Samsung R85H / R86H vs Philips PQS9011 / PQS9001 (The One 2026)

If it’s about brightness, the R85H performs really well. In most of our test scenes the TV reaches around 800 to 900 nits, and with larger bright elements it can break 1000 nits. These aren't, of course, levels on par with the most expensive Mini-LEDs, but they're more than enough for watching movies and TV series in HDR, and the effect can be quite noticeable. The problem shows up again in more demanding scenes where there's a small bright element on a very dark background. Here the TV can significantly reduce its brightness so it doesn't illuminate too much of the screen. In our measurements such small highlights dropped to around 200 to 250 nits, so you can see that a limited number of local dimming zones combined with the specific behavior of the algorithm has its consequences. Fortunately, it's not something that bothers you all the time. In typical mixed HDR scenes the R85H looks good and can deliver appropriate image dynamics. You just can't expect the same punch from very small points of light as you get with TVs that have many more zones or with OLEDs.

Philips PQS9000 is a moderately bright TV; in our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference versus SDR. Sun reflections, lamps, and highlights have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it’s not at a level where bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, the TV raises the black level around a bright object when it brightens that object. That means there’s no clear separation between strong highlights and a dark background, and that contrast is what really shows off HDR. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect stays fairly basic.

Colors

Philips deserves praise for the colors. Although the manufacturer labels this model QLED, a PFS phosphor is used here instead of quantum dots. That solution does not prevent good results, however. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice, it means the vast majority of colors used in HDR movies and series will have proper saturation. Lush greens and intense reds are not a major problem and add appeal to the picture. Limitations are easier to spot in some games and rarer content that uses the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider color coverage, such as SQD or RGB LED, can show more. In its price segment the PQS9000 has nothing to be ashamed of.

In Filmmaker mode our R85H sample performed adequately in SDR, but a few things immediately showed up in the measurements. In the white balance, as brightness increased more red crept in while blue decreased. As a result, the brighter parts of the image had a slightly too warm tint. On top of that, gamma only held to the target value at the start. It then gradually fell, making most of the image a bit too bright. The combination of the two also affected colors — errors grew especially in the brighter, more saturated samples. It didn’t look bad, but for Filmmaker mode we expected a bit more accuracy. Interestingly, in HDR our unit handled things noticeably better. White balance was much more even and, for most of the range, the individual RGB components stayed close together. Only in the brightest areas did red begin to fall short, causing the white point to shift slightly. The EOTF curve looked very good, tracking the target luminance values across almost the entire range. That doesn’t mean HDR colors were perfect. The ColorChecker still shows some deviations, particularly in some of the more saturated hues, but the errors are clearly smaller than in SDR.

Unfortunately, the PQS9000’s factory picture settings for Film mode need some fine-tuning. In SDR the biggest issue is an excess of red in the white balance, which makes whites, grays, and skin tones too warm, sometimes even slightly pink. On top of that, the gamma runs below the target across most of its range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Aside from minor deviations, the components stay close to each other, so there isn’t the pronounced tint seen in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide color gamut. Many hues deviate significantly from the reference, with errors reaching 8–9. So the good gamut coverage we praised earlier doesn’t mean the TV hits specific colors accurately. It can display a wide color range, but out of the box it doesn’t use it very precisely.

After calibration the R85H shows it has impressive color reproduction capabilities. It performed best in SDR, where the white balance was brought almost perfectly into line and the gamma stays very close to the target across most of the range. That also translated into very low errors in the ColorChecker, so there's really little to fault here. HDR also shows a clear improvement, although some issues can't be corrected as well. At peak brightness the character of the backlight itself starts to show and the individual components of the white balance begin to diverge. The same goes for the most saturated colors, which don't always land exactly where they should. Despite these limitations, overall the image is significantly more accurate than on the factory settings, and the biggest difference is clearly in SDR. However, there's one thing calibration can't fix. With highly saturated elements, color can subtly bleed onto adjacent bright parts of the image. It's easiest to notice this on white, which can pick up a slight tint from a neighboring hue. It doesn't occur in every scene, but when the content is demanding the effect can be visible. This is more a characteristic of the way the RGB backlight works than an issue with picture settings.

