Samsung The Frame Pro vs Dreame S100

Samsung The Frame Pro belongs to relatively bright televisions. In synthetic tests, we managed to achieve values around 900 nits, which, for a lifestyle model, is quite a decent result. In full-screen scenes, such as the frame from the movie The Meg or the opening sequence in Life of Pi, brightness remained at levels of 700–800 nits. These are values that allow you to fully enjoy HDR effects and capture their cinematic magic. However, the situation complicates when smaller, point light sources appear on the screen. The edge lighting used here, equipped with the ability to locally dim entire strips, does not handle them very well. It sometimes happens that small elements are excessively dimmed, which weakens the effect, or on the contrary – they are significantly brightened, but at the cost of losing black depth in that part of the image. This can be compared to light glows resembling the spread of a laser beam in dense fog – the effect is visible and bright, but at the same time, it is not very natural and distracts our attention. Fortunately, the color aspect performs better. Thanks to the use of a quantum dot filter (QLED), the colors are saturated, and the reproduction of the DCI-P3 palette exceeds 92%. In general, movies or series watched in HDR on The Frame Pro present a rich color palette, even if the contrast and the operation of the backlight algorithms can sometimes distract our attention.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached about 600 nits. This is a really good result, although not the highest, considering the capabilities of the competition in this price range. In fullscreen scenes, it is evident that the television can generate an image that strikes with brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of HDR effect – and in a drastic way. In such scenes, the brightness of bright elements dropped below 100 nits, which is a truly tragic result, far from any HDR effect. This aspect can be improved, though not without any "buts." It is enough to change the local dimming setting in the television's menu, but then the blacks in such scenes simply turn gray. It’s a pity that Dreame could not refine the local dimming algorithms better, and the S100 is another example that the mere number of local dimming zones does not always translate into better image quality. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" television, although in reality it utilizes a PFS LED filter. As a result, the colors are appropriately saturated, and the color gamut coverage we measured exceeded 94% of the DCI-P3 palette.

The best results were, of course, achieved in Filmmaker mode, which immediately showed that Samsung paid attention to the factory settings. In SDR content – the type of content most often viewed – The Frame Pro performed really well. White balance and gamma were almost perfectly matched, making the image look natural and consistent. Yes, there were some noticeable errors, especially in skin tones and reds, which could be overly saturated, giving everything a slightly “warmed up” character, but in everyday use, this did not significantly affect the viewing experience. In the case of HDR content, the situation was similar regarding white balance. It was at a good level; however, the biggest problem turned out to be brightness management. The EOTF curve was set in such a way that in many scenes the image appeared to be overexposed, and the brightest areas lost details and turned into solid patches of light. This severely undermined realism and made the colors appear strongly over-sharpened. Fortunately, Samsung provides the option for manual adjustment of the curve in its televisions, so we opted for calibration, and its results can be seen below.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is available today from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all image-related settings and does not allow any configuration in the menu - not even motion smoothing. So how do the factory colors perform on the S100? Not too bad, but also not great. The TV itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This caused the image to be artificially brightened, and the colors had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how color samples leaned towards blue, generating quite significant color errors. The image in HDR mode looked definitely better, where color errors were not as prominently visible, though they still fell far from ideal. Here, the white balance was also too heavily skewed towards the blue color, which caused quite significant errors in color reproduction.

After calibration, the SDR mode looks simply perfect. We managed to eliminate the overly strong red saturation that previously gave the picture a somewhat excessively warm character. The colors became more balanced, which translated to a natural and pleasant reception of daily content – from television to movies and series from streaming or materials on YouTube. In HDR mode, the EOTF curve required the most work, as it originally caused excessive burning of the entire image. Calibration largely helped to "tame" this problem – the image stopped being overexposed, and details in bright areas became more visible. Of course, the limits are set by the television's own design, as edge lighting reveals its limitations, and even the smallest elements of light can still be oversaturated or blend into the background. However, this is a matter of technology, not calibration itself. After the correction, The Frame Pro is much more enjoyable to watch, and it's definitely worth opting for if you want to make the most of your television's capabilities.

The Dreame S100 turned out to be a device very susceptible to professional calibration. In its menu, we found a whole array of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image immediately became much more natural and pleasant to view. After fully tuning the colors, errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any color distortions have become nearly impossible to notice with the naked eye. This is a really nice surprise, as often new brands in the television market have significant problems with proper implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticize is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, we observed anomalies in the EOTF curve we measured. In the areas where high highlights should appear, there is a slight uplift of the curve above the reference line. In practice, this results in unnatural brightening of some of the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

While the smoothness of tonal transitions in 4K HDR content on The Frame Pro is not a problem at all, naturally with weaker signal quality – from television, HD content, or older Full HD films – imperfections may occur. Therefore, it is crucial how the television handles these limitations thanks to its image processor. The noise reduction feature works really effectively here. At the medium setting, it eliminates unwanted bands or artifacts, smoothing the image in a noticeable but not overly exaggerated way. However, it should be noted that Samsung tends to operate aggressively – even at the lowest setting of this feature, it can "eat" film grain. It is therefore advisable to use it with caution and adjust the settings to the material being viewed.

