Samsung QN90F / QN92F vs Samsung Q6F (IPS)

The Samsung QN90F can truly shine in brightness. In our measurements, it achieved over 2200 nits, which directly translates to the viewing experience. Practically, this means that when a very bright scene appears in a movie – for example, the sunrise in The Meg – the screen looks as if natural light is actually shining on us. This isn’t just a number from a chart, but a real sense of image intensity! However, the TV cannot always deliver that full power. With smaller details, such as headlights or lamps, the brightness drops to 500–700 nits. This is a conscious decision by the algorithms – this way, the contrast between large and small elements is better controlled, and the image does not lose balance. Importantly, this is still a huge improvement compared to last year's QN90D, where similar details were almost invisible, shining at just 200 nits. Here, the HDR effect is much more consistent and credible. The only downside is the colors. The coverage of the DCI-P3 palette stopped at 91%, which can be considered a rather average result in this price range.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

We tested color reproduction in the QN90F in Filmmaker mode, and as usual with Samsung TVs, this mode proves to be the best starting point right out of the box. However, this does not mean that the image is free from flaws. The white balance in SDR and HDR content was surprisingly good – the colors didn’t shift in any direction, and even in the factory setting, it looked solid. However, a problem arose with the gamma and EOTF curves, which are responsible for how the TV manages brightness. Here, the QN90F significantly brightened the entire image, causing black levels and colors to lose their intensity, and the overall effect resembled a milky filter being applied. Fortunately, Samsung, unlike many competitors in the miniLED world, provides users with a lot of tools to control the settings that we don’t find with other manufacturers, such as Chinese brands. Therefore, we decided to check if it was possible to extract the full potential of the QN90F because we know that such a high series can deliver much more.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

After our adjustment of the settings, the QN90F showed what it is really capable of – and it must be admitted that it has one of the best images we have seen on a miniLED screen this year. As we mentioned earlier, the white balance was not a major issue even in its factory version, but only after the gamma calibration were we able to get close to nearly reference values. The same is true for HDR content, where the EOTF curve after correction presents mature and consistent results. Indeed, in some films, it can be noticed that the smallest elements of the image are slightly brightened, and with a limited number of dimming zones, there is still a risk of the halo effect. It should be remembered, however, that such phenomena are characteristic of all miniLED televisions, and it's hard to expect miracles even from the QN90F. The most important thing is that after calibration, the television shows an image that, in terms of conveying the director's vision, confidently competes even with many OLED screens available on the market.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

QN90F handles upscaling very well. Materials in lower resolution, even SD, are boosted to a clear and sharp image, showcasing plenty of details in the background. This is a significant advantage because the television makes older content or everyday TV look much better than on most budget screens. However, the issue of overscan remains, which is the trimming of the edges of the screen that cannot be turned off in Samsungs. This can cause some subtitles on the screen to disappear or a relative's face from a wedding on a VHS tape to be slightly cropped. 😉

The digital image processing also works well. In the menu, we find a feature called "noise reduction," which can smooth out tonal transitions and improve the reception of lower-quality materials, such as from YouTube. In medium setting, the effect is the most beneficial – it does not heavily interfere with details while eliminating the "stair-stepping" problem in colors. However, it is important to remember that the feature can be quite aggressive and can also remove natural grain in older films, so it's best to use it in moderation.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The QN90F is equipped with a panel that has a maximum refresh rate of 165 Hz, and while primarily PC gamers will appreciate this advantage, it is still worth highlighting. In movies or sports broadcasts, we are limited to the classic 120 Hz, but this is not a cause for concern. In practice, the additional motion smoother plays a more significant role here. With the "Motion Clarity" setting, we can adjust the image to our own preferences. The blur reduction option is responsible for smoothness and trailing in sports. Meanwhile, the "judder reduction" function improves motion smoothness in productions recorded at 24 frames, such as movies and series. If we set it high, the film looks smoother and more fluid than it was actually filmed. Lower values, on the other hand, maintain its cinematic "rawness" with the visible film frame.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

QN90F has nearly everything to become the perfect television for gamers. Things like four HDMI ports, VRR, ALLM, and refresh rates reaching up to 165 Hz are probably well-known. It deserves high praise for the Game Motion Plus mode, which is a proprietary motion smoothing technology for games. Thanks to this, it can add a few “artificial” frames and make the image generated from the console look smoother than it should. This is a very unique solution in the world of televisions – competitive systems usually do not offer this – which is why Samsung has had a strong bargaining chip among gamers for years, even despite the lack of support for the still niche Dolby Vision in games.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 model year due to the release of software version 1131, which restored the crucial gaming feature HGiG.

So why are we writing about a “nearly” perfect screen? Unfortunately, similar to recent Samsung models, we noticed an issue with the lack of the HGiG feature. This solution allows the television to leave control over tone mapping to the console, so that games look exactly as the creators intended. Worse still, this feature was previously present, and it disappeared after software updates. Instead of minor tweaks, we received a step back. It’s a shame because if it weren't for this absence, the QN90F could truly be the perfect choice for gamers in the miniLED category.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.