Samsung The Frame 2026 (LS03H) vs Philips OLED811

The Frame 2026 is genuinely a bright TV. Its peak brightness reaches about 650 nits and, importantly, similar values are maintained regardless of the type of scene being displayed. So it doesn’t matter much whether we’re watching a very bright full-screen shot or just a small bright element occupying part of the screen. The backlight always has a lot of power, so bright portions of the image are strongly illuminated. That gives The Frame a solid foundation for HDR. Bright highlights can stand out, and the picture doesn’t look flat or too dark. Unfortunately, this is not a solution without compromises. Because it lacks local dimming, the TV cannot darken the blacks next to very bright elements.

This is clearly visible, among other things, in scenes 2 and 4 from our test procedure. Bright areas look intense, but at the same time the blacks around them become noticeably lifted. The picture loses depth as a result, especially when watching in the evening. For that reason The Frame performs best with HDR in bright and moderately bright scenes. There the high backlight brightness works in its favor. In darker shots the situation is the opposite.

Colors

The Frame also performs well in terms of color. It’s a QLED TV, so it can display a wide color gamut and show richly saturated colors. DCI-P3 coverage is around 94%, and BT.2020 about 72%. Those are good numbers and you can see them while watching. Colors are vivid and do not look washed out. It looks best in bright, colorful scenes. Animations or cartoons with lots of saturated hues can look really good on The Frame. In such material the TV shows one of its stronger points.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see it clearly in movies and series. All kinds of light flashes have the right intensity, especially when they appear on a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that doesn't mean you'll see that peak brightness in every shot. When the screen is filled with a large area of white or a big explosion, brightness falls to around 600 nits. That's still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs, and the OLED811 is no exception.

Colors

Aside from HDR brightness, colors also matter, and Philips performs very well here too. It covers almost the entire DCI-P3 gamut, which contains most of the colors used in HDR movies and series. So you get rich reds and lush greens, and while watching it's hard to find major faults in this area. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. Added to that is the issue of the white subpixel the WOLED panel uses to help boost brightness. With very bright colors you can see some "whitening": the color is bright but loses some of its saturation. In exactly these situations QD-OLED panels from Samsung Display have the advantage. In most movies and series, however, this won't be something that immediately stands out.

To evaluate the out-of-the-box colors we chose Filmmaker Mode. If you’re encountering it for the first time, it’s a mode designed to present a movie or series as faithfully as possible. The TV then turns off most additional picture enhancers, and the colors and luminance characteristics are meant to be as close as possible to what the content creators intended. I have to admit that the The Frame 2026 already performs quite well in this regard straight out of the box. The biggest deviation is visible in the white balance. As brightness increases, blue starts to drop off and green increases slightly. As a result the image shifts toward warmer tones. White is therefore not perfectly neutral, and in some scenes you can notice a slightly warmer overall cast.

The luminance response — gamma or EOTF — looks good. Across most of the range they stay fairly close to the target, though in the darkest parts of the image there is a larger deviation. In practice, some details emerging from black may therefore appear a bit more pronounced. That said, it’s not a flaw that jumps out during normal viewing. Overall, Filmmaker Mode is a good starting point here. However, the factory image is a bit too warm and not all hues land exactly where they should.

The movie mode on the Philips OLED811 is sensibly configured right out of the box. Most color errors are minor, both in SDR and HDR, so you can sit down and watch without first adjusting the settings. There are no major inaccuracies that would immediately pull attention away from the film.

It's not perfect, though. The white balance shows a slight deficiency of red compared with green, so whites and grays can have a faint greenish tint. It's not a strong cast, but measurements clearly show it. There are also small brightness deviations in SDR: some areas of the picture are slightly lifted, and the deepest blacks aren't always rendered evenly. In HDR the TV tracks the reference much more closely, although in places it slightly pulls details out of the shadows. These are generally things to refine. The factory movie mode provides a good starting point, and calibration will show how much more you can get out of it.

After calibration we mainly managed to remove that warmer cast and better even out the white balance. We also smoothed the brightness response a bit, which made the image more neutral and predictable. However, there are things calibration won't fix. It's mainly the behavior of the blacks, which stems from the backlight design itself and the lack of local dimming. In some scenes blacks will therefore still be slightly lifted, and you'll just have to accept that. That's more a characteristic of this model than something that can be fixed with settings. HDR is also somewhat limited. Samsung doesn't give full freedom to work across the widest color gamut, so not all colors can be reproduced perfectly. In normal viewing you probably won't notice it, but it's worth being aware of.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to even out the white balance and remove the subtle color cast visible in the factory settings. Errors in Color Checker measurements for SDR and HDR dropped to around 1 to 2, and many samples even fall below 1. That's a level at which it's hard to spot differences from the reference image with the naked eye. We also improved the gamma, and only in the brightest whites a slight brightening remains. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small elements like stars or subtitles. That gives the image a bit of extra glow that shouldn't be there, but otherwise there's little to complain about. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

As with many of Samsung’s newer TVs, this one also uses the NQ4 AI processor, only the older, second-generation version. And you have to admit it handles digital image processing quite well. Lower-resolution material is sharpened effectively, and after upscaling to 4K it still looks natural. The TV can also somewhat "tidy up" weaker sources, like older recordings or lower-quality broadcasts. That doesn't, of course, mean it will suddenly turn poor footage into 4K, but at closer viewing distances the difference compared with simpler models with weaker processors is easy to spot. Edges are clearer, and fine details don't get lost as much to signal compression.

