TCL C75B vs Dreame S100

During our luminance test, the TCL C75B "spat out" about 380 nits of brightness. We recorded similar results while watching most of the films we tested. These can be considered average – the television does not perform badly in this segment, but around 400 nits is definitely too low to fully experience the magic of HDR effects. Of course, such results are better than those of budget models, which can achieve nearly half as low brightness values. However, for HDR enthusiasts seeking stronger light effects and greater realism, the C75B may prove insufficient. On the plus side, it's worth mentioning the 95% coverage of the DCI-P3 color palette. This is a very good result that easily suffices to enjoy a wide range of colors in content available on popular streaming platforms. Vivid and rich colors are definitely a strong point of this model.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached about 600 nits. This is a really good result, although not the highest, considering the capabilities of the competition in this price range. In fullscreen scenes, it is evident that the television can generate an image that strikes with brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of HDR effect – and in a drastic way. In such scenes, the brightness of bright elements dropped below 100 nits, which is a truly tragic result, far from any HDR effect. This aspect can be improved, though not without any "buts." It is enough to change the local dimming setting in the television's menu, but then the blacks in such scenes simply turn gray. It’s a pity that Dreame could not refine the local dimming algorithms better, and the S100 is another example that the mere number of local dimming zones does not always translate into better image quality. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" television, although in reality it utilizes a PFS LED filter. As a result, the colors are appropriately saturated, and the color gamut coverage we measured exceeded 94% of the DCI-P3 palette.

TCL C75B offers many picture modes, but in our opinion, the best choice is the "Film" mode. Although its settings are quite good, the television struggles with certain color reproduction issues. In tests, we noticed that the image had a noticeably pinkish tint compared to what could be considered correct. This effect was particularly noticeable in skin tones, which appeared unnaturally warm. The main culprit of this phenomenon turned out to be the white balance, characterized by an excessive amount of blue and red in both HD and 4K HDR materials.

Another issue was the way brightness was reproduced. The gamma, which is responsible for the visibility of details in darker materials, was definitely boosted, causing details in the darkest parts of the screen to be invisible, lost in total blackness (e.g., the bottom part of the screen in the comparative photo - the area around the actress's ear). Similarly, the situation was reflected in the EOTF curve, which was below the correct value, suggesting that a similar problem may be encountered in 4K HDR content.

Thanks to our experience and the appropriate tools, we decided to take matters into our own hands and see how much could be extracted from this model after professional calibration. Details are described in the next section.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is available today from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all image-related settings and does not allow any configuration in the menu - not even motion smoothing. So how do the factory colors perform on the S100? Not too bad, but also not great. The TV itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This caused the image to be artificially brightened, and the colors had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how color samples leaned towards blue, generating quite significant color errors. The image in HDR mode looked definitely better, where color errors were not as prominently visible, though they still fell far from ideal. Here, the white balance was also too heavily skewed towards the blue color, which caused quite significant errors in color reproduction.

After calibrating the TCL C75B, it has clearly improved in terms of color reproduction. Although the TV does not offer many options for adjusting the white balance, we were able to refine its settings significantly. As a result, the image has stopped being overly pink, and the colors now look much more natural and harmonious.

The gamma jump, which was previously a problem, has not disappeared completely, but we managed to significantly reduce it. This has made the details in dark scenes more visible – both in HD and 4K HDR material.

Unfortunately, the lack of local dimming is still noticeable. The "glowing black" effect remains, but that's a limitation of the display itself. Despite this, the colors after calibration look vastly better, and the image is much more enjoyable to watch.

The Dreame S100 turned out to be a device very susceptible to professional calibration. In its menu, we found a whole array of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image immediately became much more natural and pleasant to view. After fully tuning the colors, errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any color distortions have become nearly impossible to notice with the naked eye. This is a really nice surprise, as often new brands in the television market have significant problems with proper implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticize is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, we observed anomalies in the EOTF curve we measured. In the areas where high highlights should appear, there is a slight uplift of the curve above the reference line. In practice, this results in unnatural brightening of some of the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

The TCL C75B has a tonal transition smoothing feature, but unfortunately, we can't praise it. Regardless of the selected level – low or high – tonal transitions in older materials remained visible, as if the feature didn't work at all. It's hard to say something positive about it because, in practice, it seems completely useless.

