TCL RM7L vs LG MRGB85B

The TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That's clearly less than the C7L, which can approach 2600 nits, but in real movie scenes the difference between the two models isn't that big. In less demanding shots with many bright elements on screen, the RM7L can hold around 1000 nits, and sometimes a bit more, approaching 1500 nits. It performs worse in dark scenes with small highlights; then their brightness can fall to around 500 nits. However, this behavior is not accidental. The TV intentionally dims small elements to better control the backlight and maintain higher contrast. This comes at the cost of their intensity, but it's typical behavior for local-dimming TVs in a similar price bracket.

Color gamut coverage

In HDR it's not only brightness that matters, but also color. And here the RM7L has a lot to show. Colors are strongly saturated, and a wide color gamut is one of its bigger strengths. In measurements it reached about 96% of DCI-P3 and around 83% of BT.2020. It's worth remembering, though, that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colors look best, while in movies their saturation can be a bit lower than on SQD Mini LED or QD-OLED TVs. The backlight construction itself is also interesting. The RM7L doesn't use the classic red, green and blue diode set. TCL used two green diodes and one blue, and obtains the red color using a PFS phosphor. You can see this in spectrometer measurements, but it doesn't have a major impact on the picture. Colors are still produced correctly.

LG MRGB85 offers moderate brightness. On test patterns it reaches about 700 nits, which by itself is a decent result. In actual movie scenes the values are lower and most often fall between 400 and 600 nits. Bright, expansive shots perform best. In scenes with a lot of black the TV noticeably limits luminance, trying to maintain the highest possible contrast. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Especially in darker parts of films the limitations of edge-lit backlighting and imprecise local dimming become noticeable again.

HDR Colors

A much stronger suit of the MRGB85 is its colors. The TV covers about 95% of the DCI-P3 color space and 74% of BT.2020, allowing HDR material to look vivid and striking. Colors are well saturated, and the difference compared with basic LCD TVs is clearly visible. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colors is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and yields more saturated red shades. This solution works well for color reproduction, but it does not change the limitations of dimming itself. The LEDs are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

We checked the factory colors in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its purpose is to present the image as faithfully as possible in line with the creators' intent. On the RM7L this was indeed the best-calibrated mode, although it wasn't without flaws. The biggest issue was the white balance. An excess of red and blue caused the picture to take on slightly pinkish tones. This was visible in both SDR and HDR. Additionally, the luminance response was slightly boosted, which made the image appear a bit brighter but also less contrasty than it should have been.

We tested the TV in Filmmaker Mode, because among the available settings it produced the image closest to the reference. Factory color reproduction was not perfect. The biggest deviations were in the white balance, with too much red and not enough blue, which pushed the picture noticeably toward warmer tones. Whites took on a slightly yellowish cast, and skin tones and bright areas did not always look natural. It wasn’t a flaw that completely ruined the viewing experience, but in a direct comparison with the same screen after calibration the difference was clearly visible.

Thanks to a fairly extensive calibration menu, we were able to correct the vast majority of the errors described earlier. The biggest change was to the white balance. After calibration it looks very good, so the image lost its pinkish cast and became much more neutral. The luminance response itself also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The image is no longer unnecessarily brightened, and darker areas look more natural and have more depth. Better luminance accuracy also affected the colors, which after calibration are noticeably more accurate. Not everything could be set perfectly, though. In HDR material the RM7L still interprets part of the signal its own way and does not always follow the reference curve exactly. This is most apparent in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That was the source of the earlier impression of a slightly brightened, less contrasty image. Even so, the calibration delivers a very good result here. It removes the most visible errors and, above all, makes the image much closer to how it should look.

Calibration primarily corrected the white balance and removed the previously visible warm tint. After the adjustment, whites no longer had a yellow cast and colors became more neutral and natural. The biggest improvement was seen in SDR content, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the picture became more controlled, although not all of the TV's limitations could be eliminated. The biggest issue remained the intense reds, which were not always reproduced with the necessary precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations remain clearly visible.

Upscaling and digital image processing are not the RM7L's strong suit. TCL used a MediaTek Pentonic 700 SoC here, designated MT5896, which isn't among the best processors at handling lower-quality content. The biggest problems show up with heavily compressed material from YouTube or regular broadcast TV. The processor can't effectively hide posterization and the characteristic color banding. The feature meant to smooth them does little here, and it often interferes too much with the picture, smoothing faces or fine textures, for example. For that reason, it's best to simply leave it off.

Straightforward upscaling to 4K looks better. Lower-quality sources remain reasonably sharp and retain enough detail. It's not on par with the best processors on the market, but for everyday viewing the result is entirely acceptable.

Upscaling and digital image processing perform quite well on the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution content, and you can easily disable overscan regardless of the source. The TV also handles compression artifacts fairly well. The "Smooth Gradation" feature can effectively reduce visible banding and tonal unevenness, but it doesn't always work precisely. At higher settings it can smooth over fine details, for example material textures. On the plus side, it doesn't remove film grain. It's safest to use the "Low" or "Medium" setting, which provides the best compromise between artifact reduction and detail retention.

The RM7L uses a 144 Hz VA panel, so right out of the box it's a TV well suited for sports, gaming, and other fast-moving content. The high refresh rate also gives the motion interpolation engine more room to work, allowing it to generate extra frames. On the RM7L it works well, and with the right settings it can noticeably improve motion smoothness without causing an excessive soap opera effect.

The LG MRGB85 is equipped with a VA panel with a native 144 Hz refresh rate, so it performs very well in terms of motion smoothness. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sports, where camera movement is noticeably smoother than on basic 60 Hz models. There's also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for sports broadcasts and TV shows. The range of adjustment is wide, so you can easily tailor the motion smoothing to your preferences.

You can say almost nothing but good things about the RM7L when it comes to gamer features. The TV supports ALLM, VRR, Dolby Vision Gaming and works correctly with HGiG, so it’s hard to point out any major omissions in that area. In practice this means automatic switching to low-latency mode, a smoother picture with variable frame rates, and accurate brightness reproduction in HDR games. There’s also a handy Game Bar. From it you can quickly check the frame rate, VRR status, signal format, and aspect ratio, and change key settings without leaving the game. TCL also added a few extra options, like a crosshair and brightening of dark parts of the image, which can be useful in some titles. The biggest downside comes from the use of the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. With a single console this won’t matter much, but when connecting two consoles and a PC you may run out of space. Especially since one of those ports may also be needed for eARC and a soundbar.

When it comes to gaming, the LG MRGB85 performs best by far. The manufacturer didn’t skimp on the feature set and essentially brought the full suite of functions from higher-end TVs to this model. You get three HDMI 2.1 ports with full 48 Gbps bandwidth. Each of them supports 4K 120 Hz from consoles, and when connected to a PC also 4K 144 Hz. So you don’t have to worry about which port to plug your console or PC into, since they all offer the same capabilities.

It also includes VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM, and HGiG. Dolby Vision Gaming is present as well, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it out is Game Optimizer, a handy in-game menu for gamers. Without leaving the game you can change the picture profile, brighten shadow details, or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as much more expensive LG models.