Samsung The Frame 2025 (LS03F) vs SONY BRAVIA 3 II (XR35M2)

The Frame LS03F is a television that can surprise with its brightness. The maximum luminance reaches around 650 nits, which already looks solid on paper. But as we know, lab tests are one thing, and real movie scenes tell a completely different story. When watching HDR content in natural conditions, The Frame 2025 maintains very good results. In most film scenes, peak brightness remained at levels of 550–650 nits. This is enough to feel the difference between standard image quality and that of HDR – bright highlights, reflections on water, and moonlight appear clear and impressive.

It’s also worth noting that the LS03F is a QLED television, which translates to solid color saturation. The coverage of the DCI-P3 color space reaches about 92%, allowing for vibrant, intense colors in HDR content. It may not be at the level of top premium models, but for a lifestyle screen, the result truly deserves recognition.

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it's far from the strongest designs on the market. That said, HDR here is not just a paper feature. Compared with regular SDR material, the brightest parts of the image can already punch through, and reflections, highlights, or stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where many bright elements appear on screen. Then the Bravia 3 II can give a hint of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of strong, striking HDR we get only a correctly rendered picture.

Colors

Bravia 3 II uses a QLED-type panel, although technically it does not use a traditional quantum-dot layer. Instead Sony applied a PFS phosphor-based solution that serves a very similar role: it allows for more saturated reds and greens and thus lets the TV display a much wider color gamut. Measurements showed about 94% coverage of the DCI-P3 gamut and about 74.4% of the very wide BT.2020. Those are good results for this class of hardware, meaning the Bravia 3 II has no problem showing adequately saturated colors in HDR content. Colors don't look washed out, and the more intense shades can look really attractive.

When it comes to image quality right out of the box, even in Filmmaker mode, which is supposed to be the closest to reference, there were issues. In both HD and 4K HDR content, we noticed noticeable deviations in white balance. The image was heavily skewed towards red and blue, giving the screen a characteristic rosy tint. This effect was most visible in bright scenes – for example, in shots with a lot of white, where neutral light should naturally dominate. In such moments, the screen clearly leaned towards pink tones, which can also be seen in the attached comparison photo. As for brightness characteristics – it wasn't as bad as one might expect given such color inaccuracies. Analysis of the gamma curve and EOTF showed a slight brightening of the image compared to the reference, but not enough to drastically affect the perception of the material.

In Professional mode the Bravia 3 II, straight out of the box, delivers a fairly good level of color reproduction. In SDR the most noticeable issue is a slightly low gamma, which makes the midtone areas a bit brighter. White balance is not perfect either; as brightness increases there is a slight lack of blue and red, so whites can sometimes take on a slightly warmer, mildly greenish tint. However, these are not errors that immediately stand out while watching a movie. Average error values hover around 3, so the factory preset can be considered quite good. The situation is similar in HDR. Here again there is a slight deficiency in the blue component, so the image is a touch warmer than the reference, but the difference is not large enough to be significantly distracting during normal viewing.

After calibration, the movie mode gained a completely new quality. The issue of pink tint, which had previously been clearly visible, especially in bright scenes, was effectively eliminated. Colors began to look much more natural, and the white balance no longer dominated the rest of the image. It was no longer the same exaggerated “box picture” – everything gained coherence and a cinematic character. Additionally, the tendency of the television to slightly brighten scenes, previously visible in the EOTF curve analysis, was partially corrected. Of course, this was within the limits of what the design allows without local dimming – it’s hard to speak of perfect brightness management here. Nevertheless, the final effect was definitely closer to what one would expect from a mode called Filmmaker.

After calibration you can get a lot out of SDR content. The white balance was set almost perfectly, gamma practically matches the reference value, and average color errors fell from around 3 to about 1. That's a level at which differences from the reference image are, in practice, very hard to detect. The Bravia 3 II therefore shows that despite its position in Sony's lineup it has quite a lot of potential for precise picture tuning. Improvements are also visible in HDR, although here you can no longer work around all of the TV's limitations. After equalizing the colors it's easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II slightly darkens part of the image. That's not ideal from a reference standpoint, but in this particular TV it also has an advantage. With no local dimming and average black levels, this behavior slightly reduces the visibility of the backlight in darker scenes and helps maintain a greater sense of contrast. So you could say Sony partially masks the limits of the panel that way, rather than trying at all costs to stick to the reference luminance.

The LS03F is equipped with the NQ4 processor, which is responsible for improving image quality—especially in lower-quality materials. In practice, it works surprisingly well, particularly with older content and recordings with lower resolution. Activating the "noise reduction" feature yields noticeable effects. The television effectively smooths tonal transitions and removes digital noise that can appear in darker areas of the image. Compared to previous generations, there is a clear improvement—previously, this feature often smoothed everything too much, including details that it shouldn't have removed. In this year's model, the smoothing still occurs, but it is done in a much more acceptable manner. Textures of materials, skin, or fabric details are no longer so heavily muted as before—the image retains more naturalness. However, this does not change the fact that film grain is still removed by the television, which may not be to everyone's liking. On the other hand, it is no longer as aggressive an intervention as in previous models. It is also worth mentioning that the LS03F may struggle with very weak signals—such as recordings from VHS tapes or video in low resolution. In such cases, we noticed slight clipping of the image at the edges—so-called overscan. This can lead to situations where a small part of the image (e.g., subtitles at the bottom edge) gets cut off.

