Samsung Q6F (IPS) vs Samsung The Frame Pro 2026 (LS03HW)

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

You can't deny The Frame Pro one thing: brightness. We measured a maximum of around 850 to 900 nits, so the TV already has enough power to render many HDR scenes really impressively. Bright, full-screen shots and more colorful frames look best here. In those scenes The Frame Pro can make a good impression because the image is bright, strong, and delivers the effect we expect from HDR. In our measurements some scenes reached over 800 nits, and even in trickier sections the TV maintained a fairly decent brightness level.

The problem starts when HDR relies on small bright elements shown against a dark background. Individual lamps, stars, or highlights can be bright, but very often the black level across much of the image also lifts. As a result, the bright point itself may look good, but the whole frame loses a lot of quality. That is why The Frame Pro shows HDR best in scenes that are simply full-screen. If a movie or series contains many such shots, the effect can be really enjoyable. In darker material the limitations of local dimming become much more noticeable.

Colors

The Frame Pro deserves praise for its color gamut coverage. The TV uses quantum dots, a solution known as QLED, which allows it to produce very well-saturated colors. In our measurements coverage of the important film color space DCI-P3 was about 94.5%, while the more demanding BT.2020 was around 72%.

Those are very solid results that in most scenes deliver pleasant, saturated colors. Of course, these values are not as striking as those in the latest displays using RGB backlighting, but The Frame Pro makes up for that with something else: color stability. Regardless of the scene, color saturation remains fairly consistent, and there is no situation where the TV loses a lot of color in more demanding shots.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

In SDR material The Frame Pro in Filmmaker mode performs quite well, though it falls short of perfect. White balance is relatively even, but as brightness increases the blue component starts to drop, so brighter parts of the image can have a slightly warmer tint. A bigger difference is visible in the gamma, that is how screen brightness is managed. Across most of the range it runs below our reference point, which means the TV brightens midtones a bit. As a result the image can appear slightly brighter and less contrasty than it should. The color errors themselves are not huge, but they are visible enough that calibration can still make a substantial improvement. In HDR content the white balance looks similar: across much of the range it is fairly even, with larger deviations appearing only at higher brightness. The EOTF curve is more revealing. The Frame Pro follows reference values fairly well in the brighter parts of the image, but noticeably brightens the darkest portions. This stems mainly from the TV’s backlight design. That also affects colors. With less saturated colors the errors are still moderate, but they grow significantly as saturation increases. In ColorChecker measurements a large portion of samples already register high error values. The out-of-the-box HDR can therefore be considered decent, but it is definitely not an image we would call very faithful.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

After calibration the biggest improvement is visible primarily in SDR content. White balance was evened out, but the more important change was the gamma correction, which before calibration had the greatest impact on the picture's character. After adjustments the gamma response is now very close to the reference, so the image is not as bright in the midtones and simply looks more natural. Color errors have also been noticeably reduced, so the effect of calibration in SDR is clearly visible. In HDR the situation is a bit more complex. White balance was improved and over part of the range the TV tracks the reference much better, but deviations still appear at higher brightness levels. The same applies to color reproduction, as some errors can be corrected but not all result from the settings themselves. This reveals the limitations of the TV's design and the way the backlight and local dimming affect the HDR image. That's why, for The Frame Pro, calibration makes the biggest difference for everyday content. Regular broadcast TV, YouTube, and SDR movies and series (mainly those from cheaper streaming tiers) can look noticeably better after calibration.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The Frame Pro uses the NQ4 AI Gen3 processor, so in terms of image processing it behaves very similarly to Samsung's other recent TVs. Upscaling works really well; lower-resolution material is sensibly sharpened and the image remains clear without overemphasizing edges. With regular broadcast TV or lower-quality YouTube clips, this can provide a noticeable improvement, although viewers watching much older material, for example from VHS tapes, may notice a slight left-side cropping (overscan).

It's a bit different when it comes to improving more heavily compressed images through noise reduction and artifact suppression for issues like posterization. The "Noise Reduction" function can improve weaker material, but fairly quickly it starts to interfere with the image and remove fine detail or grain. So it's best used sparingly and mainly when the source truly needs it.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

The Frame Pro is equipped with a 144 Hz panel and, when connected to a PC, also supports 240 Hz at Full HD resolution. That’s, of course, a feature aimed mainly at PC gamers, but the TV also performs very well at the standard 120 Hz refresh rate we use for watching sports or playing on consoles. A big plus is its minimal motion blur. For a VA panel The Frame Pro does really well in this regard. You don’t see strong, dark trails following moving objects that are fairly common on TVs with this type of panel. As a result, fast sports and dynamic games remain clear in motion. It also includes motion smoothing with adjustable smoothness, so for movies and sports broadcasts you can tune the motion character to your preferences. Our recommended settings can be found in the photo.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.

Function-wise for gamers The Frame Pro has a lot to offer. The TV supports 4K at 120 Hz, VRR, ALLM and correctly implemented HGiG. When you connect a PC you can also use 144 Hz at 4K, and even 240 Hz if you drop to Full HD. Samsung also adds its standard set of gaming extras: a robust Game Bar that lets you quickly view and adjust key settings, and Game Motion Plus, which can improve the smoothness of games running at 30 or 60 fps. There’s also the Gaming Hub and the ability to play in the cloud without needing to connect a console. The only real omission is Dolby Vision Gaming, which Samsung doesn’t support. Otherwise The Frame Pro offers practically everything you can expect today from a well-equipped gaming TV.