Sony X75WL vs Philips PUS7000

The luminance chart for the Sony X75WL revealed a peak brightness of just 350 nits, which is underwhelming for an HDR-capable display. This limited brightness means that HDR scenes lack the depth and impactful highlights expected for immersive viewing. Additionally, the subpar coverage of the DCI-P3 colour gamut results in a less vibrant colour representation, negatively impacting the overall quality of HDR content. The combination of insufficient brightness and poor colour gamut coverage significantly diminishes the intended HDR effect, making this model a less compelling choice for those prioritising HDR performance.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Colour reproduction tests on the X75WL model, conducted in movie mode, reveal strengths and weaknesses. While movie mode offers some of the best image settings, it is not flawless. One of the most significant issues with the X75WL is the white balance, particularly for HD and 4K HDR content, where a blue hue dominates the image. This results in a noticeably cold tone throughout. The colour checker confirms these discrepancies, showing a clear shift towards cooler shades.

Regarding brightness, the contrast gamma level is generally acceptable, but the EOTF curve presents more challenges. There are noticeable problems with maintaining consistent brightness, with the image sometimes appearing too washed out or too dim. These issues affect the overall visual experience and hinder the accurate perception of content.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The X75WL is one of those cases where image calibration may not lead to a dramatic transformation, but it does offer a notable improvement in colour perception. The white balance for HD and 4K content, has been significantly enhanced, eliminating the strong dominance of cooler tones. The gamma chart also appears more stable, resulting in better image quality overall. However, the main issue remains the EOTF curve, which controls brightness in 4K content. Due to the technological limitations of the television (such as the IPS panel and the absence of local dimming), a significant improvement is difficult to achieve, as the model’s capabilities are constrained. Despite these limitations, the tonality of the image has been substantially improved.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

The X75WL struggles with low-quality tonal transitions. The lack of any function to improve tonal gradation results in noticeable imperfections in colour transitions, which detracts from the overall image quality. However, the digital processing is commendable, with the image displayed without overscan, and relatively sharp presentation. This added sharpness may appeal to some users, though it does not compensate for the tonal transition issues.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

The X75WL features a 60 Hz panel, making it more suited for movie-watching than high-speed gaming. It is equipped with a motion smoother function called Motionflow, which allows users to adjust picture fluidity on a 10-point scale. This function adds intermediate frames, improving motion smoothness and creating a more cinematic effect by reducing choppiness. Additionally, the clarity adjustment helps reduce motion blur, making it particularly beneficial for fast-paced scenes like sports or dynamic action sequences in films. With these settings, users can fine-tune the fluidity and sharpness of motion to their preferences.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The X75WL is not the best television for gamers, as it lacks some key features that more demanding users expect. While it includes the Auto Low Latency Mode (ALLM) and a basic Game Bar, these are not sufficient for a truly immersive gaming experience. In this price range, features like VRR (Variable Refresh Rate) and a 120 Hz refresh rate—at least in Full HD—have become standard, but unfortunately, these are missing in the X75WL. This is a significant drawback for Sony, as the competition offers more advanced gaming features at a similar price.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.