TCL X11L vs LG MRGB85B

Such a large number of zones translated not only into deep, inky blacks but also into the panel’s brightness. The X11L is an extremely bright TV. Peak brightness can easily exceed 4000 nits, and with the special "Boost" mode enabled, under specific conditions that brightness can even hover around the marketing figures of 9000–10,000 nits. This is undoubtedly one of the brightest, if not the brightest, screens on the market. But how do those numbers translate to real-world movie measurements? The results are very good, though of course far from the marketing promises. Our measured brightness in actual movie scenes hovered around 2000–3000 nits. That’s an outstanding result, considering that the vast majority of content is produced to those brightness levels, including the rarer material mastered to 4000 nits. But it also shows that the numbers the manufacturer brags about don’t always translate directly to the video content available at home. The only "quirk" (if you can call it that) is that when very small, bright elements appear on the screen, their brightness drops below 2000 nits. The dimming algorithm does this deliberately to preserve deep blacks and minimize halo. This is entirely understandable and the effect remains very strong, but it also demonstrates that even with such powerful hardware, Mini-LED technology has its limits and does not always work without compromise. In HDR, brightness isn’t the only thing that matters; color saturation and color accuracy do as well. On the X11L these are very good thanks to the new Super QLED quantum dots (SQD). The addition of a newly applied filter delivered excellent coverage of the P3 color gamut and the ultra-wide BT.2020. Although it doesn’t reach the advertised 100% of BT.2020, values around 89–90% can be called excellent. Colors are not far off those of RGB Mini-LED panels. We can even say they’re more stable because they use a less demanding algorithm than the one RGB screens often have to deal with.

LG MRGB85 offers moderate brightness. On test patterns it reaches about 700 nits, which by itself is a decent result. In actual movie scenes the values are lower and most often fall between 400 and 600 nits. Bright, expansive shots perform best. In scenes with a lot of black the TV noticeably limits luminance, trying to maintain the highest possible contrast. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Especially in darker parts of films the limitations of edge-lit backlighting and imprecise local dimming become noticeable again.

HDR Colors

A much stronger suit of the MRGB85 is its colors. The TV covers about 95% of the DCI-P3 color space and 74% of BT.2020, allowing HDR material to look vivid and striking. Colors are well saturated, and the difference compared with basic LCD TVs is clearly visible. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colors is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and yields more saturated red shades. This solution works well for color reproduction, but it does not change the limitations of dimming itself. The LEDs are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

When you enable the supposedly best Filmmaker Mode, you expect a one-to-one image of what the director saw. On the X11L it's pretty good, but the mode has obvious flaws that our measurements immediately exposed. Let's start with SDR. Both the white balance and the gamma are simply misaligned here. The whites have too much blue and red, giving a faint pink tint. That also hurt the gamma, which instead of holding the cinematic 2.4 runs closer to 2.2. What did that result in? The whole image ends up pushed and artificially brightened. The worst is saved for last: the HDR measurements. Apart from that slight white balance drift, the X11L fails on the brightness management curve called the EOTF. What we saw in the measurements instantly explains what we noticed earlier in the films. The image is unnaturally bright because the curve is massively overshot above the reference. The TV simply and ruthlessly lifts the dark parts of the image to create a "wow" effect, completely ignoring the director's intent.

We tested the TV in Filmmaker Mode, because among the available settings it produced the image closest to the reference. Factory color reproduction was not perfect. The biggest deviations were in the white balance, with too much red and not enough blue, which pushed the picture noticeably toward warmer tones. Whites took on a slightly yellowish cast, and skin tones and bright areas did not always look natural. It wasn’t a flaw that completely ruined the viewing experience, but in a direct comparison with the same screen after calibration the difference was clearly visible.

After a professional calibration we were above all able to fully tame the SDR signal. The X11L responded perfectly to our adjustments. We were able to completely straighten the white balance, eliminate that pink tint, and set gamma to a stable 2.4. After that treatment the picture finally became consistent with the director’s intent, natural and free of artificial boosts. For HDR we also managed to make minor corrections, but the TV’s biggest flaw remained unchanged. I’m talking, of course, about how the X11L manages its brightness and how badly it overshoots the EOTF curve. Unfortunately, TCL provides virtually no tools to manipulate this parameter. Even during professional calibration the software offers no way to tame that curve, so the TV will always tend to brighten the image in HDR.

