TCL C9K vs Blaupunkt UGC5500S

As we mentioned with black and contrast – the C9K can make a huge impression in synthetic tests. Our measurements showed that on a screen 10% filled with white, the television is capable of squeezing out… 4000 nits of brightness! It sounds astronomical, but – and here, unfortunately, the pattern repeats – the numbers say one thing, and practice says another. In real movie scenes, the situation looks different. At best, when the light effects occupy a large part of the image and the local dimming algorithm does not have to think too hard about what to do with thousands of zones – the effect is really good. At that point, the C9K can reach around 1500 nits, which provides a pleasant, intense flash and can indeed make a positive impression.

The problem starts with smaller elements – such as stars in the sky, the moon, or single reflections. That’s when the proverbial cat comes out of the bag: the algorithms are not yet refined, and brightness drops to even 400–500 nits. That’s a huge difference compared to the potential 4000 nits we saw in laboratory tests. Why does this happen? Most likely, the television is trying to protect the blacks in this way and minimize the halo effect around bright objects. Unfortunately, this comes at the cost of details – some details simply vanish, and the scene loses its nature.

Here, we won't beat around the bush either – if you're looking for a TV strictly for cinematic HDR experiences, you've come to the wrong address. The Blaupunkt UGC5500S unfortunately is not a machine designed for such challenges. This is primarily due to its very low brightness, which we measured during our tests. A result of around 250 nits on film screens speaks for itself. It's simply too little to even talk about any real HDR effect. To be honest, everything displayed here in this format can best be considered a slightly "boosted" SDR mode. We expected this because practically every device in this price range fails in this regard, but we feel obligated to warn you. Manufacturers love to boast about HDR compatibility stickers on the boxes, but in reality, this format simply doesn't exist here – it lacks the "fuel" of brightness.

The situation is made all the more difficult for Blaupunkt because we have a panel with a very basic DCI-P3 color gamut coverage of just around 80%. You won't find any advanced coatings that enhance these capabilities (like quantum dots), making scenes that are supposed to burst with richly saturated colors appear simply desaturated on this screen. Therefore, we have a concrete piece of advice for you: do not push the HDR mode on this model. If you have the option in the streaming app settings – just turn it off. Sticking with the classic SDR mode will ensure that the TV won't try to "enhance" something that it can't handle hardware-wise.

For color tests, as always, we reached for the Filmmaker mode – a new feature in TCL TVs for 2025. And while the direction itself is a step in the right direction, the execution leaves much to be desired. The white balance in SDR content turned out to be too warm – there was an excess of red. On the other hand, in HDR, it went in the opposite direction: the image became excessively blue. The Colour Checker test revealed quite a few color errors that were noticeable to the naked eye. An even bigger problem turned out to be what we mentioned above – brightness management. Regardless of whether we were watching SDR or HDR content, the image tended to blow out the entire scene, giving it an unnatural, even grotesque character. It's hard to call this a "director-created" mode – because the director has certainly never seen such an image.

We also took a close look at how Blaupunkt handles colors in movie mode, and here the situation is, to put it briefly, twofold. We must clearly separate what we see in the standard SDR format from what happens when HDR is turned on, as these are two completely different worlds. Let’s start with the better side of the coin. If you plan to watch classic television, YouTube, or older movies on this TV, you can count on really well-tuned colors. In our test sample, the white balance in movie mode was exceptionally accurate, which honestly surprised us. Of course, to not make it too rosy, we noticed some flaws. Looking at the gamma charts, we observed that the processor struggles with properly dimming the image in its brightest parts. Additionally, there is quite strong, at times too aggressive, red saturation, which resulted in noticeable errors in reproducing certain shades. Nevertheless, in general terms, the image in SDR is simply solid and watchable without a grimace on your face. Unfortunately, the magic fades when we re-enter the world of HDR. Here, Blaupunkt behaves as if we suddenly switched it to store mode, and in its worst form. The excess blue in the white balance is so overwhelming that it literally clashes with the eyes, ruining any realism of the scene. Furthermore, the TV interprets brightness very loosely, which, when analyzing the EOTF curve, clearly showed that for most of the time the colors appear simply washed out and lacking depth. This is, by the way, perfectly visible in the color errors that become evident in this mode. Once again, we are left with the same conclusion: Blaupunkt in SDR mode looks significantly better and more natural than in HDR, which feels forced and not properly refined.

After calibration, we finally managed to tame the white balance – and it immediately translated into a more natural image. Colors finally started to look the way they should, and the overall presentation was incomparably better than in the factory settings. In other words – it’s worth taking a moment to improve this, as the gain is truly significant. The gamma responsible for managing brightness was also brought into order in SDR content, and the effect was more than satisfying. Unfortunately, when we turned on HDR materials, the situation quickly became complicated. No matter how we set the local dimming, the television had a tendency to do what it liked with the image – either it overexposed everything or dimmed the darkest parts too much. Exactly as we saw in the scene from the movie Billy Lynn. So, the color improvement after calibration makes a great impression, but brightness management in HDR remains the Achilles' heel of C9K and presents a certain technological limitation.

