Samsung The Frame Pro vs Philips OLED950

Samsung The Frame Pro belongs to relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which, for a lifestyle model, is quite a decent result. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, brightness remained at levels of 700–800 nits. These are values that allow you to fully enjoy HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not handle them very well. It sometimes happens that small elements are excessively dimmed, which weakens the effect, or on the contrary – they are significantly brightened, but at the cost of losing black depth in that part of the image. This can be compared to light glows resembling the spread of a laser beam in dense fog – the effect is visible and bright, but at the same time, it is not very natural and distracts our attention. Fortunately, the color aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colors are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. In general, movies or series watched in HDR on The Frame Pro present a rich color palette, even if the contrast and the operation of the backlight algorithms can sometimes distract our attention.

OLED950 is a phenomenal TV for consuming HDR content, which is primarily due to the use of innovative Tandem OLED technology. With this technology, the screen is capable of generating astronomical brightness values, reaching over 2000 nits in movie scenes (on test screens). This is an outstanding result, placing the OLED950 model among the very top displays available on the market. However, it should be noted that there is a specific characteristic of this solution – at moments when full-screen bursts of light appear on the screen, the brightness can drop by as much as half. Nevertheless, it is worth emphasizing that values above 1000 nits on a full screen are still an outstanding result. This allows for HDR images to be displayed exactly as filmmakers would wish, maintaining the dynamics and impact of light scenes.

The use of Tandem OLED technology has also brought measurable benefits in terms of color reproduction, improving elements where traditional WOLED panels have had difficulties compared to QD-OLED competitors. In the case of the OLED950, the color gamut coverage is broader than in classic WOLED panels, reaching nearly 100% of the DCI-P3 space and a solid 82% of the demanding BT.2020 palette. Although these results still do not match the high achievements of QD-OLED panels, the difference diminishes during real-world usage. We cannot deny that in the vast majority of films, colors look simply fantastic on this model – they are saturated, vibrant, and full of depth.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung paid attention to the factory settings. In SDR content – the type of content most often viewed – The Frame Pro performed really well. White balance and gamma were almost perfectly matched, making the image look natural and consistent. Yes, there were some noticeable errors, especially in skin tones and reds, which could be overly saturated, giving everything a slightly “warmed up” character, but in everyday use, this did not significantly affect the viewing experience. In the case of HDR content, the situation was similar regarding white balance. It was at a good level; however, the biggest problem turned out to be brightness management. The EOTF curve was set in such a way that in many scenes the image appeared to be overexposed, and the brightest areas lost details and turned into solid patches of light. This severely undermined realism and made the colors appear strongly over-sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in its televisions, so we opted for calibration, and its results can be seen below.

We tested the OLED950 model in Movie mode. Although it is theoretically the best and most faithful preset on this television, in practice, it proved to be not without flaws. Interestingly, in the unit we tested, the biggest challenge wasn't the white balance itself – although it did have a slight tendency to give the image a pinkish tint. The main problem lay in the way the television managed brightness, both in everyday SDR content and in demanding HDR scenes. Analysis of the gamma chart and EOTF curve leads to one key conclusion: the television excessively highlights brightness in the lower registers. This results in the image appearing less contrasty than the panel technology would allow. Details in dark areas that should remain perfectly black (characteristic of "OLED black") are simply unnecessarily highlighted and brightened. Fortunately, these errors can be corrected using the appropriate tools, so – as always – we proceeded with professional calibration.

After calibration, the SDR mode looks simply perfect. We managed to eliminate the overly strong red saturation that previously gave the picture a somewhat excessively warm character. The colors became more balanced, which translated to a natural and pleasant reception of daily content – from television to movies and series from streaming or materials on YouTube. In HDR mode, the EOTF curve required the most work, as it originally caused excessive burning of the entire image. Calibration largely helped to "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limits are set by the television's own design, as edge lighting reveals its limitations, and even the smallest elements of light can still be oversaturated or blend into the background. However, this is a matter of technology, not calibration itself. After the correction, The Frame Pro is much more enjoyable to watch, and it's definitely worth opting for if you want to make the most of your television's capabilities.

As can be seen, the OLED950 transforms into an absolutely phenomenal display after a professional calibration process, which without a shadow of a doubt can be placed in the same category as the best televisions currently available in the world. This equipment only needed a professional touch to show its full potential and eliminate factory shortcomings. The minimal errors in reproduction in Color Checker tests and the fidelity of the color palette speak for themselves. We are dealing with an almost perfect device here. A true window to the world, offering top-notch image quality.