Samsung also offers a few additional image-enhancing features, but as usual it's best to use them sparingly. At stronger settings, noise reduction can very effectively reduce posterization, but it also noticeably interferes with the image. The picture then simply starts to look very artificial, for example by heavily smoothing characters' faces. So it makes the most sense with really poor sources when various types of noise are seriously distracting.

The OLED811 handles lower-quality content reasonably well, though it's far from perfect. The "Artifact Reduction" feature helps smooth tonal transitions and on the low setting delivers a pretty good result. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artifacts. That's a sensible setting for everyday viewing. Still, there's some disappointment, because the MediaTek Pentonic 800 chip used here can, in other manufacturers' implementations, deal more effectively with heavy compression even at similarly low settings. A lot therefore depends on how each manufacturer uses its capabilities. We have a few more reservations about the 4K upscaling itself. There is plenty of detail, but the overall image looks fairly soft. Edges are heavily smoothed, which robs the picture of some sharpness and clarity. You can partly correct that with the sharpness slider in the menu, though that will just emphasize outlines rather than recover detail. On the plus side, there is no overscan, so even with an SD signal the TV does not crop the edges of the picture.

Samsung again used a panel with a maximum refresh rate of 144 Hz here. Refresh rates up to 120Hz primarily offer more headroom for material with a lot of motion. The TV can use additional motion interpolation systems that can improve smoothness in sports and other fast-moving content. However, a high refresh rate alone does not solve everything. The Frame still uses a VA panel, which has a relatively slow response time, and consequently fairly pronounced motion blur. With fast-moving objects, especially on a dark background, motion trails are easy to notice. There's also a slight doubling of edges, which can be visible even with the additional motion processing systems turned off. We already saw similar behavior in last year’s The Frame 2025, and it’s a pity Samsung hasn’t fixed that element. The 144 Hz itself provides a good foundation, but the panel’s response time still limits this TV.

In terms of motion handling, the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sports, the image stays clear and moving objects don’t leave noticeable trails. The fast response of OLED pixels helps here; you can see it clearly in the UFO test, even on dark backgrounds. There are also motion-smoothing controls. For movies you can adjust the strength of smoothing to your taste, ranging from preserving a cinematic feel to much smoother motion. A separate motion blur reduction control is useful for fast-paced content like live sports broadcasts.

In terms of gaming features, The Frame is practically on par with Samsung's top TVs. When you connect a console the TV automatically switches to game mode thanks to ALLM, so you don't have to change settings manually each time. There's also VRR, which matches the display's refresh rate to the frames being produced by the console or PC. During drops in smoothness this helps avoid the characteristic screen tearing. The Frame of course supports 4K at 120 Hz, so you can take advantage of the PlayStation 5 or Xbox Series X in games that offer higher frame rates. HGiG also works correctly. With HDR set up properly on the console the TV doesn't try to brighten the image on its own, so bright effects in games are shown as they should be. Samsung also includes a Game Bar. It's a handy menu you can bring up without leaving the game. There you can check things like VRR and the current frame rate, and quickly change the most important gaming settings. For PC use the options are even greater, since the mentioned Full HD mode allows raising the refresh rate up to 240 Hz. There is really only one feature missing that Samsung has already spoiled us with, and that's Dolby Vision Gaming. Xbox owners will notice this the most, because that console can use Dolby Vision in games. There's one more thing worth mentioning that applies specifically to this model. Its One Connect module has only one HDMI 2.1 port, so that's the only port you can use for a console or PC if you want 4K 120 Hz. Fortunately Samsung didn't tie that port to eARC. You can therefore connect a soundbar separately (3) and still have a full HDMI 2.1 port available for the console.

OLED811 has almost everything you could expect from a gaming TV. It supports 120 Hz at Full HD, 1440p and 4K resolutions, and when connected to a PC can reach 165 Hz. It also has VRR, which helps avoid screen tearing with variable frame rates, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

HGiG also works correctly, so once you enable HDR on the console the TV doesn't apply its own brightness adjustments. There's also a Game Bar that lets you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there's a significant catch, which you'll read about below.