Samsung Q7F vs Samsung R85H / R86H

Unfortunately, the Samsung Q7F is not one of the bright televisions, and this directly affects the quality of HDR movies. The peak brightness of the panel is only about 250 nits, which is definitely too low to speak of true cinematic experiences. In practice, the image in HDR content does not differ significantly from classic SDR, making it hard to talk about any "wow effect" that usually accompanies us while watching such films. During testing movie scenes, the image simply looked dim, and brightness almost invariably hovered around the mentioned 250 nits. The worst performance was observed in shots with small, intensely glowing elements – the applied global dimming technique reacted very aggressively, dimming the entire screen to maintain the black effect. On the plus side, it is worth noting the presence of a QLED coating that expands the color palette. As a budget QLED model, the Q7F performs quite decently here: its DCI-P3 color coverage is about 93%, and BT.2020 reaches 70%. This means that colors, despite the low brightness, can look quite vivid and attractive.

If it’s about brightness, the R85H performs really well. In most of our test scenes the TV reaches around 800 to 900 nits, and with larger bright elements it can break 1000 nits. These aren't, of course, levels on par with the most expensive Mini-LEDs, but they're more than enough for watching movies and TV series in HDR, and the effect can be quite noticeable. The problem shows up again in more demanding scenes where there's a small bright element on a very dark background. Here the TV can significantly reduce its brightness so it doesn't illuminate too much of the screen. In our measurements such small highlights dropped to around 200 to 250 nits, so you can see that a limited number of local dimming zones combined with the specific behavior of the algorithm has its consequences. Fortunately, it's not something that bothers you all the time. In typical mixed HDR scenes the R85H looks good and can deliver appropriate image dynamics. You just can't expect the same punch from very small points of light as you get with TVs that have many more zones or with OLEDs.

The factory color reproduction in the Samsung Q7F definitely isn't one of its strong points. In Filmmaker mode, which theoretically should be closest to neutral, the white balance issue is immediately noticeable. There's too much red on the screen, while blue is noticeably lacking. The effects of this are very easy to see – white, instead of being neutral, takes on warm, almost slightly orange tones. Over time, this makes the entire image look somewhat unnatural, and bright areas of the scene can seem unrealistic. The problems become even more apparent in HDR content. The graphs show that the TV has significant errors in the Color Checker palette, which translates to visible inaccuracies in the real image. In practice, this means that colors are not presented as they should be. The Q7F also heavily manipulates brightness; darker elements are overly boosted, causing them to lose their cinematic feel, while bright parts can appear dimmed. As a result, the image seems flattened, and instead of helping to bring out details, contrast only highlights its own limitations. This is particularly frustrating in HDR materials, as every detail matters there. In scenes where a subtle play of light and shadow should be felt, the Q7F either overdoes the brightening or, conversely, suppresses elements that were meant to draw the eye. This causes the image to lose its depth, and instead of cinematic realism, we get more of a simplification effect.

In Filmmaker mode our R85H sample performed adequately in SDR, but a few things immediately showed up in the measurements. In the white balance, as brightness increased more red crept in while blue decreased. As a result, the brighter parts of the image had a slightly too warm tint. On top of that, gamma only held to the target value at the start. It then gradually fell, making most of the image a bit too bright. The combination of the two also affected colors — errors grew especially in the brighter, more saturated samples. It didn’t look bad, but for Filmmaker mode we expected a bit more accuracy. Interestingly, in HDR our unit handled things noticeably better. White balance was much more even and, for most of the range, the individual RGB components stayed close together. Only in the brightest areas did red begin to fall short, causing the white point to shift slightly. The EOTF curve looked very good, tracking the target luminance values across almost the entire range. That doesn’t mean HDR colors were perfect. The ColorChecker still shows some deviations, particularly in some of the more saturated hues, but the errors are clearly smaller than in SDR.

After professional calibration, we managed to bring the Q7F in order – at least in terms of SDR content. The picture in this mode looks really good: the white balance has been set correctly, the colors appear natural, and errors in the color palette have dropped to values that are practically invisible to the eye. The gamma behaves excellently, and the only minor drawback is a slight brightening of smaller elements, which results from the lack of local dimming. For everyday TV watching or standard quality films, the Q7F performs surprisingly well.

It was much more difficult to tame HDR content. Despite adjusting the white balance, the television continues to manipulate brightness significantly, causing scenes to sometimes look unnatural – what was meant to be subtly darker can end up being overly brightened, and bright parts of the image sometimes appear dull. The final effect is better than in the factory settings, but it is evident that the design limitations of the Q7F do not allow for fully utilizing the potential of HDR materials.

After calibration the R85H shows it has impressive color reproduction capabilities. It performed best in SDR, where the white balance was brought almost perfectly into line and the gamma stays very close to the target across most of the range. That also translated into very low errors in the ColorChecker, so there's really little to fault here. HDR also shows a clear improvement, although some issues can't be corrected as well. At peak brightness the character of the backlight itself starts to show and the individual components of the white balance begin to diverge. The same goes for the most saturated colors, which don't always land exactly where they should. Despite these limitations, overall the image is significantly more accurate than on the factory settings, and the biggest difference is clearly in SDR. However, there's one thing calibration can't fix. With highly saturated elements, color can subtly bleed onto adjacent bright parts of the image. It's easiest to notice this on white, which can pick up a slight tint from a neighboring hue. It doesn't occur in every scene, but when the content is demanding the effect can be visible. This is more a characteristic of the way the RGB backlight works than an issue with picture settings.

