TCL P7K / P79K vs Samsung Q6F (IPS)

When evaluating the HDR effect, we must make it clear and without marketing embellishment: the P7K/P79K is not and was never meant to be a master in this field. The maximum peak brightness that this panel can generate is only around 300 nits. This is a borderline value, a sort of thin red line between what can be considered a barely satisfactory HDR signal and what is really not much different from standard dynamic range (SDR), unfortunately leaning towards the latter. Synthetic tests found brutal confirmation in reality – our measurements taken during movie screenings showed that luminance in key bright parts of the content rarely exceeded the threshold of 200-250 nits. Therefore, this is not a television that would allow content produced in a wide tonal range to truly shine, and we must openly acknowledge that.

Unfortunately, the issue of color reproduction is presented equally restrained. Although the manufacturer positions this model in the "QLED" family, thanks to the use of a PFS LED filter, the results do not match the heightened expectations. The coverage of the wide DCI-P3 color gamut is only 86%. Compared to the market, this is at best an average result, as most devices that employ additional layers to expand the color spectrum easily achieve values at a minimum level of 90-92%.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

Every reliable image quality assessment must begin by selecting the most optimal factory mode. In the case of the tested model P7K/P79K, the choice was confidently made for the "Film" mode. It is this mode that presents an image closest to the creators' intentions, avoiding both the exaggerated brightness of dynamic mode and the excessive dimming known from eco settings. And it must be admitted that, for a device in this price range, the factory calibration is surprisingly decent, although it is not free from a few stumbles. The most noticeable flaw turned out to be an imperfectly adjusted white balance. A slight dominance of the blue component gives the image a subtly cool, chilly character, thus deviating from the exemplary neutrality that the director wanted to show us. The television performs much better in reproducing the grayscale in a standard dynamic range – the gamma curve is executed almost perfectly. A minor reservation can only be made for the darkest parts of the image, where a slight deviation from the norm causes a loss of some detail in the shadows. The most serious challenge for TCL's software, however, was the interpretation of the HDR signal, which is illustrated by the EOTF curve. The television follows its own, rather free path here – the darkest details are disproportionately brightened, followed by a noticeable slowdown in brightness increase for midtones. Fortunately, most of these imperfections are software-related issues that can be eliminated. With this thought in mind, we proceeded to the professional calibration process.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

The calibration process turned out to be a home run, especially in the context of standard dynamic range (SDR) content. We successfully managed to eliminate the TV's tendency to emphasize cool tones, restoring the whites to their natural neutrality. Furthermore, precise adjustments allowed us to correct a slight error in the gamma curve, so the darkest areas of the image regained their proper depth, without a trace of unnatural brightening. The effects are measurable and impressive – in the ColorChecker test, the vast majority of color reproduction errors fell below the perceptual threshold, achieving a deltaE value below 2. This is a result that would not shame much more expensive constructions. Unfortunately, in the case of HDR content, we hit a wall in the form of the inherent limitations of the panel itself. And although we managed to bring the colors in line, the software's specifics mean that the TV still adapts brightness in its own way, as evidenced by the persistent, non-standard EOTF curve. In summary, calibration brings tremendous added value, but one must be aware that it cannot overcome certain physical barriers. A slight boost in black levels, resulting from the lack of local dimming, and limited peak brightness mean that HDR content will not always be able to showcase its full potential. This is simply not the main task of this display; its true strength, especially after professional tuning, lies in the viewing of SDR materials.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

After a series of harsh evaluations, fortunately, the time comes for praise, and this is due to the TCL AiPQ image processor for its work in digital processing and content scaling. It should be noted right away that we are not talking about the level known from flagship designs; nevertheless, in the price segment represented by the P7K/P79K, the results achieved are more than solid. The feature that smooths tonal transitions performs particularly well, effectively eliminating posterization, which are the characteristic bands often visible in materials with higher compression, such as from the YouTube service. The algorithm can elegantly remove unwanted gradients, which ultimately looks really good. The television also competently handles upscaling, which is the task of raising low-resolution materials to 4K standard. The output image, although it may seem a bit too sharp out of the box, fortunately, is not a problem. The software allows for easy adjustment of this parameter using a sharpness slider, so the final appearance can be easily tailored to personal preferences.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The issue of fluidity and sharpness of the image in motion is inextricably linked to the fundamental parameter of the panel, and in the case of the TCL P7K/P79K, we are dealing with a panel that has a native refresh rate of 60 Hz. This specification already defines its capabilities and makes it difficult to unequivocally recommend it to enthusiasts of dynamic sports broadcasts. During rapid camera movements, the image loses sharpness, and the panel itself also shows a slight tendency to blur, which may be noticeable to more sensitive viewers. Fortunately, not everything in this aspect has been left to chance. The manufacturer has implemented a simple motion smoothing system, which is primarily used in film materials recorded at 24 or 30 frames per second. Thanks to a dedicated slider, the user can independently decide on the final character of the motion – from a fully cinematic, slightly juddery image to achieving a very smooth, almost theatrical effect. It is a simple yet effective tool that allows users to tailor the viewing experience to their own preferences.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

Although on paper the native 4K@60Hz matrix might suggest that the TCL P7K/P79K is not a TV tailored for gamers, the reality turns out to be surprisingly different. On the contrary, the manufacturer has ensured a rich package of features that make it a very friendly companion for next-generation consoles. Onboard, we find key technologies such as ALLM, which provides automatic switching to low-latency mode, and VRR, or variable refresh rate, which eliminates screen tearing. The list is completed by support for Dolby Vision Gaming and a simple yet functional Game Bar. However, the real and extremely pleasant surprise is something else. It turns out that the TV easily supports high refresh rate signals of 120 Hz, but at lower resolutions – 1080p and 1440p. This is fantastic news for console owners who know full well how rarely games run in native 4K at a full 120 frames per second. The ability to choose between higher resolution and doubled smoothness is therefore an extremely sensible compromise.

In summary, although the P7K/P79K may not be the target screen for the most avid tournament gamers, it offers a package of options for the casual or occasional console user that is hard to find among many competitors at this price point.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.