Samsung The Frame 2025 (LS03F) vs Samsung R85H / R86H

The Frame LS03F is a television that can surprise with its brightness. The maximum luminance reaches around 650 nits, which already looks solid on paper. But as we know, lab tests are one thing, and real movie scenes tell a completely different story. When watching HDR content in natural conditions, The Frame 2025 maintains very good results. In most film scenes, peak brightness remained at levels of 550–650 nits. This is enough to feel the difference between standard image quality and that of HDR – bright highlights, reflections on water, and moonlight appear clear and impressive.

It’s also worth noting that the LS03F is a QLED television, which translates to solid color saturation. The coverage of the DCI-P3 color space reaches about 92%, allowing for vibrant, intense colors in HDR content. It may not be at the level of top premium models, but for a lifestyle screen, the result truly deserves recognition.

If it’s about brightness, the R85H performs really well. In most of our test scenes the TV reaches around 800 to 900 nits, and with larger bright elements it can break 1000 nits. These aren't, of course, levels on par with the most expensive Mini-LEDs, but they're more than enough for watching movies and TV series in HDR, and the effect can be quite noticeable. The problem shows up again in more demanding scenes where there's a small bright element on a very dark background. Here the TV can significantly reduce its brightness so it doesn't illuminate too much of the screen. In our measurements such small highlights dropped to around 200 to 250 nits, so you can see that a limited number of local dimming zones combined with the specific behavior of the algorithm has its consequences. Fortunately, it's not something that bothers you all the time. In typical mixed HDR scenes the R85H looks good and can deliver appropriate image dynamics. You just can't expect the same punch from very small points of light as you get with TVs that have many more zones or with OLEDs.

When it comes to image quality right out of the box, even in Filmmaker mode, which is supposed to be the closest to reference, there were issues. In both HD and 4K HDR content, we noticed noticeable deviations in white balance. The image was heavily skewed towards red and blue, giving the screen a characteristic rosy tint. This effect was most visible in bright scenes – for example, in shots with a lot of white, where neutral light should naturally dominate. In such moments, the screen clearly leaned towards pink tones, which can also be seen in the attached comparison photo. As for brightness characteristics – it wasn't as bad as one might expect given such color inaccuracies. Analysis of the gamma curve and EOTF showed a slight brightening of the image compared to the reference, but not enough to drastically affect the perception of the material.

In Filmmaker mode our R85H sample performed adequately in SDR, but a few things immediately showed up in the measurements. In the white balance, as brightness increased more red crept in while blue decreased. As a result, the brighter parts of the image had a slightly too warm tint. On top of that, gamma only held to the target value at the start. It then gradually fell, making most of the image a bit too bright. The combination of the two also affected colors — errors grew especially in the brighter, more saturated samples. It didn’t look bad, but for Filmmaker mode we expected a bit more accuracy. Interestingly, in HDR our unit handled things noticeably better. White balance was much more even and, for most of the range, the individual RGB components stayed close together. Only in the brightest areas did red begin to fall short, causing the white point to shift slightly. The EOTF curve looked very good, tracking the target luminance values across almost the entire range. That doesn’t mean HDR colors were perfect. The ColorChecker still shows some deviations, particularly in some of the more saturated hues, but the errors are clearly smaller than in SDR.

After calibration, the movie mode gained a completely new quality. The issue of pink tint, which had previously been clearly visible, especially in bright scenes, was effectively eliminated. Colors began to look much more natural, and the white balance no longer dominated the rest of the image. It was no longer the same exaggerated “box picture” – everything gained coherence and a cinematic character. Additionally, the tendency of the television to slightly brighten scenes, previously visible in the EOTF curve analysis, was partially corrected. Of course, this was within the limits of what the design allows without local dimming – it’s hard to speak of perfect brightness management here. Nevertheless, the final effect was definitely closer to what one would expect from a mode called Filmmaker.

After calibration the R85H shows it has impressive color reproduction capabilities. It performed best in SDR, where the white balance was brought almost perfectly into line and the gamma stays very close to the target across most of the range. That also translated into very low errors in the ColorChecker, so there's really little to fault here. HDR also shows a clear improvement, although some issues can't be corrected as well. At peak brightness the character of the backlight itself starts to show and the individual components of the white balance begin to diverge. The same goes for the most saturated colors, which don't always land exactly where they should. Despite these limitations, overall the image is significantly more accurate than on the factory settings, and the biggest difference is clearly in SDR. However, there's one thing calibration can't fix. With highly saturated elements, color can subtly bleed onto adjacent bright parts of the image. It's easiest to notice this on white, which can pick up a slight tint from a neighboring hue. It doesn't occur in every scene, but when the content is demanding the effect can be visible. This is more a characteristic of the way the RGB backlight works than an issue with picture settings.

The LS03F is equipped with the NQ4 processor, which is responsible for improving image quality—especially in lower-quality materials. In practice, it works surprisingly well, particularly with older content and recordings with lower resolution. Activating the "noise reduction" feature yields noticeable effects. The television effectively smooths tonal transitions and removes digital noise that can appear in darker areas of the image. Compared to previous generations, there is a clear improvement—previously, this feature often smoothed everything too much, including details that it shouldn't have removed. In this year's model, the smoothing still occurs, but it is done in a much more acceptable manner. Textures of materials, skin, or fabric details are no longer so heavily muted as before—the image retains more naturalness. However, this does not change the fact that film grain is still removed by the television, which may not be to everyone's liking. On the other hand, it is no longer as aggressive an intervention as in previous models. It is also worth mentioning that the LS03F may struggle with very weak signals—such as recordings from VHS tapes or video in low resolution. In such cases, we noticed slight clipping of the image at the edges—so-called overscan. This can lead to situations where a small part of the image (e.g., subtitles at the bottom edge) gets cut off.

