SHARP JP7765E vs Dreame S100

So how does the brightness of the Sharp JP7 perform in the most demanding titles? Honestly: at first, we were quite surprised. The television is capable of achieving over 1000 nits of brightness, which is an outstanding and rarely seen result for a device costing just under 2000 zł (for 55 inches). Watching bright, full-screen scenes, one can get the impression that we are dealing with truly good equipment. However, unfortunately, we must return to the problem we mentioned earlier regarding local dimming management. When small, bright elements appear on a dark background on the screen (like in the test scenes from Life of Pi or Sicario 2), it is noticeable how poorly the JP7 handles the zones. The television dims them almost to the maximum, stifling the whole HDR effect, which at such moments resembles a flat SDR image (less than 200 nits). This instability makes the image on the JP7 unfortunately lose its appeal in demanding, contrast-heavy films.

As a consolation, it is worth noting that the panel has the potential for good color display. A PFS (phosphor) filter has been implemented here, allowing the coverage of the DCI-P3 palette to reach a solid 94%. The manufacturer calls its product a “QLED,” even though it is mainly based technologically on the aforementioned PFS filter. Considering the recent market battles among manufacturers about what can and cannot be called QLED, we leave the issue of the correctness of this naming to your judgment. However, it remains a fact that the potential for reproducing saturated colors in this panel is simply good.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached about 600 nits. This is a really good result, although not the highest, considering the capabilities of the competition in this price range. In fullscreen scenes, it is evident that the television can generate an image that strikes with brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of HDR effect – and in a drastic way. In such scenes, the brightness of bright elements dropped below 100 nits, which is a truly tragic result, far from any HDR effect. This aspect can be improved, though not without any "buts." It is enough to change the local dimming setting in the television's menu, but then the blacks in such scenes simply turn gray. It’s a pity that Dreame could not refine the local dimming algorithms better, and the S100 is another example that the mere number of local dimming zones does not always translate into better image quality. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" television, although in reality it utilizes a PFS LED filter. As a result, the colors are appropriately saturated, and the color gamut coverage we measured exceeded 94% of the DCI-P3 palette.

When it comes to out-of-the-box colors, the Sharp JP7 was tested in Film mode, which traditionally offers the most consistent image compared to the yellowed “Eco” mode or the glaring blue of the “Dynamic” mode. Although this is the best choice among the available settings, the results are still far from ideal. The white balance clearly lacked red and blue components, causing many scenes to take on an unnatural, greenish tint. Another issue was the gamma – during fullscreen scenes, the television provides too much brightness, completely stripping away its cinematic character. All of this translated into color reproduction errors, particularly with shades of gray, which exceeded Delta E 10. Just to remind: errors above 2-3 are already noticeable to the human eye, so here we are dealing with a significant distortion of reality.

In HDR mode, the situation is reversed but not any better. Here, the blue color dominates the white balance, giving the image an unnatural, almost “store-like” sharpness reminiscent of aggressive demo modes. Furthermore, the measurements of the EOTF curve emphasize the store-like nature of the image. The graph clearly shows that the television generates an image significantly brighter than the standards predict, resulting in an artificially boosted and unrealistic final effect. The Sharp JP7 is evidently trying to appear stronger than it actually is, but it does so at the expense of fidelity to the content.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is available today from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all image-related settings and does not allow any configuration in the menu - not even motion smoothing. So how do the factory colors perform on the S100? Not too bad, but also not great. The TV itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This caused the image to be artificially brightened, and the colors had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how color samples leaned towards blue, generating quite significant color errors. The image in HDR mode looked definitely better, where color errors were not as prominently visible, though they still fell far from ideal. Here, the white balance was also too heavily skewed towards the blue color, which caused quite significant errors in color reproduction.

We subjected the JP7 to our standard calibration procedure and truly... the television gained a new life thanks to it, especially in SDR content (YouTube, classic television, series, or older movies). Because we managed to accurately set the white balance and stabilize the gamma, color errors dropped to a value of below 3. This is a level at which the human eye has trouble detecting discrepancies. In this scenario, the Sharp JP7 delivers an image with really great color accuracy, which is a significant advantage in this price range. However, the content in HDR turned out to be much more problematic. Here, despite our efforts and adjustments to the settings, the television simply did not want to cooperate. In the JP7 menu, we cannot find any option that would allow for real control over brightness management (EOTF). Although a significant portion of color errors was reduced, the image still remained unnaturally oversaturated. It's a pity because the potential of the mini-LED backlit panel is large, but the software presents a clear barrier.

The conclusion is simple: when watching less demanding content (SDR) on the JP7, you can expect an image that is more than satisfactory, but in HDR, you have to come to terms with a certain degree of "artificiality" that cannot be overcome even with professional equipment.

The Dreame S100 turned out to be a device very susceptible to professional calibration. In its menu, we found a whole array of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image immediately became much more natural and pleasant to view. After fully tuning the colors, errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any color distortions have become nearly impossible to notice with the naked eye. This is a really nice surprise, as often new brands in the television market have significant problems with proper implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticize is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, we observed anomalies in the EOTF curve we measured. In the areas where high highlights should appear, there is a slight uplift of the curve above the reference line. In practice, this results in unnatural brightening of some of the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

When it comes to lower quality materials and how the Sharp JP7 handles them, the situation is ambiguous. Let's start with the upscaling – here we have no major objections. The process of scaling the image to a higher resolution is correct; the image remains readable and clear, without the overscan effect or cropped edges. Of course, this is not at the level of top models and at times one can notice slight jaggedness on the contours, but in this price range, the effect is fully acceptable.

