Samsung The Frame Pro vs IFFALCON U85X

Samsung The Frame Pro belongs to relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which, for a lifestyle model, is quite a decent result. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, brightness remained at levels of 700–800 nits. These are values that allow you to fully enjoy HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not handle them very well. It sometimes happens that small elements are excessively dimmed, which weakens the effect, or on the contrary – they are significantly brightened, but at the cost of losing black depth in that part of the image. This can be compared to light glows resembling the spread of a laser beam in dense fog – the effect is visible and bright, but at the same time, it is not very natural and distracts our attention. Fortunately, the color aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colors are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. In general, movies or series watched in HDR on The Frame Pro present a rich color palette, even if the contrast and the operation of the backlight algorithms can sometimes distract our attention.

iFFALCON U85 handles HDR in a rather dual manner – on one hand, it can surprise with a solid peak brightness of around 650 nits, which places it well above average in this price segment. This is particularly evident in full-screen, bright scenes. Examples from movies like Life of Pi or the final test sequences from The Meg prove that the TV can maintain the strength and essence of the HDR effect when the entire panel has to "light up," delivering truly satisfying experiences. However, problems begin in high-contrast scenes, where smaller, bright details appear on the screen; the dimming algorithms prioritize deep blacks to such an extent that they can suppress the brightness of small highlights to just 100 nits, drastically reducing the dynamism of the image and depriving us of the true "punch" we expect from HDR standards. However, the question of colors remains a sweetener; thanks to the use of the PFS phosphor filter (marketed as QLED by the manufacturer), they look very good, achieving nearly 94% coverage of the DCI-P3 color palette, allowing for a rich and vibrant image in most content.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung paid attention to the factory settings. In SDR content – the type of content most often viewed – The Frame Pro performed really well. White balance and gamma were almost perfectly matched, making the image look natural and consistent. Yes, there were some noticeable errors, especially in skin tones and reds, which could be overly saturated, giving everything a slightly “warmed up” character, but in everyday use, this did not significantly affect the viewing experience. In the case of HDR content, the situation was similar regarding white balance. It was at a good level; however, the biggest problem turned out to be brightness management. The EOTF curve was set in such a way that in many scenes the image appeared to be overexposed, and the brightest areas lost details and turned into solid patches of light. This severely undermined realism and made the colors appear strongly over-sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in its televisions, so we opted for calibration, and its results can be seen below.

We tested the factory colors in the iFFALCON U85X model in “Film” mode, which is definitely the most reliable among all available settings, although it is still far from perfect. The main problem that stands out in both SDR and HDR content is improper white balance - an excess of blue and red components gives the image a slight purple tint, which undermines the naturalness of film scenes. However, an even greater challenge is the way the television manages its brightness. Analyzing the gamma curve for the SDR signal, we noticed significant instability: instead of sticking to the reference value of 2.4, the device oscillates around 2.2, only to suddenly experience an unnatural jump to around 3.0. In practice, this leads to confusing effects - large bright areas on the screen appear too dark, while smaller elements are unnecessarily brightened. A similar feature can be found in the EOTF curve, which makes the image unpredictable and loses its cinematic authenticity.

After calibration, the SDR mode looks simply perfect. We managed to eliminate the overly strong red saturation that previously gave the picture a somewhat excessively warm character. The colors became more balanced, which translated to a natural and pleasant reception of daily content – from television to movies and series from streaming or materials on YouTube. In HDR mode, the EOTF curve required the most work, as it originally caused excessive burning of the entire image. Calibration largely helped to "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limits are set by the television's own design, as edge lighting reveals its limitations, and even the smallest elements of light can still be oversaturated or blend into the background. However, this is a matter of technology, not calibration itself. After the correction, The Frame Pro is much more enjoyable to watch, and it's definitely worth opting for if you want to make the most of your television's capabilities.

After professional calibration of the movie mode, we must admit that the effect is more than satisfactory – the iFFALCON U85X undergoes a true transformation. Color errors in SDR content dropped to a level below 2, making them practically imperceptible to the human eye. We managed to set the white balance almost perfectly, and brightness management (gamma) became nearly exemplary. As a result, with standard quality materials, the television looks simply perfect, and it's hard to find any faults with it.

In the case of HDR signal, the situation has also improved significantly, although here the nature of the device is a bit more pronounced. Color errors have been reduced to around 3, which is an outstanding result in this price range. However, it is worth taking a look at the EOTF chart (available on the right side of the screen in the filters: 4K HDR, gamma / EOTF) to see what is not immediately visible regarding brightness management by the U85. Although the reference line looks decent, in actual film scenes, the television still interprets the signal "in its own way" due to very aggressive local dimming algorithms. Does this disqualify this model for watching HDR content? Absolutely not. It's simply a typical ailment of almost every Mini-LED that has to reconcile high brightness with an attempt to maintain deep black. One just has to be aware of these technical limitations, which are unavoidable in this segment.