Calibration brought a big improvement, especially in SDR material. We managed to even out the white balance and remove the previous color cast, and the Color Checker measurements now look really very good. Colors are much closer to what should be on the screen, so with regular TV or SDR movies we can be satisfied with the result. Unfortunately HDR somewhat spoils that outcome. On one hand it's limited by the panel's capabilities, since calibration won't improve contrast or replace local dimming. On the other hand there are color errors we couldn't correct because the CMS settings, that is color management, were grayed out and inactive. For that Philips loses points with us. White balance can be fine-tuned, but without access to wide color gamut controls you can't correct colors in HDR as effectively. It's a shame, because the SDR results show the potential is there, it's just not allowed to be fully used everywhere.

In the R85H, image processing is handled by the Micro RGB AI Processor. The name is new, but in terms of upscaling lower-quality content, the TV’s behavior remains very similar to what Samsung has shown before. And that’s not a bad thing, since the company has handled this aspect quite well for years. Low-resolution material is displayed cleanly, edges don’t become overly soft, and the TV doesn’t try to artificially extract details at any cost. The result is simply balanced, and with regular TV or older recordings the R85H performs as you would expect from a Samsung at this level. The only minor drawback is overscan, which can’t be completely turned off at the lowest resolutions. A separate issue is the additional processing of weaker sources. The R85H can smooth posterization and tidy up heavily compressed footage a bit, but it’s worth stressing that it does so relatively aggressively. At stronger "noise reduction" settings it starts removing not only compression artifacts but also fine details and natural film grain. It’s best to use it only when the material actually needs it.

The digital image processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality material, but it works quite unevenly. It can improve a section of the picture, only to, moments later and still within the same scene, seem to lose effectiveness and reintroduce banding between shades. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best, and that's the one we recommend. The 4K upscaling itself is acceptable, though the picture is very soft. Edges are heavily smoothed, which may make the image feel less crisp to some viewers. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges stand out more. Don't overdo the sharpness slider, however, or you may introduce artificial halos instead of improving the picture.

R85H has a 144 Hz panel, so motion is really smooth here. Just remember that the extra hertz above 120 will mainly be used when connected to a PC, so in this category we don't treat them as a particular advantage. For movies and TV, what's more important is that the panel is fast enough to provide access to an advanced motion-smoothing feature, "Motion Clarity", which lets us set motion from more film-like to very smooth. The panel's response time is a bit weaker. Because this is a VA panel, fast-moving objects can leave a slight trail. On bright backgrounds that's not very noticeable, but the darker the scene, the more visible the smearing becomes. That's a typical characteristic of this type of panel, and it's easiest to spot in dark scenes.

In terms of motion handling, the Philips PQS9000 performs outstandingly for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's especially pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and Philips pleasantly surprised us in that regard. To adjust how motion is displayed there is the "Motion Style" function. It includes two sliders: "Smoothness" and "Blur Reduction," which let you tailor the effect to the content you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try different levels of smoothing to see which you prefer.

Samsung has been steadily expanding its gamer-focused features for several years, and the R85H really lacks nothing important in that area. The TV supports 4K at 120 Hz, VRR and ALLM, so you can easily take advantage of the capabilities of the PlayStation 5 or Xbox Series X. HGiG also works correctly, so with the right HDR settings on the console games retain proper brightness and you don't unnecessarily lose detail in the brightest parts of the image. The only major omission is Dolby Vision Gaming, which Samsung doesn't support on any of its TVs.

Game Bar is also very useful, a handy menu you can bring up without leaving the game. You can quickly check the frame rate, VRR operation, or change the most important picture-related settings. Samsung also adds a few less obvious features, such as the ability to change the aspect ratio or Game Motion Plus, which can further smooth games running at 30 or 60 fps. Of course, this comes at the cost of higher input lag (around 55 ms), but for slower-paced titles it may be an interesting option for some players.

Gaming features

When it comes to gaming features, the Philips PQS9000 really has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to decide which one gets the full-capability port. Consoles can use 120 Hz in Full HD, 1440p and 4K, and a PC can also take advantage of 144 Hz at 4K or 240 Hz if you drop down to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range goes from 48–240 Hz, with the upper limit applying to Full HD mode.

ALLM is included, so the TV automatically switches into game mode, and HGiG works correctly, which is useful when setting up HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but that option is hard to enjoy because of very high latency. Apart from that caveat, the feature set is really solid.