TCL P755 vs Haier Q80FUX

The TCL P755 delivers an average HDR experience, with a maximum brightness of just under 300 nits. This limitation affects the intensity of bright areas in HDR content, reducing the contrast impact, as bright elements may appear less pronounced. However, the TV compensates with an impressive 93% coverage of the DCI-P3 colour gamut, which brings vibrant, saturated colours that enhance the quality of HDR content. Despite the brightness cap, the extensive colour range enriches hues, providing a more lifelike and visually engaging viewing experience.

Alright, let's move on to the topic that generates so much discussion, namely the capabilities of the TV in HDR mode. Let's make it clear right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s reality is an absolute minimum to even talk about the presence of extended HDR tonal dynamic range. On the plus side, this power is at least stable – regardless of the test pattern or movie scene we used, the measurements invariably oscillated around 300-350 nits. These are therefore at best adequate results, definitely far from the stunning showcase of capabilities that we know from more expensive models. Fortunately, there is one aspect in which the Q80FUX makes up for these shortcomings and does so abundantly. After all, we are talking about a QLED TV (or more precisely, PFS LED), which means that thanks to the quantum dot filter applied to the matrix, it can generate really juicy, vibrant colors. These are not empty promises – a DCI-P3 color gamut coverage reaching nearly 95% is an impressive result that directly translates into very pleasant, saturated colors for the eye.

In Cinema mode, the colour reproduction on the TCL P755, while set to the best factory configuration, falls short of ideal accuracy. The primary issue is the white balance, where the red component is notably elevated and the green is reduced. This imbalance shifts colours towards red, making them appear unnatural, particularly in scenes featuring white or neutral tones. This issue is highlighted in the Colour Checker test, which shows a discernible red bias affecting the realism of the image and diminishing the perception of colour depth.

Examining contrast performance, the gamma graph analysis reveals notable inconsistencies, especially in darker areas, where values dip below the target level of 2.4. Consequently, shadows and darker sections are displayed brighter than intended, impacting overall contrast. Furthermore, the EOTF (Electro-Optical Transfer Function) curve, essential for accurate brightness representation, veers slightly above the reference curve. The data shows a boost in brightness up to around 50% before a gradual levelling off. This creates excessive mid-tone brightness, which can lead to loss of detail and some distortion in brighter scenes, ultimately affecting the clarity and immersion of the viewing experience.

Factory settings for film mode are rarely perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, which resulted from an excessive amount of red in the white balance, giving it a slightly sepia tone. Contrarily, in HDR materials, the television fell into the other extreme—the excess of blue created an unnatural, cold effect. However, it wasn’t the whimsical white balance that was the biggest problem with this TV. The real culprit, responsible for the previously described issues, was hidden deeper. It turned out that the Q80FUX had completely misaligned gamma values and, crucially for HDR, a poorly managed EOTF curve. It was these erroneous factory settings that caused notorious clipping of the brightest parts of the image, applying that characteristic milky filter over them. Thus, we found the source of the problem. This state of affairs led to overall, significant color errors that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of those adjustments in the next paragraph.

Post-calibration, the TCL P755 delivers a markedly improved colour performance for SDR content. The colour curves now align closely with ideal values, with a more consistent gamma stability across the range. While a slight drop at the beginning of the gamma curve persists, the accuracy in colour reproduction is significantly enhanced. The Colour Checker test reveals most colour samples are now under an error threshold of 2, showcasing much-improved colour fidelity with only minimal deviations, resulting in colours that feel notably more authentic to life.

HDR content benefits from these calibration adjustments as well. White balance corrections lend a more natural tone, with colours appearing more balanced overall. The EOTF curve, while nearer to the ideal reference line, still features a mild brightness elevation at the start, which can cause minor distortions in exceptionally bright scenes. However, overall tonal quality and detail resolution have both improved. Tone mapping also performs more effectively, enhancing detail in bright regions while maintaining better image accuracy.

In summary, while calibration does not bring flawless performance, it makes a substantial difference in the P755’s visual quality. Following these adjustments, the television provides a more accurate, realistic viewing experience in both SDR and HDR content, smoothing out many of the previous colour inconsistencies for a more visually engaging result.