The image scaling is better. The TV performs quite decently, although on thinner elements, like branches in the background, you can notice slight halos. However, this is not something that significantly interferes with daily viewing.

Unfortunately, a bigger problem turned out to be overscan, which is the trimming of the image edges. In our tests, it happened that news tickers or other elements close to the edge of the screen were cut off. This is definitely something worth paying attention to, especially if we use the TV for watching news programs or content with text on the screen.

The scaling and digital processing in the Dreame S100 is handled by a technology that the manufacturer proudly calls Dreamind™ Pro AI. However, it is essential to clarify that this is not a proprietary processor but merely a marketing name for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about quite an outdated unit, from the time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip is responsible for that as well. The upscaling in the S100 is rather mediocre, and the processor tends to strongly and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a "Contour Smoothing" function, which theoretically is supposed to improve tonal transitions. In practice, it brings almost no improvement – setting it to any level rarely eliminates visible color banding but can unnecessarily blur elements of the image that should remain sharp.

A separate problem is the phenomenon of overscan (clipping the edges of the frame), which is almost always visible here. Although there is an option to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you already know, this mode completely blocks any other adjustments in the image menu. In our test tables, we noted that the television offers the option to disable overscan, as technically such a feature exists in the system – however, in everyday use, with reasonable image settings, you will not be able to take advantage of it.

TCL C75B definitely has something to offer gamers. The TV is equipped with a panel that can display images with a refresh rate of 144 Hz in 4K, and even 240 Hz in Full HD. These are really great results, especially for a model from the budget range.

Additionally, there are features for improving smoothness and reducing motion blur in films. The "Motion" option allows for precise adjustment of the effect on a 10-step scale, providing a lot of customization options – everyone can set the smoothness to their liking.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a 144 Hz refresh rate, although in reality, the vast majority of users using it in a traditional way will still be limited to 120 Hz (because today's equipment, apart from PCs, only allows for such values). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC fluidity enhancer. In the menu, we find predefined modes that allow the TV to efficiently add artificial frames, which effectively improves the fluidity of dynamic sports shots, but also helps get rid of image stuttering in film and series materials recorded at 24 frames.

The TCL C75B is undoubtedly a television designed for gamers. It offers almost everything that the most demanding console users need. With the implementation of full-bandwidth HDMI 2.1, the television supports features such as ALLM (automatic low latency mode) and VRR (variable refresh rate) – operating across the full capabilities of the TV, up to 240 Hz in Full HD resolution.

Additionally, the television supports advanced HDR technologies, including Dolby Vision and HGiG, which allows for even better detail representation in HDR-optimized games. The C75B is also equipped with a very convenient interface for gamers in the form of a Game Bar, where you can check all key parameters, such as refresh rate, input lag, or picture settings – all within one click's reach.

In a nutshell: the C75B is an excellent choice for gamers, offering a wide range of features that allow for fully enjoying the capabilities of modern consoles and games.

The Dreame S100 seems almost like the perfect screen for gamers. The TV is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that features such as Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) synchronization in the range of 48-144 Hz work seamlessly on consoles. It also has a well-designed game panel (Game Bar) that allows you to continuously check the most important parameters – from active picture modes to the number of frames rendered by the console, and even the ability to add a crosshair in the center of the screen. All of this looks great on paper, but the biggest issue with the S100 is the implementation of HDR mode in games. The TV does not have a properly implemented HGiG format. As a result, an unsuspecting user may incorrectly configure the console during the initial setup of the display. A wrong configuration can lead to a picture that is too dark or too bright (as a guideline: we suggest setting the brightness in the Xbox console menu to about 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format is also problematic; it often just would not activate at all when using the XBOX – Dreame S100 line. And when it was managed to be activated, gaming was impossible due to a very high input lag that often exceeded 100ms. If the manufacturer can improve the HDR issue in games through an update, the S100 will be truly excellent equipment for gamers. For now, however, one must reckon with compromises.