is: yes, absolutely. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to effectively work on the picture. These aren't just empty sliders; these are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were visible to the naked eye. We successfully eliminated the problem we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the issue with the incorrect dimming of the brightest parts of the image. After calibration, the picture in standard format became significantly more balanced and simply correct. When it comes to HDR, the situation was more complicated again. While we managed to “tame” that aggressive blue tint in the white balance, it was clear that we were fighting a bit of a losing battle. Even after changing the settings, the TV still tried to interfere with the picture in its own way, as if the electronics knew better than we did how the scene should look. To top it off, there's the hardware barrier that no slider can overcome – colours in HDR still remain undersaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vivid colours. To summarise this point: if any of you ask whether it’s possible to calibrate a TV for “a grand”, we respond with complete conviction: it is possible.

No worries, but what happens to those colour transitions when lower quality material with compression artifacts comes on screen? Unfortunately, we have some bad news for you. Even though in the menu we can find an option responsible for smoothing tonal transitions in older content, we definitely DO NOT RECOMMEND using it. Its activation causes an avalanche of additional, nasty artifacts, noticeably blurring the entire image, and ironically – it often doesn’t even remove those unwanted “jaggies” it was meant to tackle. This feature might as well not exist at all.

We can write many more warm words about the overall upscaling, which is the process of raising lower resolutions to the native 4K matrix. The image after upscaling looks really decent – it’s neither overly jagged nor artificially smoothed. In this particular area, the M95E really does the job.

If you're hoping that the processor in this model will magically "fix" the poor quality signal from your cable TV or old movies from YouTube, we must disappoint you. The capabilities of this television end at absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no mention of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions to reduce unwanted tonal transitions. If the material being viewed shows what is known as banding (ugly "steps" instead of a smooth transition of colours, e.g., in the sky), this television will display them in all their glory. Additionally, the television has a tendency to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly zooms in on the frame, causing us to lose details that are at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal, with all its flaws.

In terms of motion fluidity and blurring, our feelings are quite mixed because the M95E is a paradox television. Let's start with absolute admiration: the heart of the device is its 144Hz panel, but what really impresses is its performance with 120Hz content, which is crucial for sports and console gaming. We must state with complete certainty that Haier has equipped it with one of the best VA panels currently available on the market when it comes to minimising blurring. It is rare to encounter an LCD panel that offers such clear, sharp, and ghosting-free motion. In this regard, the M95E is simply phenomenal.

And that is why the unpleasant surprise waiting for us on the software side is so painful. It turns out that this fantastic hardware potential is completely underutilised because the TV virtually offers no functioning options for improving fluidity. The smoothing systems that should help with lower frame rate content can indeed be found in the menu, but they essentially do not respond to our settings. The conclusion is brutally simple: if you intend to watch high fluidity materials, you must be sure that the source is broadcasting them in native 120. In every other case, you will have to come to terms with a rather harsh, stuttering image, as the M95E will not help smooth it out in any way.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image in fast action scenes or during a match. However, the biggest drawback of this model is that you won’t find any digital motion smoothers in the menu. The manufacturer hasn’t given us any room for manoeuvre – nothing can be smoothed out or the image adjusted to our personal preferences. The picture is always "raw" and we receive it exactly as it is transmitted by the source. For fans of cinematic "jumping" images, this might be good, but the rest simply has to get used to the lack of any motion enhancement.

When it comes to features for gamers, the Haier M95E offers some strong arguments. First and foremost, it is fully prepared for the new generation of consoles and powerful gaming PCs. It comes equipped with two full-fledged HDMI 2.1 ports, which effortlessly handle 4K signals at 120Hz and even allow gaming at 144Hz. This is the foundation that guarantees us full utilisation of our available hardware. Furthermore, the key technologies work flawlessly here. The TV accurately detects the console and automatically switches to low-latency mode (ALLM), so we don’t have to fiddle with the settings. The frame syncing (VRR) also works efficiently, eliminating annoying tearing when the game’s smoothness slightly drops. Considering the exceptionally low motion blur of the panel, which we've already mentioned, the M95E creates a truly comfortable and responsive gaming environment. Of course, it's not a perfect package. A dedicated "Game Bar", which is a handy menu for gamers, would be useful, but that's really just a nice extra. A more serious omission is the lack of support for the HGiG standard, which impedes the perfect HDR configuration on consoles and can lead to overexposure. Despite these shortcomings, the core "gaming package" that the M95E offers is really solid and fully functional.

When it comes to gaming on the Blaupunkt, we weren’t expecting miracles and indeed – the list of features isn’t very long. However, there are two interesting points worth mentioning, as they might be significant for some of you at this price. The first advantage is that the TV quite smoothly detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device knows when you start gaming and automatically switches to low latency mode. This is convenient because you don’t have to fiddle with settings every time to ensure input lag doesn’t spoil the fun. The second point is a real curiosity that surprised us. Despite it being a 60 Hz panel, the Blaupunkt can display a 120 Hz image at Full HD resolution. Sure, we lose 4K details, but for those playing more dynamic, online shooters where smoothness is more important than resolution, this is a really nice and unexpected addition in such an affordable device. Other than these two points, you won’t find anything more here. There are no advanced smoothness enhancement systems for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.