The results of our calibration efforts must, unfortunately, be considered twofold. Overall, the image is indisputably better than before the corrections, but the biggest winner of this process turned out to be SDR content. It is here, after clarifying the gamma and white balance graphs, that we obtained results that can confidently be called very good. After the setup, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most challenging skin tone reproductions. Unfortunately, the weakest link still remains HDR content. And here lies the paradox: even though we managed to calibrate the white balance almost to perfection, the overall color errors still remain at a fairly high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate washed-out image effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue color, due to this electronic interference, the screen can still tend to fall into somewhat too cold tones. This television just has it this way.

The "Gradual Smoothing" function on the TCL P755 performs effectively, reducing visible boundaries between shades of the same colour and creating smoother tonal transitions. Unfortunately, this feature is unavailable in HDR mode, which can impact the quality of tonal gradations in high dynamic range content.

In terms of image scaling, the television shows some limitations. There are visible edge cut-offs, especially noticeable around figures and tree branches, which result in some detail blurring and a reduction in overall image sharpness. This is particularly noticeable when viewing lower-resolution content. Additionally, SD-quality images display a slight crop at the top and bottom, which may further impact viewing for standard-definition content.

If there is one area where Haier clearly shows that it has quite a bit to catch up on compared to the market leaders, it is digital image processing. The upscaling, well... is just okay. And that's about all that can be said about it. It does what it is supposed to do: it ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like an overly enlarged postage stamp. However, it is far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest drawback of the Q80FUX software, however, is the almost complete lack of additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient enhancement mechanisms. This means that with older or more heavily compressed materials, we simply have to accept that any imperfections in tonal transitions or color blending, which we mentioned earlier, will constantly accompany us during the viewing.

The TCL P755 delivers satisfactory, though not flawless, motion smoothness. It includes a "Flicker Reduction" feature for films, allowing users to fine-tune motion smoothness on a scale from 1 to 10. This setting offers flexibility in tailoring the image to cinematic or more theatrical preferences, adjusting for a slower or faster appearance according to personal viewing taste.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (though, as we will see shortly, actually only one) designed to improve the experience with older film productions. There is a "De-Judder" slider available, which indeed affects the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a genuine surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to eliminating blur – this is a feature we usually encounter in 120Hz panels, aimed at combating motion blur in sports. However, as expected, recalling memories from testing the K85F model, here too this slider is merely a facade. Moving it does absolutely nothing to the image and it simply looks like an oversight by the product engineers who left a non-functional option in the software for this type of panel.

The TCL P755 comes equipped with gamer-oriented features like ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), Dolby Vision for gaming, and a Game Bar. ALLM automatically activates low latency mode to enhance response times and reduce input lag, while VRR syncs the screen refresh rate with the console's frame output, minimising screen tearing for a smoother gaming experience. Dolby Vision for gamers brings improved colour and contrast for compatible games, and the Game Bar allows easy access to essential settings like response time.

However, the 60 Hz panel limits the display to this refresh rate across resolutions, which may impact the fluidity in high-motion games. The absence of G-Sync also affects PC gamers, as gameplay on computers lacks this technology's extra smoothing. Notably, HGiG mode, meant to optimise HDR game visuals, is not fully functional on this model, which slightly detracts from the HDR gaming experience.

Stepping into the gaming territory, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer." On board, we find today’s highly desired features like VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Although we are not dealing with a 4K@120Hz panel, the TV can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing the conscious switch of the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar," as it’s just a nice addition. The most concerning issues arise when we enter the world of HDR in games. Due to the fact that the TV constantly adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is nearly impossible to accomplish as per the instructions. Worse still, in the Dolby Vision mode for games, the input lag rises to about 50 ms, which is a high enough value that essentially makes this mode unusable. However, generally, we wouldn’t recommend gaming on this TV in HDR mode, so these aren’t such serious shortcomings. The most pleasing aspect is the presence of 120Hz in Full HD, which makes the Q80FUX quite a nice TV for the occasional gamer.