Samsung M80H vs Samsung The Frame 2026 (LS03H)

The M80H is not one of the brightest TVs. Its peak brightness is around 350 nits and we saw similar results in most of our test scenes. That's not enough to produce genuinely impressive HDR — bright highlights lack punch and the overall image is a bit too dark. In practice, HDR on the M80H resembles a well-presented SDR image more than clearly more dynamic wide-range content. The picture can still look fine, but it's hard to point to strong specular highlights, clearly bright light sources, or an effect that immediately separates HDR from ordinary content.

Colors

One of the M80H's strengths is its color. The TV uses a PFS-based backlight filter, which allows it to display a significantly wider color gamut than a standard LCD screen without filters. Our measurements confirm this — the M80H covers about 96% of the DCI-P3 gamut and 72% of BT.2020. Those are very good results, which let the colors appear strongly saturated. Samsung's policy here is interesting. The M80H is not part of the QLED family, even though in terms of color it is practically on par with models carrying that label. From an image-quality standpoint, that doesn't matter much; the colors are simply good.

The Frame 2026 is genuinely a bright TV. Its peak brightness reaches about 650 nits and, importantly, similar values are maintained regardless of the type of scene being displayed. So it doesn’t matter much whether we’re watching a very bright full-screen shot or just a small bright element occupying part of the screen. The backlight always has a lot of power, so bright portions of the image are strongly illuminated. That gives The Frame a solid foundation for HDR. Bright highlights can stand out, and the picture doesn’t look flat or too dark. Unfortunately, this is not a solution without compromises. Because it lacks local dimming, the TV cannot darken the blacks next to very bright elements.

This is clearly visible, among other things, in scenes 2 and 4 from our test procedure. Bright areas look intense, but at the same time the blacks around them become noticeably lifted. The picture loses depth as a result, especially when watching in the evening. For that reason The Frame performs best with HDR in bright and moderately bright scenes. There the high backlight brightness works in its favor. In darker shots the situation is the opposite.

Colors

The Frame also performs well in terms of color. It’s a QLED TV, so it can display a wide color gamut and show richly saturated colors. DCI-P3 coverage is around 94%, and BT.2020 about 72%. Those are good numbers and you can see them while watching. Colors are vivid and do not look washed out. It looks best in bright, colorful scenes. Animations or cartoons with lots of saturated hues can look really good on The Frame. In such material the TV shows one of its stronger points.

Filmmaker mode is reasonably well set up out of the box, though it falls short of perfect. In SDR material the most noticeable issue is an excess of red in the white balance, which makes the image look a bit warmer than it should. HDR content shows a similar character. As for the brightness response, in SDR the gamma stays close to the target for most of the range. Small deviations are mainly visible in darker areas, which in places are a little too dim. In HDR the very darkest details are slightly lifted, while from around 65% brightness the image begins to be gently darkened. This is largely due to the way the TV controls its brightness. Overall, Filmmaker mode looks good straight out of the box, but the image can still be improved.

To evaluate the out-of-the-box colors we chose Filmmaker Mode. If you’re encountering it for the first time, it’s a mode designed to present a movie or series as faithfully as possible. The TV then turns off most additional picture enhancers, and the colors and luminance characteristics are meant to be as close as possible to what the content creators intended. I have to admit that the The Frame 2026 already performs quite well in this regard straight out of the box. The biggest deviation is visible in the white balance. As brightness increases, blue starts to drop off and green increases slightly. As a result the image shifts toward warmer tones. White is therefore not perfectly neutral, and in some scenes you can notice a slightly warmer overall cast.

The luminance response — gamma or EOTF — looks good. Across most of the range they stay fairly close to the target, though in the darkest parts of the image there is a larger deviation. In practice, some details emerging from black may therefore appear a bit more pronounced. That said, it’s not a flaw that jumps out during normal viewing. Overall, Filmmaker Mode is a good starting point here. However, the factory image is a bit too warm and not all hues land exactly where they should.

After calibration, the M80H performs really well, especially with basic SDR content. Regular broadcast TV, YouTube, or movies viewed without HDR can look very accurate on it. After correcting the white balance, errors are minor, though you can still sometimes see that the TV tends to oversaturate the most saturated reds. In HDR you can also improve the picture and correct its main faults, but it doesn't reach the level of pricier models. Samsung quite heavily restricts color adjustment options in HDR, so in many areas we have to accept what the TV offers out of the box. Calibration lets us improve some parameters, but we are no longer able to change the overall image character of the M80H.

After calibration we mainly managed to remove that warmer cast and better even out the white balance. We also smoothed the brightness response a bit, which made the image more neutral and predictable. However, there are things calibration won't fix. It's mainly the behavior of the blacks, which stems from the backlight design itself and the lack of local dimming. In some scenes blacks will therefore still be slightly lifted, and you'll just have to accept that. That's more a characteristic of this model than something that can be fixed with settings. HDR is also somewhat limited. Samsung doesn't give full freedom to work across the widest color gamut, so not all colors can be reproduced perfectly. In normal viewing you probably won't notice it, but it's worth being aware of.

