Samsung Q7F vs Haier M90E

Unfortunately, the Samsung Q7F is not one of the bright televisions, and this directly affects the quality of HDR movies. The peak brightness of the panel is only about 250 nits, which is definitely too low to speak of true cinematic experiences. In practice, the image in HDR content does not differ significantly from classic SDR, making it hard to talk about any "wow effect" that usually accompanies us while watching such films. During testing movie scenes, the image simply looked dim, and brightness almost invariably hovered around the mentioned 250 nits. The worst performance was observed in shots with small, intensely glowing elements – the applied global dimming technique reacted very aggressively, dimming the entire screen to maintain the black effect. On the plus side, it is worth noting the presence of a QLED coating that expands the color palette. As a budget QLED model, the Q7F performs quite decently here: its DCI-P3 color coverage is about 93%, and BT.2020 reaches 70%. This means that colors, despite the low brightness, can look quite vivid and attractive.

Haier M90E is a television that does not lack brightness. In most movie scenes, peak luminance exceeds 1000 nits, which gives the image a clear "kick" and high dynamics. In typical, bright HDR materials, this looks really good. However, one must take into account the previously mentioned dimming algorithm. In scenes that are not evenly flooded with light – for instance, when displaying individual stars in a black sky – high brightness underscores the imperfections of zone control. Instead of a precise light point, we often see a distinct halo effect around bright objects. Despite these shortcomings, the overall image presentation can be pleasing, largely thanks to color reproduction. The manufacturer applied a PFS phosphor coating, allowing for wide coverage of the color palette. In our measurements, the coverage of the DCI-P3 space was a solid 95%.

The factory color reproduction in the Samsung Q7F definitely isn't one of its strong points. In Filmmaker mode, which theoretically should be closest to neutral, the white balance issue is immediately noticeable. There's too much red on the screen, while blue is noticeably lacking. The effects of this are very easy to see – white, instead of being neutral, takes on warm, almost slightly orange tones. Over time, this makes the entire image look somewhat unnatural, and bright areas of the scene can seem unrealistic. The problems become even more apparent in HDR content. The graphs show that the TV has significant errors in the Color Checker palette, which translates to visible inaccuracies in the real image. In practice, this means that colors are not presented as they should be. The Q7F also heavily manipulates brightness; darker elements are overly boosted, causing them to lose their cinematic feel, while bright parts can appear dimmed. As a result, the image seems flattened, and instead of helping to bring out details, contrast only highlights its own limitations. This is particularly frustrating in HDR materials, as every detail matters there. In scenes where a subtle play of light and shadow should be felt, the Q7F either overdoes the brightening or, conversely, suppresses elements that were meant to draw the eye. This causes the image to lose its depth, and instead of cinematic realism, we get more of a simplification effect.

For the measurements, we chose the Film mode, which should ideally offer an image closest to the creators' intentions. Unfortunately, in the case of the M90E, its characteristics – besides the reduced brightness – do not differ much from the Dynamic mode. Both in SDR and HDR content, the image is clearly tinged with a cool blue hue. The white balance is heavily skewed towards blue, reminiscent of typical aggressive "store" settings. This results in an unnatural representation of skin tones and makes the image straining on the eyes during longer viewing sessions. The way brightness is managed also negatively affects color fidelity. The television struggles to maintain proper levels – small details are often too dim, while larger, bright areas of the image tend to get blown out. These deviations in the brightness curve, combined with the cool white balance, lead to very significant color reproduction errors (DeltaE) in the factory settings.

After professional calibration, we managed to bring the Q7F in order – at least in terms of SDR content. The picture in this mode looks really good: the white balance has been set correctly, the colors appear natural, and errors in the color palette have dropped to values that are practically invisible to the eye. The gamma behaves excellently, and the only minor drawback is a slight brightening of smaller elements, which results from the lack of local dimming. For everyday TV watching or standard quality films, the Q7F performs surprisingly well.

It was much more difficult to tame HDR content. Despite adjusting the white balance, the television continues to manipulate brightness significantly, causing scenes to sometimes look unnatural – what was meant to be subtly darker can end up being overly brightened, and bright parts of the image sometimes appear dull. The final effect is better than in the factory settings, but it is evident that the design limitations of the Q7F do not allow for fully utilizing the potential of HDR materials.

Haier M90E clearly benefits from professional calibration, especially for SDR content. The TV menu offers a sufficient number of tools to effectively correct factory errors. We managed to "tame" the white balance and eliminate the dominant blue tint. We also adjusted, albeit to a lesser extent, the brightness curve (gamma), which allowed us to recover some details in the shadows that were too heavily muted from the factory. The end result for SDR is a picture that is definitely more natural and pleasant to watch. In the case of HDR mode, the success is only partial. Although it was possible to improve the white balance here as well, the color reproduction errors (Color Checker) remained at a high level. Analysis of the EOTF curve (responsible for brightness in HDR) points to the root of the problem: the TV imposes its own interpretation of the signal and does not provide tools to modify this curve. The source of the high errors is not the calibration itself, but the specifics of the device – aggressive and imprecise zone dimming interferes with measurements and is "stiffly" embedded in the characteristics of this model.

