Samsung DU7192 (VA) vs Philips PUS7000

The peak brightness of the television is about 280 nits on the luminance charts. Unfortunately, this value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness significantly limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently exposed. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely insufficient when it comes to HDR. Additionally, the coverage of the DCI-P3 color palette at 82% does not favor the presentation of HDR content in its full glory. The limited color gamut makes it difficult for the television to reproduce vibrant and diverse colors, which is crucial for achieving a cinematic experience.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although this mode is the closest to the intentions of filmmakers, it is not without certain imperfections. The white balance chart shows a clear dominance of red in both SDR and HDR, resulting in significant yellowness, particularly noticeable in whites and on the actors' faces. In HDR mode, there is additionally a slight dominance of green, which, however, does not have as much impact on the overall perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest areas of the image, it was too low, leading to excessive brightness in those scenes, depriving the film of drama and contrast. In HDR, the white balance remains at a similar level, but the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to strong brightness in the darkest scenes. Then the result drops sharply below the reference line, resulting in an image that is too dark and a loss of dynamics in the brighter areas.

To summarize, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest areas of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Even with its lower models, Samsung offers extensive tools for image calibration, allowing for significant improvement of factory settings. We undertook this task, and the results proved to be more than satisfactory. The white balance, which previously exhibited strong yellowing in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to appropriately model the gamma in SDR materials, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main cause lies in the limited brightness of the television, which does not allow for a full representation of HDR content dynamics. Nevertheless, after calibration, the picture is clearly better and more aligned with the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

The tonal smooth transition function operates in two modes – "off" and "auto." Turning it off causes gradation issues, while the "auto" mode provides smooth transitions but at the expense of grain and details that are often blurred. Due to these limitations, we do not recommend using this function, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation means that the television is better suited for higher resolution content.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

Although the Samsung DU7192 is the lowest model in the manufacturer's offer, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence distinguishes the television from competitors in this price range. The television supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we find, among others, the "Motion Blur Reduction" function. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image exhibits characteristic stuttering known from material recorded at 24 frames per second, which makes this function practically fail to fulfill its role.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means a lack of support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers basic features for gamers – automatic switching to low latency mode (ALLM) and support for basic HDR for games in the HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for fully enjoying the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustments of settings for games. The presence of this feature could significantly enhance user comfort, especially among those who frequently change display modes.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.