TCL P755 vs Samsung DU7192 (VA)

The TCL P755 delivers an average HDR experience, with a maximum brightness of just under 300 nits. This limitation affects the intensity of bright areas in HDR content, reducing the contrast impact, as bright elements may appear less pronounced. However, the TV compensates with an impressive 93% coverage of the DCI-P3 colour gamut, which brings vibrant, saturated colours that enhance the quality of HDR content. Despite the brightness cap, the extensive colour range enriches hues, providing a more lifelike and visually engaging viewing experience.

The peak brightness of the television is about 280 nits on the luminance charts. Unfortunately, this value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness significantly limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently exposed. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely insufficient when it comes to HDR. Additionally, the coverage of the DCI-P3 color palette at 82% does not favor the presentation of HDR content in its full glory. The limited color gamut makes it difficult for the television to reproduce vibrant and diverse colors, which is crucial for achieving a cinematic experience.

In Cinema mode, the colour reproduction on the TCL P755, while set to the best factory configuration, falls short of ideal accuracy. The primary issue is the white balance, where the red component is notably elevated and the green is reduced. This imbalance shifts colours towards red, making them appear unnatural, particularly in scenes featuring white or neutral tones. This issue is highlighted in the Colour Checker test, which shows a discernible red bias affecting the realism of the image and diminishing the perception of colour depth.

Examining contrast performance, the gamma graph analysis reveals notable inconsistencies, especially in darker areas, where values dip below the target level of 2.4. Consequently, shadows and darker sections are displayed brighter than intended, impacting overall contrast. Furthermore, the EOTF (Electro-Optical Transfer Function) curve, essential for accurate brightness representation, veers slightly above the reference curve. The data shows a boost in brightness up to around 50% before a gradual levelling off. This creates excessive mid-tone brightness, which can lead to loss of detail and some distortion in brighter scenes, ultimately affecting the clarity and immersion of the viewing experience.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although this mode is the closest to the intentions of filmmakers, it is not without certain imperfections. The white balance chart shows a clear dominance of red in both SDR and HDR, resulting in significant yellowness, particularly noticeable in whites and on the actors' faces. In HDR mode, there is additionally a slight dominance of green, which, however, does not have as much impact on the overall perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest areas of the image, it was too low, leading to excessive brightness in those scenes, depriving the film of drama and contrast. In HDR, the white balance remains at a similar level, but the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to strong brightness in the darkest scenes. Then the result drops sharply below the reference line, resulting in an image that is too dark and a loss of dynamics in the brighter areas.

To summarize, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest areas of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

Post-calibration, the TCL P755 delivers a markedly improved colour performance for SDR content. The colour curves now align closely with ideal values, with a more consistent gamma stability across the range. While a slight drop at the beginning of the gamma curve persists, the accuracy in colour reproduction is significantly enhanced. The Colour Checker test reveals most colour samples are now under an error threshold of 2, showcasing much-improved colour fidelity with only minimal deviations, resulting in colours that feel notably more authentic to life.

HDR content benefits from these calibration adjustments as well. White balance corrections lend a more natural tone, with colours appearing more balanced overall. The EOTF curve, while nearer to the ideal reference line, still features a mild brightness elevation at the start, which can cause minor distortions in exceptionally bright scenes. However, overall tonal quality and detail resolution have both improved. Tone mapping also performs more effectively, enhancing detail in bright regions while maintaining better image accuracy.

In summary, while calibration does not bring flawless performance, it makes a substantial difference in the P755’s visual quality. Following these adjustments, the television provides a more accurate, realistic viewing experience in both SDR and HDR content, smoothing out many of the previous colour inconsistencies for a more visually engaging result.

Even with its lower models, Samsung offers extensive tools for image calibration, allowing for significant improvement of factory settings. We undertook this task, and the results proved to be more than satisfactory. The white balance, which previously exhibited strong yellowing in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to appropriately model the gamma in SDR materials, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main cause lies in the limited brightness of the television, which does not allow for a full representation of HDR content dynamics. Nevertheless, after calibration, the picture is clearly better and more aligned with the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

The "Gradual Smoothing" function on the TCL P755 performs effectively, reducing visible boundaries between shades of the same colour and creating smoother tonal transitions. Unfortunately, this feature is unavailable in HDR mode, which can impact the quality of tonal gradations in high dynamic range content.

In terms of image scaling, the television shows some limitations. There are visible edge cut-offs, especially noticeable around figures and tree branches, which result in some detail blurring and a reduction in overall image sharpness. This is particularly noticeable when viewing lower-resolution content. Additionally, SD-quality images display a slight crop at the top and bottom, which may further impact viewing for standard-definition content.

The tonal smooth transition function operates in two modes – "off" and "auto." Turning it off causes gradation issues, while the "auto" mode provides smooth transitions but at the expense of grain and details that are often blurred. Due to these limitations, we do not recommend using this function, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation means that the television is better suited for higher resolution content.

The TCL P755 delivers satisfactory, though not flawless, motion smoothness. It includes a "Flicker Reduction" feature for films, allowing users to fine-tune motion smoothness on a scale from 1 to 10. This setting offers flexibility in tailoring the image to cinematic or more theatrical preferences, adjusting for a slower or faster appearance according to personal viewing taste.

Although the Samsung DU7192 is the lowest model in the manufacturer's offer, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence distinguishes the television from competitors in this price range. The television supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we find, among others, the "Motion Blur Reduction" function. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image exhibits characteristic stuttering known from material recorded at 24 frames per second, which makes this function practically fail to fulfill its role.

The TCL P755 comes equipped with gamer-oriented features like ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gaming, and a Game Bar. ALLM automatically activates low latency mode to enhance response times and reduce input lag, while VRR syncs the screen refresh rate with the console's frame output, minimising screen tearing for a smoother gaming experience. Dolby Vision for gamers brings improved colour and contrast for compatible games, and the Game Bar allows easy access to essential settings like response time.

However, the 60 Hz panel limits the display to this refresh rate across resolutions, which may impact the fluidity in high-motion games. The absence of G-Sync also affects PC gamers, as gameplay on computers lacks this technology's extra smoothing. Notably, HGiG mode, meant to optimise HDR game visuals, is not fully functional on this model, which slightly detracts from the HDR gaming experience.

The Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means a lack of support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers basic features for gamers – automatic switching to low latency mode (ALLM) and support for basic HDR for games in the HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for fully enjoying the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustments of settings for games. The presence of this feature could significantly enhance user comfort, especially among those who frequently change display modes.