The Bravia 3 II is Sony’s first TV to use the new MediaTek Pentonic 800 chipset, and you can see a few changes in image processing. Starting with the basics: upscaling is solid. The TV can sensibly upscale lower-resolution material and doesn’t have a strong tendency to overemphasize jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming the picture remains quite pleasing. We have more reservations about the digital image processing. In this model Sony replaced the well-known "Smooth Gradation" feature with a new setting called "Digital Noise Reduction." Its role is essentially the same: to smooth unpleasant tonal transitions and artifacts caused by heavy compression. Unfortunately, this feature performs noticeably worse than before. At the "Large" setting — the only one that noticeably affected the picture — the TV can smooth away too many image elements at once, causing film grain to disappear and surface textures or even character skin to start looking unnatural. Worse, the effect is not very consistent. When a scene contains more motion the function’s effect weakens significantly and at times it looks as if the TV stops intervening in the image altogether. For everyday viewing we therefore don’t recommend using it at a high level. It can help on a static shot, but the price is often too much loss of detail.

A novelty in The Frame for 2025 is the panel with a refresh rate of 144 Hz. Yes – in a television primarily associated with displaying artwork, you can now not only watch Van Gogh but also comfortably play on a console or follow dynamic sports action. This is a definite step towards greater versatility. In the case of Samsung films, as usual in models with a 120 Hz panel and above, it allows you to adjust motion smoothness according to your own preferences. You can set a more cinematic representation while maintaining frame rate or opt for full motion smoothing. The range of options is wide, allowing you to tailor the effect to your taste – whether the viewing experience is meant to resemble classic cinema or a presentation on a modern theater panel.

*this part of the test refers to the model LS03FAU in sizes 55 and 65 inches, which is equipped with a 144Hz panel; the 43 and 50-inch sizes have 60Hz panels, and therefore perform much worse in terms of motion smoothness.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Here Sony has managed to get that problem very well under control. Fast-moving objects remain sharp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It's one of the least smearing LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series: the Bravia 9 II.

As we mentioned earlier – although The Frame is likely displaying images and artwork most of the time, Samsung recognized that a Van Gogh enthusiast could just as well be an avid gamer. And it must be admitted that The Frame 2025 has almost everything it needs to become a full-fledged gaming TV.

On board, we find support for ALLM (Auto Low Latency Mode) and variable refresh rate (VRR) thanks to the implementation of one HDMI 2.1 port. The TV handles lower resolutions at higher refresh rates with ease and features an advanced Game Bar – already known from other Samsung models – which allows for a quick overview and change of the most important gaming-related settings. And for that, it earns extra points from us. The proprietary motion smoothing feature, Auto Motion Plus Game, also deserves a mention, which – and it’s worth emphasizing – works without boosting input lag. Samsung remains the only manufacturer that has managed to implement this feature in a practically unnoticeable way in terms of delays. The result? Much better fluidity in games, especially those that struggle to maintain a steady 60 frames. This solution can genuinely improve gameplay comfort in more demanding titles – especially on consoles that don’t always manage full fluidity, particularly in AAA games.

As for the downsides – the absence of Dolby Vision we already treat as a standard in Samsung TVs, so there’s not much to complain about here. The problem, however, is something completely different. In the latest version of the Tizen system, the HGiG option has disappeared. Literally – it’s gone. This is a significant hindrance when configuring the console for proper HDR content display in games. It’s hard to understand why such a decision was made, but one thing is for sure – it should be fixed as soon as possible. We are talking about a brand that has set standards in gaming on TVs for years. If HGiG returns – and we hope that it will – The Frame LS03F can confidently aspire to the title of a true gaming TV. Not only as a wall decoration but as a device that really provides enjoyment in gaming.

[UPDATE] We have updated our tests of Samsung TVs from the 2025 lineup due to the release of software version 1131, which has restored the critical gaming feature HGiG.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been handled the way we'd like. The biggest change concerns the connections. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the long-standing issues that has plagued the manufacturer's TVs. You can connect several devices at once and use each input's full capabilities, including VRR and ALLM. There's also a simple Game Bar that lets you check key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. This won't be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow disabling tone mapping on the Bravia 3 II, so the TV continuously processes HDR content even when you would prefer to leave that task to the console. You can most easily notice this during HDR setup. The checkerboard pattern does not disappear at the point corresponding to the TV's actual capabilities. That doesn't mean HDR in games will look bad. You just need to approach the setup a bit differently and, instead of relying on the pattern, manually set the peak brightness to about 450 nits. The issue can be worked around, but you should know about it before you start configuring your console.