TCL C75B vs SONY BRAVIA 3 II (XR35M2)

During our luminance test, the TCL C75B "spat out" about 380 nits of brightness. We recorded similar results while watching most of the films we tested. These can be considered average – the television does not perform badly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, such results are better than those of budget models, which can achieve nearly half as low brightness values. However, for HDR enthusiasts seeking stronger light effects and greater realism, the C75B may prove insufficient. On the plus side, it's worth mentioning the 95% coverage of the DCI-P3 color palette. This is a very good result that easily suffices to enjoy a wide range of colors in content available on popular streaming platforms. Vivid and rich colors are definitely a strong point of this model.

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it's far from the strongest designs on the market. That said, HDR here is not just a paper feature. Compared with regular SDR material, the brightest parts of the image can already punch through, and reflections, highlights, or stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where many bright elements appear on screen. Then the Bravia 3 II can give a hint of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of strong, striking HDR we get only a correctly rendered picture.

Colors

Bravia 3 II uses a QLED-type panel, although technically it does not use a traditional quantum-dot layer. Instead Sony applied a PFS phosphor-based solution that serves a very similar role: it allows for more saturated reds and greens and thus lets the TV display a much wider color gamut. Measurements showed about 94% coverage of the DCI-P3 gamut and about 74.4% of the very wide BT.2020. Those are good results for this class of hardware, meaning the Bravia 3 II has no problem showing adequately saturated colors in HDR content. Colors don't look washed out, and the more intense shades can look really attractive.

TCL C75B offers many picture modes, but in our opinion, the best choice is the "Film" mode. Although its settings are quite good, the television struggles with certain color reproduction issues. In tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered correct. This effect was particularly noticeable in skin tones, which appeared unnaturally warm. The main culprit of this phenomenon turned out to be the white balance, characterized by an excessive amount of blue and red in both HD and 4K HDR materials.

Another issue was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, lost in total blackness (e.g., the bottom part of the screen in the comparative photo - the area around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that a similar problem may be encountered in 4K HDR content.

Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and see how much could be extracted from this model after professional calibration. Details are described in the next section.

In Professional mode the Bravia 3 II, straight out of the box, delivers a fairly good level of color reproduction. In SDR the most noticeable issue is a slightly low gamma, which makes the midtone areas a bit brighter. White balance is not perfect either; as brightness increases there is a slight lack of blue and red, so whites can sometimes take on a slightly warmer, mildly greenish tint. However, these are not errors that immediately stand out while watching a movie. Average error values hover around 3, so the factory preset can be considered quite good. The situation is similar in HDR. Here again there is a slight deficiency in the blue component, so the image is a touch warmer than the reference, but the difference is not large enough to be significantly distracting during normal viewing.

After calibrating the TCL C75B, it has clearly improved in terms of color reproduction. Although the TV does not offer many options for adjusting the white balance, we were able to refine its settings significantly. As a result, the image has stopped being overly pink, and the colors now look much more natural and harmonious.

The gamma jump, which was previously a problem, has not disappeared completely, but we managed to significantly reduce it. This has made the details in dark scenes more visible – both in HD and 4K HDR material.

Unfortunately, the lack of local dimming is still noticeable. The "glowing black" effect remains, but that's a limitation of the display itself. Despite this, the colors after calibration look vastly better, and the image is much more enjoyable to watch.

After calibration you can get a lot out of SDR content. The white balance was set almost perfectly, gamma practically matches the reference value, and average color errors fell from around 3 to about 1. That's a level at which differences from the reference image are, in practice, very hard to detect. The Bravia 3 II therefore shows that despite its position in Sony's lineup it has quite a lot of potential for precise picture tuning. Improvements are also visible in HDR, although here you can no longer work around all of the TV's limitations. After equalizing the colors it's easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II slightly darkens part of the image. That's not ideal from a reference standpoint, but in this particular TV it also has an advantage. With no local dimming and average black levels, this behavior slightly reduces the visibility of the backlight in darker scenes and helps maintain a greater sense of contrast. So you could say Sony partially masks the limits of the panel that way, rather than trying at all costs to stick to the reference luminance.

The TCL C75B has a tonal transition smoothing feature, but unfortunately, we can't praise it. Regardless of the selected level – low or high – tonal transitions in older materials remained visible, as if the feature didn't work at all. It's hard to say something positive about it because, in practice, it seems completely useless.

The image scaling is better. The TV performs quite decently, although on thinner elements, like branches in the background, you can notice slight halos. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is the trimming of the image edges. In our tests, it happened that news tickers or other elements close to the edge of the screen were cut off. This is definitely something worth paying attention to, especially if we use the TV for watching news programs or content with text on the screen.

The Bravia 3 II is Sony’s first TV to use the new MediaTek Pentonic 800 chipset, and you can see a few changes in image processing. Starting with the basics: upscaling is solid. The TV can sensibly upscale lower-resolution material and doesn’t have a strong tendency to overemphasize jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming the picture remains quite pleasing. We have more reservations about the digital image processing. In this model Sony replaced the well-known "Smooth Gradation" feature with a new setting called "Digital Noise Reduction." Its role is essentially the same: to smooth unpleasant tonal transitions and artifacts caused by heavy compression. Unfortunately, this feature performs noticeably worse than before. At the "Large" setting — the only one that noticeably affected the picture — the TV can smooth away too many image elements at once, causing film grain to disappear and surface textures or even character skin to start looking unnatural. Worse, the effect is not very consistent. When a scene contains more motion the function’s effect weakens significantly and at times it looks as if the TV stops intervening in the image altogether. For everyday viewing we therefore don’t recommend using it at a high level. It can help on a static shot, but the price is often too much loss of detail.

TCL C75B definitely has something to offer gamers. The TV is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really great results, especially for a model from the budget range.

Additionally, there are features for improving smoothness and reducing motion blur in films. The "Motion" option allows for precise adjustment of the effect on a 10-step scale, providing a lot of customization options – everyone can set the smoothness to their liking.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Here Sony has managed to get that problem very well under control. Fast-moving objects remain sharp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It's one of the least smearing LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series: the Bravia 9 II.

The TCL C75B is undoubtedly a television designed for gamers. It offers almost everything that the most demanding console users need. With the implementation of full-bandwidth HDMI 2.1, the television supports features such as ALLM (automatic low latency mode) and VRR (variable refresh rate) – operating across the full capabilities of the TV, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, which allows for even better detail representation in HDR-optimized games. The C75B is also equipped with a very convenient interface for gamers in the form of a Game Bar, where you can check all key parameters, such as refresh rate, input lag, or picture settings – all within one click's reach.

In a nutshell: the C75B is an excellent choice for gamers, offering a wide range of features that allow for fully enjoying the capabilities of modern consoles and games.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been handled the way we'd like. The biggest change concerns the connections. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the long-standing issues that has plagued the manufacturer's TVs. You can connect several devices at once and use each input's full capabilities, including VRR and ALLM. There's also a simple Game Bar that lets you check key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. This won't be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow disabling tone mapping on the Bravia 3 II, so the TV continuously processes HDR content even when you would prefer to leave that task to the console. You can most easily notice this during HDR setup. The checkerboard pattern does not disappear at the point corresponding to the TV's actual capabilities. That doesn't mean HDR in games will look bad. You just need to approach the setup a bit differently and, instead of relying on the pattern, manually set the peak brightness to about 450 nits. The issue can be worked around, but you should know about it before you start configuring your console.