XIAOMI A PRO 2026 vs Samsung Q6F (IPS)

If you are hoping for a cinematic HDR effect in the new Xiaomi A Pro 2026, you better quickly cool your expectations. This TV is simply too dark to fully convey the capabilities of contemporary movies or series prepared for the highest quality picture. Our measurements showed brightness in the range of 200-300 nits, which are values that suit SDR content more than ambitious HDR productions. In practice, this means that most movies look okay, but they definitely won’t give you the "wow" effect that other TVs deliver. Fortunately, not everything is lost – a plus here is the use of the PFS LED filter, which is a solution similar to the quantum dot known from QLEDs. Thanks to this, the coverage of the DCI-P3 color gamut reaches about 94%, resulting in vibrant, saturated colors in the vast majority of materials.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

What we saw in Filmmaker mode surprised us greatly – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a display in a store window. The white balance was shifted towards blue, leading to huge color errors and the effect of washed-out scenes in SDR content. It was a little better, though far from perfect, in HDR materials. There, problems were also visible – color saturation and the entire palette consistently shifted towards cooler tones, which made the image appear more artificial and cold rather than cinematic. In other words: even in Filmmaker mode, which should be the showcase of this television, we got a result far from expectations.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

Even though Xiaomi is not a brand associated with top-of-the-line televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left quite a few calibration settings. After a few adjustments, the SDR picture gained a completely new character. The colors stopped veering into blue tones, the whites became more natural, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR material. Here, it was immediately noticeable what we had already mentioned - the overexposure of bright scenes and issues with balance control. Calibration only helped partially because the limitations of the panel itself played a role. However, it should be emphasized that in the case of SDR, the television transformed beyond recognition, and in a decidedly positive direction.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the TV wasn’t designed to achieve record brightness levels, the manufacturer would have opted for a more robust processor and a set of features that would "enhance" lower quality images. Unfortunately – we were also quite disappointed here. On the plus side, there is reasonably decent upscaling that handles HD materials and elevates them to 4K in an acceptable manner. However, this is where the list of advantages ends. The TV does not offer any features to improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, this lack of support makes lower quality materials look simply bland. An additional problem is the phenomenon of overscan. When watching older materials, it sometimes happens that part of the image is cut off, which only intensifies the impression that Xiaomi still has a lot to catch up on in this category.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The motion fluidity in the Xiaomi A Pro 2026 is an interesting compromise that results from the hybrid matrix used here. At the native resolution of 4K, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch movies and series. It is precisely for them that the manufacturer added a motion smoother, allowing users to adjust the image to their own preferences – one can opt for greater fluidity or leave the more "cinematic" frames depending on the settings.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

Indeed – since Xiaomi has added the "Game Boost 120 Hz" feature here, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens that enthusiasm. Aside from this mode (which, it must be said, is a great addition in a budget build), we have just a rather bizarre player panel. It's hard to call it a fully-fledged "game bar" – it's more of a simple overlay on the TV Menu with limited options. And that would be about it. There is no ALLM, so the TV won't automatically switch to game mode. There is no VRR, so you can forget about smooth frame synchronization. We also won't find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: apart from Game Boost 120 Hz, which does indeed make playing more enjoyable in 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing particularly appealing to gamers.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.