Samsung The Frame Pro vs Samsung QN80H

Samsung The Frame Pro belongs to relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which, for a lifestyle model, is quite a decent result. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, brightness remained at levels of 700–800 nits. These are values that allow you to fully enjoy HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not handle them very well. It sometimes happens that small elements are excessively dimmed, which weakens the effect, or on the contrary – they are significantly brightened, but at the cost of losing black depth in that part of the image. This can be compared to light glows resembling the spread of a laser beam in dense fog – the effect is visible and bright, but at the same time, it is not very natural and distracts our attention. Fortunately, the color aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colors are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. In general, movies or series watched in HDR on The Frame Pro present a rich color palette, even if the contrast and the operation of the backlight algorithms can sometimes distract our attention.

Samsung QN80H is without a doubt a bright TV. In synthetic tests it breaks the 1000-nit barrier, which on paper already promises a solid HDR effect. In practice the screen really shows its claws, though it can't fully spread its wings (or its backlight 🤔) in every situation. The best impression comes from bright, expansive shots. Sunlit exteriors or heavily lit scenes look really good on it. Brightness then stays around 700 nits, which gives a noticeable step up in quality over standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to heavily dim them, doing everything it can to protect black levels. On one hand we gain better contrast, on the other... we lose some of the dynamics and the sparkle of fine HDR details. The TV therefore has considerable potential, but the dimming algorithm can be too restrictive.

Color gamut coverage

Colors are good too. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 space and about 70% of BT.2020. Today those results won't exactly blow anyone away, but in real-world use they're more than enough to deliver vivid, natural-looking images in most movies and TV series. Colors are properly saturated and, after proper tuning, don't look artificial or overly aggressive.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung paid attention to the factory settings. In SDR content – the type of content most often viewed – The Frame Pro performed really well. White balance and gamma were almost perfectly matched, making the image look natural and consistent. Yes, there were some noticeable errors, especially in skin tones and reds, which could be overly saturated, giving everything a slightly “warmed up” character, but in everyday use, this did not significantly affect the viewing experience. In the case of HDR content, the situation was similar regarding white balance. It was at a good level; however, the biggest problem turned out to be brightness management. The EOTF curve was set in such a way that in many scenes the image appeared to be overexposed, and the brightest areas lost details and turned into solid patches of light. This severely undermined realism and made the colors appear strongly over-sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in its televisions, so we opted for calibration, and its results can be seen below.

The QN80H's factory settings were really good, especially compared with most TVs that come into our tests. Of course, we performed measurements in Filmmaker Mode, and that's the mode we recommend turning on right after the initial setup. In SDR material our unit was set up surprisingly well. The white balance was very even, colors looked natural, and the errors were so small they were hard to spot without measurement equipment. The only weak point was the gamma. In brighter parts of the image the TV brightened them a bit too much, so the picture sometimes lost a little depth. Even so, we'd like most TVs to look this good straight out of the box.

It was a bit worse in HDR. The white balance itself was still set correctly, so the problem wasn't with the colors but with how the QN80H managed image brightness. You could see that immediately on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, at the same time very small points were often dimmed too much. As a result some fine detail simply disappeared. So the factory Filmmaker Mode in HDR isn't bad, but it's definitely not as well calibrated as in SDR.

After calibration, the SDR mode looks simply perfect. We managed to eliminate the overly strong red saturation that previously gave the picture a somewhat excessively warm character. The colors became more balanced, which translated to a natural and pleasant reception of daily content – from television to movies and series from streaming or materials on YouTube. In HDR mode, the EOTF curve required the most work, as it originally caused excessive burning of the entire image. Calibration largely helped to "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limits are set by the television's own design, as edge lighting reveals its limitations, and even the smallest elements of light can still be oversaturated or blend into the background. However, this is a matter of technology, not calibration itself. After the correction, The Frame Pro is much more enjoyable to watch, and it's definitely worth opting for if you want to make the most of your television's capabilities.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to tame the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural, and much closer to how a faithful picture should look.

