Sony Bravia 3 50' (VA) vs LG NANO81A / NANO80A

Interestingly, in the 50-inch version, the Bravia 3 performs slightly better in terms of brightness than its larger variants. In measurements, it achieved around 370 nits, which still aren't values that can compete with top-end televisions, but enough to speak of a semblance of HDR effect. For some users, this level will be acceptable, while others will view it as typical for SDR content, where spectacular bursts or strong contrasts are not expected. It must be clearly stated that the Bravia 3 is not a television for those who want to extract maximum quality from the most challenging film materials.

However, this does not mean that everything is mediocre. Sony equipped this model with an additional PFS filter, which works similarly to solutions used in QLED televisions. As a result, the coverage of the DCI-P3 color palette increased to over 91 percent. In everyday use, this means livelier, more saturated colors and a more pleasing image texture. Even if strong lighting effects are lacking, movies and series can look significantly more attractive than in its predecessor, the X75WL.

If you're counting on HDR in the NANO81A to bring tears to your eyes, I have to disappoint you. This TV is simply too dark to show what this format is really about. With a brightness of just 250 nits, HDR here essentially exists only on paper. In practice, during a viewing session, it's very hard to distinguish whether we're watching high dynamic range content or regular SDR – it simply lacks that "punch" of light in bright areas of the image. But, to not have all criticism, we do have a glimmer of light at the end of the tunnel – and it’s quite clear. It's about color gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is really a solid result that positions this model significantly above typical budget models based on regular white LED lights without any filters. Of course, it's still a bit lacking compared to the level of quantum dot TVs (QLED) or advanced panels with PFS filtering, but for this price range, the colors are surprisingly saturated and vibrant. It's just a shame that this low brightness doesn’t allow them to fully "spread their wings" with the Nano filter.

We primarily tested the Sony Bravia 3 in movie mode, which immediately proved to be the best choice among the factory settings. It's not a perfect picture, but compared to eco mode, which the TV suggests right out of the box, the difference is clear and positive. In movie mode, one can notice a certain problem: the picture seems too warm, which results from a lack of blue in the white balance. Despite this, in SDR content, the final effect can still be considered quite decent and satisfactory for everyday viewing. Much more serious errors appear in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management, combined with limited color gamut coverage, further exposes the shortcomings of the picture in this mode. All this makes HDR on the Bravia 3 look unconvincing and can spoil the impression left by the quite decent SDR content settings. Fortunately, this is not a hopeless situation. All sorts of errors can be somewhat mitigated, and some can even be completely corrected through professional calibration. That’s why we decided to see how the TV would perform after such adjustments.

For every movie fan, the natural choice in LG televisions is the Filmmaker Mode. This mode is designed to display the image as the director intended – without unnecessary "enhancements." Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be white balance. Measurements showed a clear deficiency of blue color, which practically translated to many scenes having a slightly yellowish, almost "too yellow" tint. The white was not perfectly clean, which detracted from the freshness of the image. Additionally, brightness management was not ideal either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, losing its naturalness and depth. Fortunately, LG, even in this relatively low price segment, does not block access to advanced settings. The calibration capabilities of this model are immense, which is a big plus for those who like to "dig around" in the menu. We decided to approach the topic in our own way and see how much we could extract from this panel with professional calibration.

The calibration allowed us to extract significantly more from the Bravia 3 than we could have expected at the beginning. Most importantly, we managed to address the deficiency of blue, which previously caused a noticeable warming of the image. After a slight adjustment in the white balance, most of the errors in the Color Checker measurements for SDR content practically disappeared. The shades of white gained naturalness, and the brightness management in gamma stabilized to a level nearly ideal, not exceeding the threshold of human eye perception. One can therefore confidently say that in SDR content, after a few adjustments in settings, the Bravia 3 performs really impressively. Much worse, though still definitely better than before calibration, is its performance with HDR content. The white balance has been brought under control, but the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which is immediately noticeable. Color-wise, the effect is also improved, although far from perfect – many errors still exceed four, or even five delta E units, meaning they remain visible to the human eye. It was already clear that the Bravia 3 is not a television designed to impress with HDR quality. Nevertheless, it is gratifying that in SDR content, after calibration, the image can look truly great, and in this category, the television surprised us positively.