Upscaling and digital image processing in the Q7F is a bit of a sine wave. On one hand, we have really nice upscaling – weaker sources look better than one might expect. The image becomes clearer, sharper, and even older movies or terrestrial TV hold up well. Samsung has been strong in this area for years, and the Q7F confirms that. On the other hand… things start to get tricky. The TV has a problem with overscan – part of the image is simply cut off, and it looks rather unrefined. Additionally, we were let down by a feature called "noise reduction," which should improve the smoothness of tonal transitions in weaker materials. In other Samsungs, it works relatively well, but here it practically makes no difference – the banding in gradients remains. It's a bit disappointing because we could have expected more from a model that is aimed at users looking for a display for SDR content.

The evaluation of the image processor must be divided into two separate aspects, as the Haier M90E behaves inconsistently in this regard. The first issue is the upscaling itself, that is, scaling lower-resolution content to 4K. In this task, the television performs quite decently. The algorithms effectively enhance the detail, resulting in a final image that is relatively sharp, clear, and readable. In this respect, it's hard to have major complaints about the device.

The situation looks completely different with materials that have a high degree of compression, which we encounter in older recordings or on platforms like YouTube with lower bitrate. Here, the processor falters in smoothing tonal transitions and masking source imperfections. The television cannot hide compression blocks, resulting in a very harsh, "digital" character of the image. The lack of effective artifact reduction can effectively discourage viewing lower-quality content on this screen.

Motion blur and motion fluidity in the Q7F is probably the most budget-conscious element of this TV. The 60 Hz panel is noticeable, with blur being quite evident, especially in dynamic scenes, and it's rather difficult to consider this model as equipment designed for watching sports or playing fast-paced games. In tests with the little green man, there was a long tail, and the ball in a football match would leave trails behind it.

On the plus side, the presence of motion smoothing is commendable. It really makes a difference in movies - especially since most materials are recorded at 24 frames. Here we can decide for ourselves whether we prefer a more "cinematic" image, with the slight jerkiness characteristic of cinema, or a smoother, more "television-like" one. This actually works quite well and helps improve the viewing comfort for series or movies.

The Haier M90E is equipped with a simple yet functional motion smoothing system (MEMC). In the settings menu, the user will find a three-level adjustment scale: low, medium, and high. This allows for tailoring the degree of interference with the image to personal preferences – from gentle smoothing of 24p movies to maximum fluidity (soap opera effect). The system operates stably and fulfills its purpose in typical applications.

Features for gamers in the Samsung Q7F is a topic that evokes quite a mix of emotions. On one hand, no reasonable person expected miracles here, as this is a 60 Hz television, and it was clear from the start that it wouldn't be equipment for extracting the maximum from consoles or PCs. On the other hand, since the manufacturer promised specific solutions in promotional materials, it is natural that we wanted to see them in practice. At the outset, it’s quite decent. The automatic game mode (ALLM) works, so you don’t have to manually fiddle with the settings, the console itself switches the television to low-latency mode. In addition, we have Game Bar, which looks impressive and allows you to view some basic parameters without leaving the game. And this is where the good news ends.

[UPDATE] We have updated our tests of Samsung televisions from the 2025 model year due to the release of software version 1131, which restored the key feature for gamers, HGiG.

The biggest problem with the Q7F is VRR, or rather its absence. Indeed, a relevant icon appears in the menu, and you can even see it in the Game Bar, but throughout the entire test, the feature remained inactive and could not be activated in any way. It’s even more disappointing regarding HGiG; this option was actually available at the beginning, but after the software update, it completely disappeared, which is just unprofessional. Therefore, the Q7F is suitable only for absolute basics. Sure, you can turn on the console, play calmer titles, and enjoy low input lag, but if someone is counting on more advanced features that the manufacturer promised, they will be disappointed. This is not a television that you buy with gaming in mind, and it’s better to be aware of that before making a purchase.

From a hardware perspective, the Haier M90E is a solid proposition. The TV is equipped with two full-bandwidth HDMI 2.1 ports, which ensures support for key technologies: VRR (variable refresh rate) and ALLM (automatic low-latency mode). A plus is also the correct implementation of the Dolby Vision mode for gaming, which maintains a relatively low input lag. Problems arise with software configuration. The biggest drawback is the forced, continuous dynamic tone mapping by the TV's processor. This prevents proper HDR calibration from the console using system panels (HGiG) – the TV ignores source settings and processes the image its own way. We also noted shortcomings in the interface: the M90E does not have a typical "Game Bar" (overlay with parameters), which is a standard among competitors. Cooperation with Xbox consoles at unusual parameters turned out to be problematic – the device has difficulty correctly displaying 1440p resolution at 120 Hz refresh rate. Despite the aforementioned shortcomings in the software, the Haier M90E remains a very attractive screen for gamers. The final impression is saved by a solid hardware base. Native panel refresh at 144 Hz and the presence of full-fledged HDMI 2.1 ports are advantages that are crucial in daily use. If we are looking for a TV that provides high fluidity and supports 4K signals, this model will fulfill its task.