Samsung The Frame LS03D vs Hisense UR8S

The Frame really handles brightness well. With results at the level of 700 nits, bright elements on the screen look impressive and detailed, whether they illuminate the entire screen or appear as small bright spots against a dark background. In more demanding scenes, like the fourth sequence from the movie Sicario 2, the blacks perform averagely, but we already discussed that in the section regarding contrast. However, when it comes to brightness – here the TV definitely performs well. An additional advantage is the quantum dot coating, i.e., QLED technology. Thanks to it, the color palette coverage has been improved, although The Frame does not stand out in this regard compared to the competition.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern the peak brightness reached around 2200 nits. That's a very good result, but as always what matters more is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes with a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has a lot of punch. It's worse with small bright elements on a dark background. The TV noticeably dims them to maintain good blacks and avoid excessive blooming. As a result, things like single stars or tiny specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost, sometimes it simply sacrifices the brightness of small details too much in favor of contrast.

Colors

With RGB Mini-LED TVs, colors should be evaluated a bit differently than usual. If we look solely at the panel's capabilities, the UR8S performs great. We measured about 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs, and this is where the potential of RGB backlighting is most apparent. The problem is that this potential isn't always used in real scenes. When we ran the same measurements on patterns with an overlaid film background, the saturation of some colors dropped noticeably. Individual zones can't always control the three RGB components as precisely when the scene becomes more complex. This is most noticeable with blue and magenta. In simple test patterns they can look very strong, but in tougher scenes samples of those colors clearly shrink. So the UR8S has enormous potential, but the TV can't always make full use of it.

Samsung offers several picture modes in its TVs, but without a doubt, the Filmmaker Mode is the one that should provide the most natural representation of content. Unfortunately, as is often the case with mass production, the differences between units can be significant, and our tested model did not escape a few problems.

In the case of SDR content, the white balance heavily leaned towards red, with a slight boost in blue. This effect was particularly visible in comparison photos – in the example of a photograph with a boy, whose face was almost unnaturally flushed. The gamma, or brightness characteristic, also did not perform perfectly – the image was slightly brightened, which took away its depth.

In 4K HDR content, the white balance was again dominated by red, this time combined with green. Meanwhile, blue clearly lost intensity, which could be easily noticed on the Color Checker palette, where the colors began to "run away" in the wrong direction. The EOTF curve, responsible for brightness in HDR content, showed that the TV tends to excessively brighten the image, especially in the darkest elements of scenes.

Overall, although it did not look tragic, it definitely needed correction. Fortunately, Samsung offers extensive calibration options, which provide an opportunity for significant image improvement. Therefore, we proceeded with professional calibration to extract the full potential of this TV.

For evaluating out-of-the-box colors we used Filmmaker mode, which is supposed to show the image as close as possible to how the material was intended. Looking at white balance alone, the UR8S does quite well. There is no strong color cast that immediately jumps out, although as brightness increases a bit too much blue and red appear while green becomes deficient. Color errors therefore show up in measurements, but the image itself does not look bad.

We have far bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9 to 2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the image loses some depth. A similar trend is visible in HDR. The EOTF curve sits above the reference value for a large portion of the range, so the UR8S again brightens the image more than it should. This is not a matter of the TV lacking brightness; it has plenty of it. The issue is how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

After professional calibration, the Filmmaker Mode shows its full potential. The white balance in HD content is exemplary – an error level of 0.5 indicates almost perfect color reproduction precision. The image now looks natural, and the colors are exactly as they should be. In 4K HDR content, the effect is not as perfect, but it still maintains a really high level. The colors are vibrant, well-saturated, and the overall image quality is impressive.

So where does the problem arise, if we praise the color reproduction so much? Unfortunately, the overall experience is disrupted by the brightness characteristic. The gamma in HD content looks decent, but in 4K HDR it's not as good. The EOTF curve shows that the TV excessively brightens certain parts of the image, which is a result of design limitations. The lack of local dimming means that the TV cannot precisely control the differences between the brightest and darkest areas of the screen. This is a barrier that simply cannot be overcome in this model.

Nevertheless, after calibration, The Frame offers excellent color reproduction, especially in HD content, and the overall appearance is much better than before the settings correction.