Upscaling and digital image processing in the Q7F is a bit of a sine wave. On one hand, we have really nice upscaling – weaker sources look better than one might expect. The image becomes clearer, sharper, and even older movies or terrestrial TV hold up well. Samsung has been strong in this area for years, and the Q7F confirms that. On the other hand… things start to get tricky. The TV has a problem with overscan – part of the image is simply cut off, and it looks rather unrefined. Additionally, we were let down by a feature called "noise reduction," which should improve the smoothness of tonal transitions in weaker materials. In other Samsungs, it works relatively well, but here it practically makes no difference – the banding in gradients remains. It's a bit disappointing because we could have expected more from a model that is aimed at users looking for a display for SDR content.

In the R85H, image processing is handled by the Micro RGB AI Processor. The name is new, but in terms of upscaling lower-quality content, the TV’s behavior remains very similar to what Samsung has shown before. And that’s not a bad thing, since the company has handled this aspect quite well for years. Low-resolution material is displayed cleanly, edges don’t become overly soft, and the TV doesn’t try to artificially extract details at any cost. The result is simply balanced, and with regular TV or older recordings the R85H performs as you would expect from a Samsung at this level. The only minor drawback is overscan, which can’t be completely turned off at the lowest resolutions. A separate issue is the additional processing of weaker sources. The R85H can smooth posterization and tidy up heavily compressed footage a bit, but it’s worth stressing that it does so relatively aggressively. At stronger "noise reduction" settings it starts removing not only compression artifacts but also fine details and natural film grain. It’s best to use it only when the material actually needs it.

Motion blur and motion fluidity in the Q7F is probably the most budget-conscious element of this TV. The 60 Hz panel is noticeable, with blur being quite evident, especially in dynamic scenes, and it's rather difficult to consider this model as equipment designed for watching sports or playing fast-paced games. In tests with the little green man, there was a long tail, and the ball in a football match would leave trails behind it.

On the plus side, the presence of motion smoothing is commendable. It really makes a difference in movies - especially since most materials are recorded at 24 frames. Here we can decide for ourselves whether we prefer a more "cinematic" image, with the slight jerkiness characteristic of cinema, or a smoother, more "television-like" one. This actually works quite well and helps improve the viewing comfort for series or movies.

R85H has a 144 Hz panel, so motion is really smooth here. Just remember that the extra hertz above 120 will mainly be used when connected to a PC, so in this category we don't treat them as a particular advantage. For movies and TV, what's more important is that the panel is fast enough to provide access to an advanced motion-smoothing feature, "Motion Clarity", which lets us set motion from more film-like to very smooth. The panel's response time is a bit weaker. Because this is a VA panel, fast-moving objects can leave a slight trail. On bright backgrounds that's not very noticeable, but the darker the scene, the more visible the smearing becomes. That's a typical characteristic of this type of panel, and it's easiest to spot in dark scenes.

Features for gamers in the Samsung Q7F is a topic that evokes quite a mix of emotions. On one hand, no reasonable person expected miracles here, as this is a 60 Hz television, and it was clear from the start that it wouldn't be equipment for extracting the maximum from consoles or PCs. On the other hand, since the manufacturer promised specific solutions in promotional materials, it is natural that we wanted to see them in practice. At the outset, it’s quite decent. The automatic game mode (ALLM) works, so you don’t have to manually fiddle with the settings, the console itself switches the television to low-latency mode. In addition, we have Game Bar, which looks impressive and allows you to view some basic parameters without leaving the game. And this is where the good news ends.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 model year due to the release of software version 1131, which restored the key feature for gamers, HGiG.

The biggest problem with the Q7F is VRR, or rather its absence. Indeed, a relevant icon appears in the menu, and you can even see it in the Game Bar, but throughout the entire test, the feature remained inactive and could not be activated in any way. It’s even more disappointing regarding HGiG; this option was actually available at the beginning, but after the software update, it completely disappeared, which is just unprofessional. Therefore, the Q7F is suitable only for absolute basics. Sure, you can turn on the console, play calmer titles, and enjoy low input lag, but if someone is counting on more advanced features that the manufacturer promised, they will be disappointed. This is not a television that you buy with gaming in mind, and it’s better to be aware of that before making a purchase.

Samsung has been steadily expanding its gamer-focused features for several years, and the R85H really lacks nothing important in that area. The TV supports 4K at 120 Hz, VRR and ALLM, so you can easily take advantage of the capabilities of the PlayStation 5 or Xbox Series X. HGiG also works correctly, so with the right HDR settings on the console games retain proper brightness and you don't unnecessarily lose detail in the brightest parts of the image. The only major omission is Dolby Vision Gaming, which Samsung doesn't support on any of its TVs.

Game Bar is also very useful, a handy menu you can bring up without leaving the game. You can quickly check the frame rate, VRR operation, or change the most important picture-related settings. Samsung also adds a few less obvious features, such as the ability to change the aspect ratio or Game Motion Plus, which can further smooth games running at 30 or 60 fps. Of course, this comes at the cost of higher input lag (around 55 ms), but for slower-paced titles it may be an interesting option for some players.