Sony X75WL vs Philips OLED770

The luminance chart for the Sony X75WL revealed a peak brightness of just 350 nits, which is underwhelming for an HDR-capable display. This limited brightness means that HDR scenes lack the depth and impactful highlights expected for immersive viewing. Additionally, the subpar coverage of the DCI-P3 colour gamut results in a less vibrant colour representation, negatively impacting the overall quality of HDR content. The combination of insufficient brightness and poor colour gamut coverage significantly diminishes the intended HDR effect, making this model a less compelling choice for those prioritising HDR performance.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

Colour reproduction tests on the X75WL model, conducted in movie mode, reveal strengths and weaknesses. While movie mode offers some of the best image settings, it is not flawless. One of the most significant issues with the X75WL is the white balance, particularly for HD and 4K HDR content, where a blue hue dominates the image. This results in a noticeably cold tone throughout. The colour checker confirms these discrepancies, showing a clear shift towards cooler shades.

Regarding brightness, the contrast gamma level is generally acceptable, but the EOTF curve presents more challenges. There are noticeable problems with maintaining consistent brightness, with the image sometimes appearing too washed out or too dim. These issues affect the overall visual experience and hinder the accurate perception of content.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

The X75WL is one of those cases where image calibration may not lead to a dramatic transformation, but it does offer a notable improvement in colour perception. The white balance for HD and 4K content, has been significantly enhanced, eliminating the strong dominance of cooler tones. The gamma chart also appears more stable, resulting in better image quality overall. However, the main issue remains the EOTF curve, which controls brightness in 4K content. Due to the technological limitations of the television (such as the IPS panel and the absence of local dimming), a significant improvement is difficult to achieve, as the model’s capabilities are constrained. Despite these limitations, the tonality of the image has been substantially improved.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

The X75WL struggles with low-quality tonal transitions. The lack of any function to improve tonal gradation results in noticeable imperfections in colour transitions, which detracts from the overall image quality. However, the digital processing is commendable, with the image displayed without overscan, and relatively sharp presentation. This added sharpness may appeal to some users, though it does not compensate for the tonal transition issues.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

The X75WL features a 60 Hz panel, making it more suited for movie-watching than high-speed gaming. It is equipped with a motion smoother function called Motionflow, which allows users to adjust picture fluidity on a 10-point scale. This function adds intermediate frames, improving motion smoothness and creating a more cinematic effect by reducing choppiness. Additionally, the clarity adjustment helps reduce motion blur, making it particularly beneficial for fast-paced scenes like sports or dynamic action sequences in films. With these settings, users can fine-tune the fluidity and sharpness of motion to their preferences.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The X75WL is not the best television for gamers, as it lacks some key features that more demanding users expect. While it includes the Auto Low Latency Mode (ALLM) and a basic Game Bar, these are not sufficient for a truly immersive gaming experience. In this price range, features like VRR (Variable Refresh Rate) and a 120 Hz refresh rate—at least in Full HD—have become standard, but unfortunately, these are missing in the X75WL. This is a significant drawback for Sony, as the competition offers more advanced gaming features at a similar price.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.