Hisense offers quite a few calibration options, and in SDR you can achieve a really good result with them. After calibration, the white balance is practically uniform across the entire range, and color errors drop to very low values. The UR8S can be adjusted very precisely here. HDR looks a bit different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. What's most interesting, however, is the behavior of the EOTF curve. Even after it is properly set on test patterns, the UR8S can still interpret brightness its own way during movie playback. Depending on the scene, parts of the image are slightly brightened while others are darkened compared to how they should look. This shows that the algorithms responsible for backlight control have a fairly large impact on the final image. So calibration can greatly improve colors, but we can't completely "turn off" the way the UR8S manages brightness in HDR.

It was time to check how The Frame handles older, lower-quality materials. We already know that the smoothness of tonal transitions is very high here, so we were curious to see how the TV would manage their smoothing.

The noise reduction feature in the "Standard" setting performs well – tonal transitions are noticeably smoothed out, and the image does not lose too much detail. However, it's worth noting that this effect also smooths out film grain, so its use will be a matter of individual preference.

When it comes to image scaling, the TV also performed really well. The tested frame was solid – the model was rendered correctly, with clear details. The branches in the background, although slightly jagged in places, generally look natural and do not stand out as a flaw.

A major advantage of the UR8S is its MediaTek Pentonic 800 processor, and digital image processing is one of this model’s strengths. The TV handles smoothing tonal transitions very well, especially with lower-quality sources. The feature responsible for this effect works effectively without overly interfering with the picture. Even at the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t overly sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

First of all, it is worth noting that the model we tested in 55 inches, just like the 65, 75, and 85-inch versions, is equipped with a 120 Hz panel. Unfortunately, the 43 and 50-inch variants of this series offer only 60 Hz panels, which is worth considering when making a purchase. As for improving motion fluidity, the TV offers a feature called "Picture Clarity." This is a classic motion smoother that gives users the ability to adjust it using two sliders:

Motion Blurring Reduction – this is responsible for sharpening the image during dynamic scenes. The higher the value, the less blur during rapid camera movement or moving objects. However, overly aggressive settings can make the image look unnatural and start to resemble a “soap opera”.

Judder Reduction – this slider affects the smoothness of frame playback, particularly in materials with a lower frame rate, such as films (24 fps). Higher settings can smooth out motion but can also lead to an excessive "plasticky" effect on the image.

Both sliders operate on a scale from 0 to 10, allowing for precise adjustment of the effect to one’s own preferences. It is worth experimenting with the settings to find the perfect balance between fluidity and the natural appearance of the image. We recommend setting them as shown in the picture.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so it already offers great potential for smooth motion. The panel itself performs really well, though some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

The Frame in version 2024 is equipped with four HDMI ports, but only one of them supports the 2.1 standard with a bandwidth of 40 Gb/s. This is an important piece of information if we plan to connect more than one device that requires a 4K@120 Hz signal – for example, two consoles or a console and a gaming PC. In terms of gaming features, The Frame truly has a lot to offer. We find ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), and HGiG. It is worth emphasizing that HGiG has been very well implemented here, which is particularly important since the TV does not support Dolby Vision in games (which is only available on Xbox consoles). In this case, HGiG proves to be a better standard for gaming. Samsung has not forgotten about features that enhance the gaming experience. Game Bar is an advanced panel for gamers that allows for quick adjustment of screen settings without the need to sift through the TV menu. We can even change the aspect ratio from 16:9 to cinematic 21:9, which for some gamers can be a significant advantage. However, Samsung's biggest ace up its sleeve is the Game Motion Plus feature. This is a special smoother dedicated to games, which adds extra frames of animation without significantly impacting input lag. The effect is really noticeable – the image appears much smoother, which fans of dynamic titles will particularly appreciate. In summary – Samsung The Frame is a television that offers a solid set of features for gamers. Although the limitation to one HDMI 2.1 port may be a downside, the rest of the solutions make gaming on this TV a truly enjoyable experience.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you’d expect from a modern console or PC display. It offers ALLM, VRR, and 4K at 120 Hz. It also supports Dolby Vision in game mode, so when using an Xbox Series X you don’t have to give up that HDR format. PC gamers get even more options. The panel can run at 4K/180 Hz, and dropping to Full HD can raise the refresh rate up to 330 Hz. There’s also a Game Bar that lets you quickly view key information and change gaming-related settings. The only clear shortcoming is a proper implementation of HGiG. With it enabled the TV still interferes with HDR brightness mapping, so we don’t get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.