Although the M80H is positioned fairly low in Samsung's lineup, the manufacturer equipped it with one of its stronger processors, NQ4 AI Gen2. The same chip can be found in Neo QLED TVs and the lower-tier OLED S85H. That's good news, because the processor does a very good job improving weaker source material. Upscaling performs best. Low-resolution content is displayed properly, and edges don't look overly jagged. Of course the TV won't create details that aren't in the source, but regular broadcast TV and older recordings look decent on it. One drawback is overscan, that is, edge cropping, which cannot be fully disabled. The tonal transition smoothing feature, the so-called noise reduction, also works well. The processor can effectively reduce visible signs of heavy compression, but it does so not without side effects. At higher settings it can overly smooth the image, remove some fine detail, and even eliminate film grain. Therefore we recommend using this feature primarily for content that actually has problems with heavy compression and posterization.

As with many of Samsung’s newer TVs, this one also uses the NQ4 AI processor, only the older, second-generation version. And you have to admit it handles digital image processing quite well. Lower-resolution material is sharpened effectively, and after upscaling to 4K it still looks natural. The TV can also somewhat "tidy up" weaker sources, like older recordings or lower-quality broadcasts. That doesn't, of course, mean it will suddenly turn poor footage into 4K, but at closer viewing distances the difference compared with simpler models with weaker processors is easy to spot. Edges are clearer, and fine details don't get lost as much to signal compression.

Samsung also offers a few additional image-enhancing features, but as usual it's best to use them sparingly. At stronger settings, noise reduction can very effectively reduce posterization, but it also noticeably interferes with the image. The picture then simply starts to look very artificial, for example by heavily smoothing characters' faces. So it makes the most sense with really poor sources when various types of noise are seriously distracting.

The M80H performs very well for watching sports and gaming. The TV is equipped with a panel with a refresh rate of up to 144 Hz at 4K, and when the resolution is lowered to Full HD it can handle up to 240 Hz. PC gamers will benefit most from the latter option.

The panel also handles 120 Hz content well, which matters especially for console gaming. The high refresh rate is useful for watching sports too, and motion blur is relatively low. That’s important because VA panels are not known for the best results in this respect. With the M80H, fast-moving objects do not produce a very noticeable trail.

Samsung again used a panel with a maximum refresh rate of 144 Hz here. Refresh rates up to 120Hz primarily offer more headroom for material with a lot of motion. The TV can use additional motion interpolation systems that can improve smoothness in sports and other fast-moving content. However, a high refresh rate alone does not solve everything. The Frame still uses a VA panel, which has a relatively slow response time, and consequently fairly pronounced motion blur. With fast-moving objects, especially on a dark background, motion trails are easy to notice. There's also a slight doubling of edges, which can be visible even with the additional motion processing systems turned off. We already saw similar behavior in last year’s The Frame 2025, and it’s a pity Samsung hasn’t fixed that element. The 144 Hz itself provides a good foundation, but the panel’s response time still limits this TV.

The M80H can be a very good choice for gamers on a slightly smaller budget. Feature-wise it offers essentially the same as Samsung's much more expensive TVs. All three HDMI inputs support HDMI 2.1, so even if one is taken by a soundbar connected via eARC there’s still room for a PC and consoles. There’s also VRR up to 144 Hz at 4K and up to 240 Hz in Full HD. Samsung has properly implemented HGiG as well, so after performing HDR calibration on the console, games are appropriately matched to the screen’s capabilities. That won’t make the M80H any brighter, but at least it won’t unnecessarily wash out the brightest parts of the image. There’s also a Game Bar for quick access to the most important settings and a Gaming Hub that lets you play in the cloud without a console. The M80H also includes Game Motion Plus, which creates extra frames and improves the smoothness of games running at 30 or 60 fps. Input lag then rises to about 59 ms, but it’s still roughly three times lower than with the typical motion smoothing on other manufacturers’ TVs. We don’t really recommend it for online multiplayer, but in more relaxed titles it can work very well.

In terms of gaming features, The Frame is practically on par with Samsung's top TVs. When you connect a console the TV automatically switches to game mode thanks to ALLM, so you don't have to change settings manually each time. There's also VRR, which matches the display's refresh rate to the frames being produced by the console or PC. During drops in smoothness this helps avoid the characteristic screen tearing. The Frame of course supports 4K at 120 Hz, so you can take advantage of the PlayStation 5 or Xbox Series X in games that offer higher frame rates. HGiG also works correctly. With HDR set up properly on the console the TV doesn't try to brighten the image on its own, so bright effects in games are shown as they should be. Samsung also includes a Game Bar. It's a handy menu you can bring up without leaving the game. There you can check things like VRR and the current frame rate, and quickly change the most important gaming settings. For PC use the options are even greater, since the mentioned Full HD mode allows raising the refresh rate up to 240 Hz. There is really only one feature missing that Samsung has already spoiled us with, and that's Dolby Vision Gaming. Xbox owners will notice this the most, because that console can use Dolby Vision in games. There's one more thing worth mentioning that applies specifically to this model. Its One Connect module has only one HDMI 2.1 port, so that's the only port you can use for a console or PC if you want 4K 120 Hz. Fortunately Samsung didn't tie that port to eARC. You can therefore connect a soundbar separately (3) and still have a full HDMI 2.1 port available for the console.