While the smoothness of tonal transitions in 4K HDR content on The Frame Pro is not a problem at all, naturally with weaker signal quality – from television, HD content, or older Full HD films – imperfections may occur. Therefore, it is crucial how the television handles these limitations thanks to its image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a noticeable but not overly exaggerated way. However, it should be noted that Samsung tends to operate aggressively – even at the lowest setting of this feature, it can "eat" film grain. It is therefore advisable to use it with caution and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively upscale older materials to native 4K resolution while maintaining good sharpness and readability. Movies and series in lower quality simply look better here. However, it is worth mentioning a minor drawback – typical for many Samsung televisions. With very old sources of poor quality, you may notice cropping of the image edges on the left side of the screen. This is not a problem that will ruin the viewing experience, but it is good to know that it may occur.

When it comes to scaling the image to 4K resolution, the iFFALCON U85X performs solidly. The device efficiently enhances low-quality signals, making even older materials look clean and clear on the 4K matrix. At extremely low resolutions, such as 480p, you can notice slightly jagged edges (especially on thin lines), but let's face it – this is a scenario you'll only encounter when watching very old footage, so it's not a real issue in everyday use.

However, the digital processing aimed at smoothing tonal transitions is significantly worse. Although the menu features a function called “Gradual Smoothing”, its effectiveness is at least debatable. In practice, it does not effectively reduce banding (color stepping), and worse, it can cause more harm than good. This filter can be too aggressive where it shouldn't be, artificially smoothing out details that should not be touched, such as the natural texture of the face or fine details of the skin's texture. Instead of improving quality, this feature can give the image an unnatural, “plastic” look, so it's best to use it with great caution or, better yet: leave it turned off.

The smoothness of motion in The Frame Pro is ensured not only by the panel, which operates with a refresh rate of up to 144 Hz, but also by the image processor and the smoothing system. It is thanks to this that we can adjust the way we display movies or sports broadcasts to our own preferences. Available are sliders for motion blur reduction and judder reduction – the first function improves the sharpness of fast movements, while the second allows for softening the "jumping" image effect during camera pans. Therefore, everyone can choose between a cinematic character of motion and a smoother, more "television-like" style.

In contrast to budget constructions, which in dynamic sports scenes may resemble a slideshow, the iFFALCON U85X is a heavyweight contender equipped with a panel featuring a native refresh rate of 144Hz. However, it is worth remembering that in the world of movies, series, or sports, we will mostly operate at 120Hz due to the specifics of image enhancement systems. Such a fast panel is excellent news for gamers and sports fans, as it opens the door to advanced motion settings that simply don't exist in cheaper 60-Hz models.

We manage everything from the "Motion Clarity" menu, where instead of using pre-set, often too aggressive modes, we definitely recommend a custom configuration based on two sliders. The most important of them, reduction of flicker, is responsible for smoothness in films – here, it's best to aim for a value around 4, which will maintain a natural, cinematic character of motion without falling into the artificial "soap opera effect." On the other hand, the first slider, reduction of blur, is the key to success in sports broadcasts. In this case, it's worth going all out and setting it to maximum, ensuring that the image during fast actions on the field remains sharp, and annoying trailing is eliminated.

Samsung The Frame Pro doesn’t pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full suite of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on the fly – from refresh rates to active image processing modes. Are there any downsides? Yes, The Frame Pro doesn’t support Dolby Vision in gaming mode, but it's hard to consider this a serious issue – most gamers use HDR10 anyway... so, the HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user has no ability to enable settings designed for consoles. This is a step backward that may disappoint more informed gamers expecting full compliance with HGiG guidelines. We just hope that this mistake will be quickly corrected.

Interestingly, The Frame Pro also features an atypical arrangement of HDMI 2.1 ports. We have as many as five available – four are located in the One Connect module, and the fifth, in micro HDMI version, is directly on the TV. This solution is quite unconventional, but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimizes potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond matters. We wrote separately about input lag, but it can be revealed here that by connecting equipment directly to the TV, we achieve the absolute maximum response speed.

iFFALCON U85X is an exceptional device for gamers that has virtually everything you can expect from a modern screen for consoles or PCs. Here we find two fully-fledged HDMI 2.1 ports with full bandwidth of 48 Gbps, which opens the door to key technologies such as VRR and ALLM, ensuring smooth gameplay without tearing and with minimal latency. The TV handles high refresh rates at various resolutions without any problem, and a real curiosity is the mode that allows for up to 240Hz when dropping to Full HD quality. The entire system is managed by the Game Bar (a faithful copy from TCL), which allows for instant switching of picture modes, customization of the interface appearance, or even adding a virtual crosshair in the middle of the screen.