After calibrating the NANO81A, it's a completely different television. What LG offers in terms of image enhancement tools even in such an inexpensive model deserves a big plus. We were able to completely eliminate that annoying yellowing of whites and make the colors natural, juicy, and simply "true." In SDR content (such as regular TV, YouTube, or older films), the picture now looks infinitely better – it's clear, well-balanced, and no longer strains the eyes with strange hues. It's evident that this panel has considerable potential, which is simply wasted by poor presets out of the box. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The algorithm LG uses in this model is designed very conservatively. The television deliberately dims the image in HDR to avoid overexposing an already weak black from the IPS panel. The developers faced a choice: either provide more light and accept that black will turn light gray, or reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

Bravia 3 brings something more to the Sony TV family than just a common name. It stands out primarily for its ability to enhance the quality of weaker materials thanks to the processor used. Of course, we won't find the advanced XR chip known from more expensive models here, but still, it must be admitted that the image at lower resolutions looked surprisingly good. The upscaling worked effectively, and most parts of the screen were free from the typical excessive edge jaggedness found in budget constructions. The feature that improves the fluidity of tonal transitions is also noteworthy. In the high setting, it works really well, effectively masking gradation imperfections without significant loss of detail. It does happen that the algorithm overly smooths elements that should remain sharp - for example, faces - however, in general, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to people watching lower quality content.

It often happens that cheap 4K panels mercilessly bring all the "dirt" and imperfections of lower resolution materials to light. However, in the case of the LG NANO81A, the situation is quite different. It’s a really solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature that you will find in the settings. It is exceptionally effective in combating color banding, which is a lifesaver when watching low bitrate materials, for example from some streaming services or older files from the internet. However, it is worth maintaining a certain vigilance. Since we are dealing with a less efficient chip than in LG's top models here, too aggressive an adjustment of this option can sometimes result in minor artifacts or a slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The fluidity of motion has never been a strong point of televisions equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that may appeal to those who are more sensitive to the way images are displayed. We are talking about the proprietary motion smoother, Motion Flow, which gives users a lot of adjustment options. Thanks to it, the image can become smoother, almost theatrical, or you can stick with a more cinematic style characterized by the jaggedness that many people simply associate with the filmic atmosphere. These features work for content with lower frame rates, such as movies and series recorded at 24 or 30 frames per second, which are the materials we encounter every day. This is where the motion smoother proves to be one of the most important features in everyday use of the television, and here the Bravia 3 performs really well.

In terms of motion fluidity, the NANO81A unfortunately has a few drawbacks. The TV is based on a panel with a refresh rate of 60 Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat unsatisfied. With such a low native refresh rate, fast-moving objects on the screen will always be a bit blurry.

Bravia 3 is not equipment for e-sports players or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports closes the topic before it even gets a chance to develop. This is a television for a casual gamer who will play FIFA or racing games after work, not for someone who measures every frame in a spreadsheet. Nevertheless, Sony has added a few nice extras to make it feel less bare. ALLM works as it should, automatically switching the television to game mode (low latency). There's even a simple Game Bar that is clear. However, the biggest curiosity here is the PlayStation Portal app. Thanks to it, you can launch games from PS5 wirelessly and see them immediately on the television screen. It sounds great, but it only takes a few minutes to feel significant lag. In our opinion, it's more of a showcase of capabilities than something you can reliably use every day. If someone really wants to play, it's better to connect the console with an HDMI cable and forget about wireless issues.

NANO81A is unfortunately not a device designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model must simply come to terms with. Nevertheless, LG engineers have worked hard to squeeze the maximum capabilities out of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Above all, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. As a result, the image remains stable and does not "tear," and the device automatically switches to low-latency mode as soon as it detects a signal from the console. Managing these settings is incredibly simple thanks to a dedicated system overlay that allows for a quick overview of parameters without leaving the game. A significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles, as it enables the TV to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown out" bright spots, such as clouds or light sources, which unfortunately is a common issue in budget LCD televisions.