It may sound like a joke – pulling out professional measurement equipment for a television costing around a thousand zlotys / 250 dollars – but we wouldn't be ourselves if we didn't check it out. The question is: does such cheap equipment give us any room for calibration? To your surprise, the answer is yes, and absolutely so. In the Blaupunkt UGC5500S menu, we found surprisingly many options that allowed us to really work on the picture. These are not just empty sliders; they are concrete tools that enabled us to make use of our measurement sensors and software. In SDR mode, the effects were noticeable to the naked eye. We successfully eliminated the issue we mentioned earlier – that excessive, almost artificial saturation of reds. We also fixed the problem of incorrect dimming of the brightest parts of the image. After calibration, the standard format picture became much more balanced and simply correct. As for HDR, the situation was again more complicated. Although we managed to "tame" that aggressive blue tint in the white balance, it was evident that we were fighting a bit in vain. Even after changing the settings, the television still tried to intervene in the image in its own way, as if the electronics knew better than we did how the scene should look. Additionally, there's a hardware barrier that no slider can overcome – colors in HDR still remain unsaturated. This simply results from the quality of the panel itself; it physically cannot produce the most vibrant colors. To summarize this point: if any of you ask whether it’s possible to calibrate a television for "a thousand," we respond with full conviction: it is possible.

Digital image processing in TCL C9K is quite mediocre. The tonal smoothing feature seems to be present, but turning it on practically changes nothing – color bands are still visible, and it can unintentionally highlight elements we would prefer to hide, such as textures of objects. Fortunately, it doesn’t remove film grain, but that’s small comfort since the effects are still poor. Therefore, it's hard to recommend using this option.

On the other hand, image scaling performs much better. Lower quality materials look quite decent – characters and backgrounds are presented clearly, although, of course, with sources at 576p, physics cannot be fooled. Sometimes, characteristic aliasing on objects appears, but that’s the fault of the source itself, not the algorithm. A plus for not having issues with overscan – the image is not artificially cropped or enlarged.

If you expect that the processor in this model will magically "fix" the poor quality signal from cable TV or old films from YouTube, we must disappoint you. The capabilities of this television end with absolutely basic upscaling, which is simply stretching the image to a higher resolution. It does this correctly in that the image is not blurry, but there is no talk of any intelligent sharpening or adding details. Worse still, Blaupunkt is completely devoid of any functions that reduce unwanted tonal transitions. If the material being viewed has so-called banding (ugly "steps" instead of a smooth transition of colors, e.g., in the sky), this television will display them in all their glory. Additionally, the television tends to slightly crop the edges of the image. Instead of displaying 100% of what the source sends, Blaupunkt slightly enlarges the frame, causing us to lose details located at the very edges of the screen. In summary: in the category of digital "enhancement" of the image, Blaupunkt simply performs poorly. We receive a raw, unprocessed signal with all its flaws.

Like the C8K, the C9K is also a really fast television – both figuratively and literally. It features a 4K panel with a refresh rate of 144 Hz, and at lower resolutions, the display can even ramp up to 288 Hz. This speed translates into practice – when watching sports or playing games, the image looks very smooth and clear. Additionally, in films, we get an extra motion smoother called Motion Clarity, which allows us to adjust the fluidity to our own preferences – from the cinematic "judder" frame to almost theatrical smoothness.

When it comes to motion fluidity, Blaupunkt has nothing to defend itself with. A 60 Hz panel at this price is standard, so none of us expected a perfectly sharp image during fast action scenes or while watching a game. However, the biggest drawback of this model is that you won't find any digital smoothers in the menu. The manufacturer did not give us any room to maneuver – there's no way to smooth anything out or adjust the image to our preferences. The image is always "raw" and we receive it exactly as the source transmits it. For fans of cinematic "motion jump," this might be fine, but everyone else just has to get used to the absence of any motion support.

For gaming, the TCL C9K is a complete tool. Here we have two (out of four) HDMI 2.1 ports with full bandwidth of 48 Gbps, so all key technologies work: VRR (variable refresh rate) and ALLM (automatic low latency mode). Additionally, the manufacturer added a really intuitive Game Bar, which allows you to quickly preview the most important parameters and adjust settings without digging through the menu. Also, TCL's policy is a plus – the TV is not afraid of any HDR formats, even in game mode. Whether it's HGiG or Dolby Vision for the Xbox Series S/X console – everything works as it should, giving the player wide freedom.

When it comes to gaming on the Blaupunkt, we didn’t expect miracles and indeed – the list of features is not very long. However, there are two interesting points worth mentioning, as they may be significant for some of you at this price. The first advantage is that the TV quite efficiently detects the connected console. Thanks to the ALLM (Auto Low Latency Mode) feature, the device automatically knows when you start gaming and switches to low latency mode. This is convenient because you don’t have to fiddle with the settings every time to prevent input lag from ruining the fun. The second point is a real curiosity that surprised us. Even though it’s a 60 Hz panel, the Blaupunkt can display images at 120 Hz at Full HD resolution. Sure, we lose 4K details then, but for those playing more dynamic, online shooters where fluidity is more important than resolution, it’s a really nice and unexpected addition in such an inexpensive piece of equipment. Besides these two points, however, you won’t find anything else here. There are no advanced systems for improving fluidity for gamers or extensive gaming menu bars. It’s a simple screen for occasional gaming.