While the smoothness of tonal transitions in 4K HDR content on The Frame Pro is not a problem at all, naturally with weaker signal quality – from television, HD content, or older Full HD films – imperfections may occur. Therefore, it is crucial how the television handles these limitations thanks to its image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a noticeable but not overly exaggerated way. However, it should be noted that Samsung tends to operate aggressively – even at the lowest setting of this feature, it can "eat" film grain. It is therefore advisable to use it with caution and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively upscale older materials to native 4K resolution while maintaining good sharpness and readability. Movies and series in lower quality simply look better here. However, it is worth mentioning a minor drawback – typical for many Samsung televisions. With very old sources of poor quality, you may notice cropping of the image edges on the left side of the screen. This is not a problem that will ruin the viewing experience, but it is good to know that it may occur.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from earlier models and it still performs very well, especially with lower-resolution material. The image is effectively upscaled to 4K, but without excessive sharpening and without the feeling that the TV is forcing improvements on the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterization and visible banding in poorer-quality material, particularly in low-bitrate streaming. However, it's important to remember that it doesn't work without side effects. It can remove some film grain and slightly smooth the image. So with a good-quality source we'd leave this feature off. If, however, banding and uneven tonal transitions bother you more than losing some grain, "Noise Reduction" can be a really useful addition.

The smoothness of motion in The Frame Pro is ensured not only by the panel, which operates with a refresh rate of up to 144 Hz, but also by the image processor and the smoothing system. It is thanks to this that we can adjust the way we display movies or sports broadcasts to our own preferences. Available are sliders for motion blur reduction and judder reduction – the first function improves the sharpness of fast movements, while the second allows for softening the "jumping" image effect during camera pans. Therefore, everyone can choose between a cinematic character of motion and a smoother, more "television-like" style.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as high as 240 Hz. That's new for Samsung TVs and a nice bonus for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, since consoles use that refresh rate. Here it's really good. The panel doesn't have a big problem with the smearing typical of VA panels, and slight trails behind moving objects are mostly visible on dark backgrounds. This is nothing that would interfere with normal sports viewing or gaming. The TV also includes a motion smoothing system that Samsung calls "Image Clarity." You can adjust judder reduction and blur reduction separately, so it's easy to tailor its operation to movies, sports, or your own preferences.

Samsung The Frame Pro doesn’t pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full suite of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on the fly – from refresh rates to active image processing modes. Are there any downsides? Yes, The Frame Pro doesn’t support Dolby Vision in gaming mode, but it's hard to consider this a serious issue – most gamers use HDR10 anyway... so, the HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user has no ability to enable settings designed for consoles. This is a step backward that may disappoint more informed gamers expecting full compliance with HGiG guidelines. We just hope that this mistake will be quickly corrected.

Interestingly, The Frame Pro also features an atypical arrangement of HDMI 2.1 ports. We have as many as five available – four are located in the One Connect module, and the fifth, in micro HDMI version, is directly on the TV. This solution is quite unconventional, but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimizes potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond matters. We wrote separately about input lag, but it can be revealed here that by connecting equipment directly to the TV, we achieve the absolute maximum response speed.

Samsung QN80H is a TV that scores very well on gamer-oriented features. The biggest new addition for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD resolution. This option is aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. That’s not the end of the list of advantages. The QN80H has four full-featured HDMI 2.1 ports, which in this price range still isn’t standard. You can therefore connect multiple consoles, a PC, or a soundbar at the same time without worrying which input supports the full picture capabilities. The TV also supports VRR, ALLM, and HGiG, so it’s hard to fault its basic feature set. One downside remains the lack of Dolby Vision, which may matter especially to Xbox Series X owners. That said, it’s not a flaw that rules out the QN80H as a gaming TV. Samsung includes a feature still missing from most manufacturers: its proprietary motion interpolator, Game Motion Plus. It’s a motion interpolator that also works in game mode, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby’s processing, especially in more demanding games that don’t offer a 60 FPS mode. The image becomes noticeably smoother while controls remain responsive enough. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped TVs for gamers in its class.