The upscaling itself is at a high level. The Frame Pro can effectively upscale older materials to native 4K resolution while maintaining good sharpness and readability. Movies and series in lower quality simply look better here. However, it is worth mentioning a minor drawback – typical for many Samsung televisions. With very old sources of poor quality, you may notice cropping of the image edges on the left side of the screen. This is not a problem that will ruin the viewing experience, but it is good to know that it may occur.

The scaling and digital processing in the Dreame S100 is handled by a technology that the manufacturer proudly calls Dreamind™ Pro AI. However, it is essential to clarify that this is not a proprietary processor but merely a marketing name for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about quite an outdated unit, from the time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip is responsible for that as well. The upscaling in the S100 is rather mediocre, and the processor tends to strongly and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a "Contour Smoothing" function, which theoretically is supposed to improve tonal transitions. In practice, it brings almost no improvement – setting it to any level rarely eliminates visible color banding but can unnecessarily blur elements of the image that should remain sharp.

A separate problem is the phenomenon of overscan (clipping the edges of the frame), which is almost always visible here. Although there is an option to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you already know, this mode completely blocks any other adjustments in the image menu. In our test tables, we noted that the television offers the option to disable overscan, as technically such a feature exists in the system – however, in everyday use, with reasonable image settings, you will not be able to take advantage of it.

The smoothness of motion in The Frame Pro is ensured not only by the panel, which operates with a refresh rate of up to 144 Hz, but also by the image processor and the smoothing system. It is thanks to this that we can adjust the way we display movies or sports broadcasts to our own preferences. Available are sliders for motion blur reduction and judder reduction – the first function improves the sharpness of fast movements, while the second allows for softening the "jumping" image effect during camera pans. Therefore, everyone can choose between a cinematic character of motion and a smoother, more "television-like" style.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a 144 Hz refresh rate, although in reality, the vast majority of users using it in a traditional way will still be limited to 120 Hz (because today's equipment, apart from PCs, only allows for such values). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC fluidity enhancer. In the menu, we find predefined modes that allow the TV to efficiently add artificial frames, which effectively improves the fluidity of dynamic sports shots, but also helps get rid of image stuttering in film and series materials recorded at 24 frames.

Samsung The Frame Pro doesn’t pretend to be just a “living room” television; here, gamers will also find something for themselves. The manufacturer has ensured a full suite of gaming features: we have support for variable refresh rate (VRR), automatic low latency mode (ALLM), refresh rates up to 144 Hz, and compatibility with both G-Sync and FreeSync Premium Pro. Additionally, there’s the well-known Game Bar panel, which is a quick menu where you can check key parameters on the fly – from refresh rates to active image processing modes. Are there any downsides? Yes, The Frame Pro doesn’t support Dolby Vision in gaming mode, but it's hard to consider this a serious issue – most gamers use HDR10 anyway... so, the HGIG mode. Exactly. The biggest surprise turned out to be the latest software update. Samsung… completely removed this option from The Frame PRO. In practice, this means that the TV independently interprets HDR tone mapping in games, and the user has no ability to enable settings designed for consoles. This is a step backward that may disappoint more informed gamers expecting full compliance with HGiG guidelines. We just hope that this mistake will be quickly corrected.

Interestingly, The Frame Pro also features an atypical arrangement of HDMI 2.1 ports. We have as many as five available – four are located in the One Connect module, and the fifth, in micro HDMI version, is directly on the TV. This solution is quite unconventional, but very practical. Samsung clearly suggests that this is the port to connect your console or computer. Why? Because it minimizes potential delays associated with communication through the wireless One Connect, and in gaming, every millisecond matters. We wrote separately about input lag, but it can be revealed here that by connecting equipment directly to the TV, we achieve the absolute maximum response speed.

The Dreame S100 seems almost like the perfect screen for gamers. The TV is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that features such as Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) synchronization in the range of 48-144 Hz work seamlessly on consoles. It also has a well-designed game panel (Game Bar) that allows you to continuously check the most important parameters – from active picture modes to the number of frames rendered by the console, and even the ability to add a crosshair in the center of the screen. All of this looks great on paper, but the biggest issue with the S100 is the implementation of HDR mode in games. The TV does not have a properly implemented HGiG format. As a result, an unsuspecting user may incorrectly configure the console during the initial setup of the display. A wrong configuration can lead to a picture that is too dark or too bright (as a guideline: we suggest setting the brightness in the Xbox console menu to about 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format is also problematic; it often just would not activate at all when using the XBOX – Dreame S100 line. And when it was managed to be activated, gaming was impossible due to a very high input lag that often exceeded 100ms. If the manufacturer can improve the HDR issue in games through an update, the S100 will be truly excellent equipment for gamers. For now, however, one must reckon with compromises.