However, the digital image processing itself is significantly worse, as aside from the scaling, it virtually does not exist. In the JP7 menu, we won't find any option that would effectively smooth out unwanted tonal transitions or reduce noise in the image. As a result, the signal reaches the matrix in a very raw form, which, with heavily compressed materials (e.g., from YouTube), leads to visible posterization. Either this is a flaw in the software or a very strange design decision, as in earlier Sharp models, this feature was available and, more importantly, worked with noticeable effect. Here we are left at the mercy of what the source provides, without any digital support from the image processor.

The scaling and digital processing in the Dreame S100 is handled by a technology that the manufacturer proudly calls Dreamind™ Pro AI. However, it is essential to clarify that this is not a proprietary processor but merely a marketing name for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about quite an outdated unit, from the time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip is responsible for that as well. The upscaling in the S100 is rather mediocre, and the processor tends to strongly and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a "Contour Smoothing" function, which theoretically is supposed to improve tonal transitions. In practice, it brings almost no improvement – setting it to any level rarely eliminates visible color banding but can unnecessarily blur elements of the image that should remain sharp.

A separate problem is the phenomenon of overscan (clipping the edges of the frame), which is almost always visible here. Although there is an option to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you already know, this mode completely blocks any other adjustments in the image menu. In our test tables, we noted that the television offers the option to disable overscan, as technically such a feature exists in the system – however, in everyday use, with reasonable image settings, you will not be able to take advantage of it.

The motion fluidity on the Sharp JP7 is very mediocre, and the reason is simple: the television uses a 60Hz panel. This immediately makes it difficult to recommend for watching sports or serious gaming, where higher refresh rates are already the standard. The only real plus is the presence of a motion smoother, which we can control in movies using a slider called De-judder. Lower settings produce a more raw, "cinematic" (frame-based) image, while higher settings add artificial fluidity. We suggest setting it somewhere in the middle of the scale, that is, in the 3-5 range – this is the best compromise to avoid the soap opera effect while getting rid of the tiring image stutter. Interestingly, in the menu, we also find a slider for "motion blur reduction," which usually suggests the presence of a 120Hz panel. However, in the case of the JP7, it does not contribute anything to the image and serves more as a placeholder – it is meant to look good in the settings, but technically it should not function on this panel.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a 144 Hz refresh rate, although in reality, the vast majority of users using it in a traditional way will still be limited to 120 Hz (because today's equipment, apart from PCs, only allows for such values). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC fluidity enhancer. In the menu, we find predefined modes that allow the TV to efficiently add artificial frames, which effectively improves the fluidity of dynamic sports shots, but also helps get rid of image stuttering in film and series materials recorded at 24 frames.

As we mentioned earlier, the 60Hz panel is not a feature that will attract gamers to the Sharp JP7. Perhaps for the casual gamer, whose console generates most titles at 60 frames per second, there might be something interesting? When it comes to specific additions, we find:

• ALLM Mode: Automatically switches the TV to low latency game mode (input lag).

• Game Menu: Which is hard to call a full-fledged “Game Bar,” as its functionality is minimal. Besides enabling ALLM, there is only a smoothness enhancer dedicated to games, which we recommend against because it introduces very noticeable artifacts and spoils the responsiveness.

• Dolby Vision Gaming: For Microsoft's consoles.

Unfortunately, the list of shortcomings is much longer and more painful than the positives. The biggest disappointment is the lack of support for 120Hz, even when lowering the resolution to Full HD. The presence of 120Hz would allow for performance modes to be activated in many games on PS5 or Xbox Series X. Another absence is VRR, which means that during frame drops, we are susceptible to image tearing. The lack of proper implementation of the HGiG standard is also very problematic. This results in the fact that during HDR calibration in the console menu, it is very easy to “overshoot” the brightness settings. As a result, instead of clear details in highlights, we end up with an unnaturally over-brightened image with cut-off details. The Sharp JP7 is a proposal only for very casual gamers.

The Dreame S100 seems almost like the perfect screen for gamers. The TV is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that features such as Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) synchronization in the range of 48-144 Hz work seamlessly on consoles. It also has a well-designed game panel (Game Bar) that allows you to continuously check the most important parameters – from active picture modes to the number of frames rendered by the console, and even the ability to add a crosshair in the center of the screen. All of this looks great on paper, but the biggest issue with the S100 is the implementation of HDR mode in games. The TV does not have a properly implemented HGiG format. As a result, an unsuspecting user may incorrectly configure the console during the initial setup of the display. A wrong configuration can lead to a picture that is too dark or too bright (as a guideline: we suggest setting the brightness in the Xbox console menu to about 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format is also problematic; it often just would not activate at all when using the XBOX – Dreame S100 line. And when it was managed to be activated, gaming was impossible due to a very high input lag that often exceeded 100ms. If the manufacturer can improve the HDR issue in games through an update, the S100 will be truly excellent equipment for gamers. For now, however, one must reckon with compromises.