While the smoothness of tonal transitions in 4K HDR content on The Frame Pro is not a problem at all, naturally with weaker signal quality – from television, HD content, or older Full HD films – imperfections may occur. Therefore, it is crucial how the television handles these limitations thanks to its image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a noticeable but not overly exaggerated way. However, it should be noted that Samsung tends to operate aggressively – even at the lowest setting of this feature, it can "eat" film grain. It is therefore advisable to use it with caution and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively upscale older materials to native 4K resolution while maintaining good sharpness and readability. Movies and series in lower quality simply look better here. However, it is worth mentioning a minor drawback – typical for many Samsung televisions. With very old sources of poor quality, you may notice cropping of the image edges on the left side of the screen. This is not a problem that will ruin the viewing experience, but it is good to know that it may occur.

Upscaling

In terms of image scaling, the proprietary P5 processor performs just as well as in most models from this manufacturer. Lower resolution content takes on a very soft and plastic character. Such a presentation will certainly appeal to many. However, if you prefer sharper contours, you can gently enhance them with the appropriate slider in the TV menu. In this aspect, it's really hard to pick on anything. The image simply looks very good and additionally there is no problem with the phenomenon of overscan.

Smoothing and Distortion Reduction

The tonal transition smoothing feature fares a bit worse. In the settings, we find an option called “Distortion Reduction.” This allows for three levels of processor intervention adjustment. Unfortunately, the Minimum setting works poorly and the smoothing effects are negligible. The Medium level gives a decent result, but it also starts to smooth out the skin details of actors. On the other hand, the Maximum setting works too aggressively. It removes definitely too many details from the face and background elements or can even take away the film grain. To achieve the optimal effect, it's worth playing around with these settings at home and adjusting them to your preferences. It might seem that the Medium option represents the best compromise here.

The smoothness of motion in The Frame Pro is ensured not only by the panel, which operates with a refresh rate of up to 144 Hz, but also by the image processor and the smoothing system. It is thanks to this that we can adjust the way we display movies or sports broadcasts to our own preferences. Available are sliders for motion blur reduction and judder reduction – the first function improves the sharpness of fast movements, while the second allows for softening the "jumping" image effect during camera pans. Therefore, everyone can choose between a cinematic character of motion and a smoother, more "television-like" style.

The motion representation in the OLED950 model is virtually perfect. This is typical for screens of this type (OLED 120Hz+), as the matrix shows no blurring at all. Thanks to this, we can enjoy flawless sharpness in practically any conditions. A big part of this is not only due to the specifics of organic technology. Equally important work is done by the smoothing systems implemented by the manufacturer.

Samsung The Frame Pro doesn’t pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full suite of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on the fly – from refresh rates to active image processing modes. Are there any downsides? Yes, The Frame Pro doesn’t support Dolby Vision in gaming mode, but it's hard to consider this a serious issue – most gamers use HDR10 anyway... so, the HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user has no ability to enable settings designed for consoles. This is a step backward that may disappoint more informed gamers expecting full compliance with HGiG guidelines. We just hope that this mistake will be quickly corrected.

Interestingly, The Frame Pro also features an atypical arrangement of HDMI 2.1 ports. We have as many as five available – four are located in the One Connect module, and the fifth, in micro HDMI version, is directly on the TV. This solution is quite unconventional, but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimizes potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond matters. We wrote separately about input lag, but it can be revealed here that by connecting equipment directly to the TV, we achieve the absolute maximum response speed.

OLED950 is almost the perfect TV for gamers. This is not only due to the unique atmosphere that the Ambilight system creates during gameplay. The most important aspect here is the solid hardware support. We find literally everything that one should expect from a modern gaming screen today. The manufacturer has implemented two HDMI 2.1 ports with full bandwidth of 48 Gb/s. This gives us access to gaming in 4K resolution at 120 frames per second. Of course, support for VRR technology and the ALLM automatic game mode is also included. The device handles any HDR signal effortlessly, whether we are using Dolby Vision or the HGiG standard.

Access to all settings is available from one place thanks to the special Game Bar overlay. Although this interface may not be the most graphically attractive on the market, it fully serves its purpose. It displays all the most important signal parameters and offers useful additions. Gamers can take advantage of the mini-map zoom function or add a permanent crosshair on the screen, which can be seen as a small aid in online competition. Adjusting the contrast range also proves useful. It allows for brightening shadows and achieving better visibility of enemies hidden in the dark corners of the map.