In the R85H, image processing is handled by the Micro RGB AI Processor. The name is new, but in terms of upscaling lower-quality content, the TV’s behavior remains very similar to what Samsung has shown before. And that’s not a bad thing, since the company has handled this aspect quite well for years. Low-resolution material is displayed cleanly, edges don’t become overly soft, and the TV doesn’t try to artificially extract details at any cost. The result is simply balanced, and with regular TV or older recordings the R85H performs as you would expect from a Samsung at this level. The only minor drawback is overscan, which can’t be completely turned off at the lowest resolutions. A separate issue is the additional processing of weaker sources. The R85H can smooth posterization and tidy up heavily compressed footage a bit, but it’s worth stressing that it does so relatively aggressively. At stronger "noise reduction" settings it starts removing not only compression artifacts but also fine details and natural film grain. It’s best to use it only when the material actually needs it.

A novelty in The Frame for 2025 is the panel with a refresh rate of 144 Hz. Yes – in a television primarily associated with displaying artwork, you can now not only watch Van Gogh but also comfortably play on a console or follow dynamic sports action. This is a definite step towards greater versatility. In the case of Samsung films, as usual in models with a 120 Hz panel and above, it allows you to adjust motion smoothness according to your own preferences. You can set a more cinematic representation while maintaining frame rate or opt for full motion smoothing. The range of options is wide, allowing you to tailor the effect to your taste – whether the viewing experience is meant to resemble classic cinema or a presentation on a modern theater panel.

*this part of the test refers to the model LS03FAU in sizes 55 and 65 inches, which is equipped with a 144Hz panel; the 43 and 50-inch sizes have 60Hz panels, and therefore perform much worse in terms of motion smoothness.

R85H has a 144 Hz panel, so motion is really smooth here. Just remember that the extra hertz above 120 will mainly be used when connected to a PC, so in this category we don't treat them as a particular advantage. For movies and TV, what's more important is that the panel is fast enough to provide access to an advanced motion-smoothing feature, "Motion Clarity", which lets us set motion from more film-like to very smooth. The panel's response time is a bit weaker. Because this is a VA panel, fast-moving objects can leave a slight trail. On bright backgrounds that's not very noticeable, but the darker the scene, the more visible the smearing becomes. That's a typical characteristic of this type of panel, and it's easiest to spot in dark scenes.

As we mentioned earlier – although The Frame is likely displaying images and artwork most of the time, Samsung recognized that a Van Gogh enthusiast could just as well be an avid gamer. And it must be admitted that The Frame 2025 has almost everything it needs to become a full-fledged gaming TV.

On board, we find support for ALLM (Auto Low Latency Mode) and variable refresh rate (VRR) thanks to the implementation of one HDMI 2.1 port. The TV handles lower resolutions at higher refresh rates with ease and features an advanced Game Bar – already known from other Samsung models – which allows for a quick overview and change of the most important gaming-related settings. And for that, it earns extra points from us. The proprietary motion smoothing feature, Auto Motion Plus Game, also deserves a mention, which – and it’s worth emphasizing – works without boosting input lag. Samsung remains the only manufacturer that has managed to implement this feature in a practically unnoticeable way in terms of delays. The result? Much better fluidity in games, especially those that struggle to maintain a steady 60 frames. This solution can genuinely improve gameplay comfort in more demanding titles – especially on consoles that don’t always manage full fluidity, particularly in AAA games.

As for the downsides – the absence of Dolby Vision we already treat as a standard in Samsung TVs, so there’s not much to complain about here. The problem, however, is something completely different. In the latest version of the Tizen system, the HGiG option has disappeared. Literally – it’s gone. This is a significant hindrance when configuring the console for proper HDR content display in games. It’s hard to understand why such a decision was made, but one thing is for sure – it should be fixed as soon as possible. We are talking about a brand that has set standards in gaming on TVs for years. If HGiG returns – and we hope that it will – The Frame LS03F can confidently aspire to the title of a true gaming TV. Not only as a wall decoration but as a device that really provides enjoyment in gaming.

[UPDATE] We have updated our tests of Samsung TVs from the 2025 lineup due to the release of software version 1131, which has restored the critical gaming feature HGiG.

Samsung has been steadily expanding its gamer-focused features for several years, and the R85H really lacks nothing important in that area. The TV supports 4K at 120 Hz, VRR and ALLM, so you can easily take advantage of the capabilities of the PlayStation 5 or Xbox Series X. HGiG also works correctly, so with the right HDR settings on the console games retain proper brightness and you don't unnecessarily lose detail in the brightest parts of the image. The only major omission is Dolby Vision Gaming, which Samsung doesn't support on any of its TVs.

Game Bar is also very useful, a handy menu you can bring up without leaving the game. You can quickly check the frame rate, VRR operation, or change the most important picture-related settings. Samsung also adds a few less obvious features, such as the ability to change the aspect ratio or Game Motion Plus, which can further smooth games running at 30 or 60 fps. Of course, this comes at the cost of higher input lag (around 55 ms), but for slower-paced titles it may be an interesting option for some players.