Samsung DU7192 (VA) vs Sony BRAVIA 7 II

The peak brightness of the television is about 280 nits on the luminance charts. Unfortunately, this value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness significantly limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently exposed. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely insufficient when it comes to HDR. Additionally, the coverage of the DCI-P3 color palette at 82% does not favor the presentation of HDR content in its full glory. The limited color gamut makes it difficult for the television to reproduce vibrant and diverse colors, which is crucial for achieving a cinematic experience.

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright TV. In the proper "Professional" viewing mode we measured about 2000 nits of peak brightness, so the panel's capabilities are really substantial. Of course, with Mini-LEDs the result on a test pattern is only part of the story, because a lot depends on how the TV controls the backlight in real scenes. And here Sony's algorithms perform really well. Depending on the scene, the brightness we measured in movies ranged from around 1100 up to 1700 nits. That's already a level at which HDR has the proper punch and bright effects can really impress. It's not perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly prioritizes maintaining good black levels, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV doesn't always operate without compromises.

Colors

The second thing that has a huge impact on the HDR effect is, of course, color. And this is where True RGB technology was supposed to bring one of the biggest changes. Looking at the panel's raw capabilities, the Bravia 7 II performs very well. We measured about 98% DCI‑P3 coverage and 88% BT.2020, so the potential to display highly saturated colors is really large. However, in RGB TVs the situation is a bit more complex. When we performed the same measurements with a movie background applied, the gamut coverage dropped to about 92% DCI‑P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colors. In most scenes the Bravia 7 II handles this well and colors retain high saturation. The biggest differences are seen in shades of blue, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primary colors. So True RGB does offer real additional possibilities here, but like with brightness, much depends on what is actually happening on the screen.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although this mode is the closest to the intentions of filmmakers, it is not without certain imperfections. The white balance chart shows a clear dominance of red in both SDR and HDR, resulting in significant yellowness, particularly noticeable in whites and on the actors' faces. In HDR mode, there is additionally a slight dominance of green, which, however, does not have as much impact on the overall perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest areas of the image, it was too low, leading to excessive brightness in those scenes, depriving the film of drama and contrast. In HDR, the white balance remains at a similar level, but the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to strong brightness in the darkest scenes. Then the result drops sharply below the reference line, resulting in an image that is too dark and a loss of dynamics in the brighter areas.

To summarize, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest areas of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

To evaluate the out-of-the-box colors we chose Professional mode, because it performs best among the available settings. It's not perfect, though. In SDR the white balance leans slightly toward magenta, so some scenes look a bit warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. That makes the image a bit too dark in places, especially in the midtones. In HDR the situation is better. As brightness increases there is a bit too much red, but it's not a fault that stands out during viewing. Overall, Professional mode is a good starting point, although you can get a little more out of it with calibration.

Even with its lower models, Samsung offers extensive tools for image calibration, allowing for significant improvement of factory settings. We undertook this task, and the results proved to be more than satisfactory. The white balance, which previously exhibited strong yellowing in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to appropriately model the gamma in SDR materials, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main cause lies in the limited brightness of the television, which does not allow for a full representation of HDR content dynamics. Nevertheless, after calibration, the picture is clearly better and more aligned with the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

After calibration the Bravia 7 II can look significantly better. First of all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users, those changes will have the biggest impact on the picture. There is, however, a limitation when it comes to colors. On the Bravia 7 II Sony does not provide access to a classic CMS that would let us adjust individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV reproduces a specific color inaccurately, we are not always able to do anything about it. In our measurements this is most evident with some reds and blues, where errors can still be quite large. That does not, however, diminish the value of calibration. Correctly setting the white point and gamma strongly affects the overall image, so even without the ability to precisely tweak every color the difference compared with the factory settings is noticeable.

The tonal smooth transition function operates in two modes – "off" and "auto." Turning it off causes gradation issues, while the "auto" mode provides smooth transitions but at the expense of grain and details that are often blurred. Due to these limitations, we do not recommend using this function, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation means that the television is better suited for higher resolution content.

Upscaling and digital processing are among the Bravia 7 II's strongest assets and one of Sony's biggest advantages over the competition. Sony has handled digital image processing well for years, and it shows here too. Above all, the "Smooth Gradation" function works very well; it can smooth weak tonal transitions in lower-quality content. It's safest to set it to Low, but we'd comfortably recommend Medium as well. The effect is stronger then, and the TV still handles details very delicately. Some fine detail may be slightly smoothed, but Sony does it much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution sources are well upscaled to 4K; the picture looks clean and retains a lot of detail. Of course the TV won't magically turn native HD material into true 4K, but the Bravia 7 II does a very good job with what can be extracted from such a source.

Although the Samsung DU7192 is the lowest model in the manufacturer's offer, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence distinguishes the television from competitors in this price range. The television supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we find, among others, the "Motion Blur Reduction" function. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image exhibits characteristic stuttering known from material recorded at 24 frames per second, which makes this function practically fail to fulfill its role.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion smoothness it delivers everything you’d expect from a TV in this class. With sports or games at 120 fps the picture is appropriately smooth, and for movies Sony provides an advanced motion smoothing feature. You can adjust the level of interpolation separately and decide whether you want to keep a more cinematic motion or achieve noticeably smoother motion. The issue of motion blur is a bit worse. The VA panel used isn’t among the fastest, and you can notice a slight trail behind moving objects, especially on darker backgrounds. It’s not at a level that will be highly distracting during normal viewing, but last year’s Bravia 7 performed better in this respect and had a noticeably faster panel.

The Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means a lack of support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers basic features for gamers – automatic switching to low latency mode (ALLM) and support for basic HDR for games in the HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for fully enjoying the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustments of settings for games. The presence of this feature could significantly enhance user comfort, especially among those who frequently change display modes.

The Bravia 7 II essentially has everything you'd expect from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz, and ALLM, so when you start a game the TV automatically switches to low-latency mode. There's also a properly working HGiG, which means that after setting up HDR on the console the TV won't try to further brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Dolby Vision in game mode is another plus, especially for Xbox owners. Sony also includes its own Game Menu. From it you can quickly view key signal information, check VRR, or change gaming settings without digging through the TV's entire menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest complaint is not really with the features themselves, but with the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you have only one full HDMI 2.1 port left for a console or PC. With a single console that's fine, but with a PS5, an Xbox, and an audio setup it starts to get tight. That's hard to justify from Sony. Two HDMI 2.1 ports might be acceptable in cheaper TVs, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.