TCL C75B vs Philips PUS7000

During our luminance test, the TCL C75B "spat out" about 380 nits of brightness. We recorded similar results while watching most of the films we tested. These can be considered average – the television does not perform badly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, such results are better than those of budget models, which can achieve nearly half as low brightness values. However, for HDR enthusiasts seeking stronger light effects and greater realism, the C75B may prove insufficient. On the plus side, it's worth mentioning the 95% coverage of the DCI-P3 color palette. This is a very good result that easily suffices to enjoy a wide range of colors in content available on popular streaming platforms. Vivid and rich colors are definitely a strong point of this model.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

TCL C75B offers many picture modes, but in our opinion, the best choice is the "Film" mode. Although its settings are quite good, the television struggles with certain color reproduction issues. In tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered correct. This effect was particularly noticeable in skin tones, which appeared unnaturally warm. The main culprit of this phenomenon turned out to be the white balance, characterized by an excessive amount of blue and red in both HD and 4K HDR materials.

Another issue was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, lost in total blackness (e.g., the bottom part of the screen in the comparative photo - the area around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that a similar problem may be encountered in 4K HDR content.

Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and see how much could be extracted from this model after professional calibration. Details are described in the next section.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

After calibrating the TCL C75B, it has clearly improved in terms of color reproduction. Although the TV does not offer many options for adjusting the white balance, we were able to refine its settings significantly. As a result, the image has stopped being overly pink, and the colors now look much more natural and harmonious.

The gamma jump, which was previously a problem, has not disappeared completely, but we managed to significantly reduce it. This has made the details in dark scenes more visible – both in HD and 4K HDR material.

Unfortunately, the lack of local dimming is still noticeable. The "glowing black" effect remains, but that's a limitation of the display itself. Despite this, the colors after calibration look vastly better, and the image is much more enjoyable to watch.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

The TCL C75B has a tonal transition smoothing feature, but unfortunately, we can't praise it. Regardless of the selected level – low or high – tonal transitions in older materials remained visible, as if the feature didn't work at all. It's hard to say something positive about it because, in practice, it seems completely useless.

The image scaling is better. The TV performs quite decently, although on thinner elements, like branches in the background, you can notice slight halos. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is the trimming of the image edges. In our tests, it happened that news tickers or other elements close to the edge of the screen were cut off. This is definitely something worth paying attention to, especially if we use the TV for watching news programs or content with text on the screen.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

TCL C75B definitely has something to offer gamers. The TV is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really great results, especially for a model from the budget range.

Additionally, there are features for improving smoothness and reducing motion blur in films. The "Motion" option allows for precise adjustment of the effect on a 10-step scale, providing a lot of customization options – everyone can set the smoothness to their liking.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The TCL C75B is undoubtedly a television designed for gamers. It offers almost everything that the most demanding console users need. With the implementation of full-bandwidth HDMI 2.1, the television supports features such as ALLM (automatic low latency mode) and VRR (variable refresh rate) – operating across the full capabilities of the TV, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, which allows for even better detail representation in HDR-optimized games. The C75B is also equipped with a very convenient interface for gamers in the form of a Game Bar, where you can check all key parameters, such as refresh rate, input lag, or picture settings – all within one click's reach.

In a nutshell: the C75B is an excellent choice for gamers, offering a wide range of features that allow for fully enjoying the capabilities of modern consoles and games.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.