Calibration primarily corrected the white balance and removed the previously visible warm tint. After the adjustment, whites no longer had a yellow cast and colors became more neutral and natural. The biggest improvement was seen in SDR content, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the picture became more controlled, although not all of the TV's limitations could be eliminated. The biggest issue remained the intense reds, which were not always reproduced with the necessary precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations remain clearly visible.

Like in the C8L model we tested earlier, TCL has delivered a substantial upgrade in its flagship X series in this area. It's all thanks to the MediaTek Pentonic 800 processor used in this model. Thanks to it, features that smooth tonal transitions or even upscale content to higher resolutions finally look the way they should. The biggest Achilles' heel of previous TCL models has finally been addressed. The processor excels at digital processing, and in this respect the TV no longer lags behind flagship models from Korea or even the most refined ones from Japan.

Upscaling and digital image processing perform quite well on the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution content, and you can easily disable overscan regardless of the source. The TV also handles compression artifacts fairly well. The "Smooth Gradation" feature can effectively reduce visible banding and tonal unevenness, but it doesn't always work precisely. At higher settings it can smooth over fine details, for example material textures. On the plus side, it doesn't remove film grain. It's safest to use the "Low" or "Medium" setting, which provides the best compromise between artifact reduction and detail retention.

In terms of specs, the X11L can impress: it supports refresh rates up to 144 Hz at 4K, and at Full HD it can be pushed to 288 Hz. But from a real-world perspective, we were most interested in how the screen handles 120 Hz. After all, modern hardware is limited to that rate, led by current-generation consoles. How does it perform in practice? Although it uses a VA panel, the screen doesn't exhibit heavy ghosting. With very fast-moving objects you can notice a slight smear, but it's subtle enough that it doesn't stand out when gaming or watching sports. The motion smoothing feature called "Motion Clarity" is also very helpful; it lets you adjust motion smoothness to your liking. Recommended settings are shown in the photo.

The LG MRGB85 is equipped with a VA panel with a native 144 Hz refresh rate, so it performs very well in terms of motion smoothness. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sports, where camera movement is noticeably smoother than on basic 60 Hz models. There's also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for sports broadcasts and TV shows. The range of adjustment is wide, so you can easily tailor the motion smoothing to your preferences.

For gamers the X11L is simply a superb screen. TCL has already gotten us used to the fact that its products deliver practically every feature available on the market, and it's exactly the same with the flagship from the X series. Thanks to the new processor, the X11L offers four HDMI 2.1 ports with the full 48 Gbps bandwidth. Naturally, the 2.1 standard brings a set of extremely useful options, such as Auto Low Latency Mode (ALLM) and VRR frame synchronization, working across the full refresh range up to 288 Hz. All of these features can be conveniently controlled from a dedicated Game Bar. Interestingly, its appearance can be customized to your taste, with three ready-made themes referencing Nintendo, PlayStation, and Xbox consoles. And speaking of Xbox: Dolby Vision Gaming also works on the X11L without any problems.

When gaming in the standard HDR10 format, however, you should be aware of the specific tuning of the brightness curve, which can cause problems during initial setup. Although the TV supports HGiG, configuring everything through the PlayStation or Xbox system menus can be tricky. The screen's algorithms tend to artificially brighten the test checkerboard pattern, making it really hard to hit the correct white clipping point by eye. For HDR10 content to look right, we recommend manually setting the brightness in the console menu to around 2500–3000 nits.

When it comes to gaming, the LG MRGB85 performs best by far. The manufacturer didn’t skimp on the feature set and essentially brought the full suite of functions from higher-end TVs to this model. You get three HDMI 2.1 ports with full 48 Gbps bandwidth. Each of them supports 4K 120 Hz from consoles, and when connected to a PC also 4K 144 Hz. So you don’t have to worry about which port to plug your console or PC into, since they all offer the same capabilities.

It also includes VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM, and HGiG. Dolby Vision Gaming is present as well, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it out is Game Optimizer, a handy in-game menu for gamers. Without leaving the game you can change the picture profile, brighten shadow details, or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as much more expensive LG models.