XIAOMI A PRO 2026 vs Samsung S85H

If you are hoping for a cinematic HDR effect in the new Xiaomi A Pro 2026, you better quickly cool your expectations. This TV is simply too dark to fully convey the capabilities of contemporary movies or series prepared for the highest quality picture. Our measurements showed brightness in the range of 200-300 nits, which are values that suit SDR content more than ambitious HDR productions. In practice, this means that most movies look okay, but they definitely won’t give you the "wow" effect that other TVs deliver. Fortunately, not everything is lost – a plus here is the use of the PFS LED filter, which is a solution similar to the quantum dot known from QLEDs. Thanks to this, the coverage of the DCI-P3 color gamut reaches about 94%, resulting in vibrant, saturated colors in the vast majority of materials.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 series. In the same movie scenes the previous year's model stayed closer to about 700 nits, while the S85H can reach around 800 nits. Of course this isn't a change that completely transforms the HDR experience, but that extra headroom is noticeable especially with small highlights, reflections, and stronger special effects. Around 800 nits is already a very good result for an entry-level OLED and in most films it's enough for HDR to have the right impact. Bright elements can clearly stand out from perfect black, and that contrast still does most of the heavy lifting here. You should remember the typical limitation of organic technology, though. When a very bright scene covers a large part of the screen, brightness can drop by almost half. This is the result of the panel's protection mechanisms, which limit its power with large bright areas.

Colors

The S85H can produce very pleasant, saturated colors and in most HDR films it looks really good in that respect. We measured roughly 95% DCI-P3 coverage, so the palette most often used in movies is reproduced to a very large degree. Skin tones, greens, and stronger reds still have appropriate intensity, and during normal viewing it's hard to fault them. Only when you look more broadly at BT.2020 do the limitations of the new WOLED SE panel become apparent. Coverage was around 70%, a bit less than in previous-generation WOLEDs and noticeably less than in QD-OLED panels. In films this isn't a major loss, because most productions rarely use such highly saturated colors. You notice it more often in games, where developers are much more likely to employ more intense colors.

What we saw in Filmmaker mode surprised us greatly – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a display in a store window. The white balance was shifted towards blue, leading to huge color errors and the effect of washed-out scenes in SDR content. It was a little better, though far from perfect, in HDR materials. There, problems were also visible – color saturation and the entire palette consistently shifted towards cooler tones, which made the image appear more artificial and cold rather than cinematic. In other words: even in Filmmaker mode, which should be the showcase of this television, we got a result far from expectations.

To evaluate color we, of course, selected Filmmaker mode, and in SDR our S85H unit was very well calibrated out of the box. The biggest deviation appears in the white balance, where a bit of blue drops out as brightness increases. In practice this means whites and grays have a slightly warmer tint than they should. It's not a major error and during normal viewing it generally isn't very noticeable. Gamma also stays close to the reference value, so the image is neither overly bright nor unnecessarily dim. The S85H's SDR picture quality is therefore very good straight out of the box. A few more imperfections show up in HDR. Here the white balance shifts more as brightness increases, with blue becoming dominant and the red component noticeably lacking. That also leads to larger errors in some colors. These aren't yet distortions that completely change the character of the image, but compared directly with the reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

Even though Xiaomi is not a brand associated with top-of-the-line televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left quite a few calibration settings. After a few adjustments, the SDR picture gained a completely new character. The colors stopped veering into blue tones, the whites became more natural, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR material. Here, it was immediately noticeable what we had already mentioned - the overexposure of bright scenes and issues with balance control. Calibration only helped partially because the limitations of the panel itself played a role. However, it should be emphasized that in the case of SDR, the television transformed beyond recognition, and in a decidedly positive direction.

