TCL C75B vs Philips PQS9011 / PQS9001 (The One 2026)

During our luminance test, the TCL C75B "spat out" about 380 nits of brightness. We recorded similar results while watching most of the films we tested. These can be considered average – the television does not perform badly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, such results are better than those of budget models, which can achieve nearly half as low brightness values. However, for HDR enthusiasts seeking stronger light effects and greater realism, the C75B may prove insufficient. On the plus side, it's worth mentioning the 95% coverage of the DCI-P3 color palette. This is a very good result that easily suffices to enjoy a wide range of colors in content available on popular streaming platforms. Vivid and rich colors are definitely a strong point of this model.

Philips PQS9000 is a moderately bright TV; in our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference versus SDR. Sun reflections, lamps, and highlights have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it’s not at a level where bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, the TV raises the black level around a bright object when it brightens that object. That means there’s no clear separation between strong highlights and a dark background, and that contrast is what really shows off HDR. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect stays fairly basic.

Colors

Philips deserves praise for the colors. Although the manufacturer labels this model QLED, a PFS phosphor is used here instead of quantum dots. That solution does not prevent good results, however. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice, it means the vast majority of colors used in HDR movies and series will have proper saturation. Lush greens and intense reds are not a major problem and add appeal to the picture. Limitations are easier to spot in some games and rarer content that uses the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider color coverage, such as SQD or RGB LED, can show more. In its price segment the PQS9000 has nothing to be ashamed of.

TCL C75B offers many picture modes, but in our opinion, the best choice is the "Film" mode. Although its settings are quite good, the television struggles with certain color reproduction issues. In tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered correct. This effect was particularly noticeable in skin tones, which appeared unnaturally warm. The main culprit of this phenomenon turned out to be the white balance, characterized by an excessive amount of blue and red in both HD and 4K HDR materials.

Another issue was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, lost in total blackness (e.g., the bottom part of the screen in the comparative photo - the area around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that a similar problem may be encountered in 4K HDR content.

Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and see how much could be extracted from this model after professional calibration. Details are described in the next section.

Unfortunately, the PQS9000’s factory picture settings for Film mode need some fine-tuning. In SDR the biggest issue is an excess of red in the white balance, which makes whites, grays, and skin tones too warm, sometimes even slightly pink. On top of that, the gamma runs below the target across most of its range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Aside from minor deviations, the components stay close to each other, so there isn’t the pronounced tint seen in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide color gamut. Many hues deviate significantly from the reference, with errors reaching 8–9. So the good gamut coverage we praised earlier doesn’t mean the TV hits specific colors accurately. It can display a wide color range, but out of the box it doesn’t use it very precisely.

After calibrating the TCL C75B, it has clearly improved in terms of color reproduction. Although the TV does not offer many options for adjusting the white balance, we were able to refine its settings significantly. As a result, the image has stopped being overly pink, and the colors now look much more natural and harmonious.

The gamma jump, which was previously a problem, has not disappeared completely, but we managed to significantly reduce it. This has made the details in dark scenes more visible – both in HD and 4K HDR material.

Unfortunately, the lack of local dimming is still noticeable. The "glowing black" effect remains, but that's a limitation of the display itself. Despite this, the colors after calibration look vastly better, and the image is much more enjoyable to watch.

Calibration brought a big improvement, especially in SDR material. We managed to even out the white balance and remove the previous color cast, and the Color Checker measurements now look really very good. Colors are much closer to what should be on the screen, so with regular TV or SDR movies we can be satisfied with the result. Unfortunately HDR somewhat spoils that outcome. On one hand it's limited by the panel's capabilities, since calibration won't improve contrast or replace local dimming. On the other hand there are color errors we couldn't correct because the CMS settings, that is color management, were grayed out and inactive. For that Philips loses points with us. White balance can be fine-tuned, but without access to wide color gamut controls you can't correct colors in HDR as effectively. It's a shame, because the SDR results show the potential is there, it's just not allowed to be fully used everywhere.

The TCL C75B has a tonal transition smoothing feature, but unfortunately, we can't praise it. Regardless of the selected level – low or high – tonal transitions in older materials remained visible, as if the feature didn't work at all. It's hard to say something positive about it because, in practice, it seems completely useless.

The image scaling is better. The TV performs quite decently, although on thinner elements, like branches in the background, you can notice slight halos. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is the trimming of the image edges. In our tests, it happened that news tickers or other elements close to the edge of the screen were cut off. This is definitely something worth paying attention to, especially if we use the TV for watching news programs or content with text on the screen.

The digital image processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality material, but it works quite unevenly. It can improve a section of the picture, only to, moments later and still within the same scene, seem to lose effectiveness and reintroduce banding between shades. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best, and that's the one we recommend. The 4K upscaling itself is acceptable, though the picture is very soft. Edges are heavily smoothed, which may make the image feel less crisp to some viewers. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges stand out more. Don't overdo the sharpness slider, however, or you may introduce artificial halos instead of improving the picture.

TCL C75B definitely has something to offer gamers. The TV is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really great results, especially for a model from the budget range.

Additionally, there are features for improving smoothness and reducing motion blur in films. The "Motion" option allows for precise adjustment of the effect on a 10-step scale, providing a lot of customization options – everyone can set the smoothness to their liking.

In terms of motion handling, the Philips PQS9000 performs outstandingly for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's especially pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and Philips pleasantly surprised us in that regard. To adjust how motion is displayed there is the "Motion Style" function. It includes two sliders: "Smoothness" and "Blur Reduction," which let you tailor the effect to the content you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try different levels of smoothing to see which you prefer.

The TCL C75B is undoubtedly a television designed for gamers. It offers almost everything that the most demanding console users need. With the implementation of full-bandwidth HDMI 2.1, the television supports features such as ALLM (automatic low latency mode) and VRR (variable refresh rate) – operating across the full capabilities of the TV, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, which allows for even better detail representation in HDR-optimized games. The C75B is also equipped with a very convenient interface for gamers in the form of a Game Bar, where you can check all key parameters, such as refresh rate, input lag, or picture settings – all within one click's reach.

In a nutshell: the C75B is an excellent choice for gamers, offering a wide range of features that allow for fully enjoying the capabilities of modern consoles and games.

Gaming features

When it comes to gaming features, the Philips PQS9000 really has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to decide which one gets the full-capability port. Consoles can use 120 Hz in Full HD, 1440p and 4K, and a PC can also take advantage of 144 Hz at 4K or 240 Hz if you drop down to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range goes from 48–240 Hz, with the upper limit applying to Full HD mode.

ALLM is included, so the TV automatically switches into game mode, and HGiG works correctly, which is useful when setting up HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but that option is hard to enjoy because of very high latency. Apart from that caveat, the feature set is really solid.