Calibration yields very good results on the S85H. First, the white balance can be set almost perfectly, which removes the slightly too-warm image cast that was visible earlier in SDR. Color reproduction itself also improves significantly; most errors drop to a very low level, and in everyday viewing it's hard to notice any visible inaccuracies. You can also improve a lot in HDR, although some issues remain due to the TV's inherent characteristics. The S85H doesn't always perfectly follow the brightness curve. The darkest areas are slightly boosted, and as you approach the panel's limits you can see small deviations in the brightest highlights. On top of that there's limited coverage of the wider BT.2020 gamut, which no calibration can of course overcome. Despite this, the end result is very good, and after calibration the S85H can deliver a well-tuned, natural image.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the TV wasn’t designed to achieve record brightness levels, the manufacturer would have opted for a more robust processor and a set of features that would "enhance" lower quality images. Unfortunately – we were also quite disappointed here. On the plus side, there is reasonably decent upscaling that handles HD materials and elevates them to 4K in an acceptable manner. However, this is where the list of advantages ends. The TV does not offer any features to improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, this lack of support makes lower quality materials look simply bland. An additional problem is the phenomenon of overscan. When watching older materials, it sometimes happens that part of the image is cut off, which only intensifies the impression that Xiaomi still has a lot to catch up on in this category.

For the S85H, Samsung used the same proprietary NQ4 Gen2 AI processor as in last year’s S85F, and in terms of digital image processing it performs quite well. Upscaling is one of this model’s strengths. Lower-resolution content is well sharpened, edges look natural, and the image doesn’t feel overly artificial. Just bear in mind a common Samsung quirk: at very low resolutions you can’t completely disable overscan, so the TV may slightly crop the left edge of the image. The "noise reduction" function, which smooths weaker tonal transitions, also works very well. The processor can effectively remove posterization and other imperfections visible in lower-quality material. However, you need to be careful with the strength of this feature, because Samsung can be fairly aggressive here. When it’s enabled, along with unwanted artifacts, fine image details such as the texture of skin or clothing can start to disappear.

The motion fluidity in the Xiaomi A Pro 2026 is an interesting compromise that results from the hybrid matrix used here. At the native resolution of 4K, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch movies and series. It is precisely for them that the manufacturer added a motion smoother, allowing users to adjust the image to their own preferences – one can opt for greater fluidity or leave the more "cinematic" frames depending on the settings.

The S85H uses an OLED panel, so it performs excellently when it comes to motion blur. Pixels respond virtually instantly, so moving objects don’t leave the characteristic ghosting seen on some LCD TVs. This is especially noticeable with sports or fast-paced games, where the image stays very clean even during rapid motion. The panel runs at 120 Hz. That’s more than enough for movies, TV series, sports, or console gaming. It’s a bit of a shame Samsung didn’t include a higher refresh rate aimed at PC gamers, since more and more TVs now offer 144 or even 165 Hz at 4K. However, that doesn’t affect motion perception in films or sports. There’s also the classic motion smoothing feature with two settings, blur reduction and judder reduction. So you can choose whether films should keep their cinematic 24 frames per second or if you prefer to smooth them a bit. The S85H gives you plenty of flexibility here, and the interpolation works well and, with reasonable settings, doesn’t produce too many artifacts.

Indeed – since Xiaomi has added the "Game Boost 120 Hz" feature here, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens that enthusiasm. Aside from this mode (which, it must be said, is a great addition in a budget build), we have just a rather bizarre player panel. It's hard to call it a fully-fledged "game bar" – it's more of a simple overlay on the TV Menu with limited options. And that would be about it. There is no ALLM, so the TV won't automatically switch to game mode. There is no VRR, so you can forget about smooth frame synchronization. We also won't find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: apart from Game Boost 120 Hz, which does indeed make playing more enjoyable in 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing particularly appealing to gamers.

The Samsung S85H is very well set up for gaming, whether you connect a console or a PC. The manufacturer didn’t skimp on ports and all four HDMI inputs support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR, and ALLM without worrying which input to plug your console into. With several devices that matters, because you don’t have to choose between a console, a PC, or a soundbar connected via eARC. The feature set itself is very comprehensive. The S85H supports VRR, FreeSync, and automatic switching to game mode, and Samsung offers its comprehensive Game Bar, which lets you quickly view key signal parameters and change settings without leaving the game. The only real omission is Dolby Vision, which will matter mainly to Xbox owners. That’s a typical trait of Samsung TVs. Game Motion Plus performs very well and is one of the features that have set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as large an increase in input lag as traditional motion smoothing. In practice, with more relaxed games, racing titles, or action games this can really improve perceived motion, especially if you’re sensitive to low framerates.