Samsung DU7192 (VA) vs Philips OLED770

The peak brightness of the television is about 280 nits on the luminance charts. Unfortunately, this value is too low to fully enjoy the effects of HDR, which require significantly higher luminance. In the tested materials, such as The Meg or Gemini Man, the lack of adequate brightness significantly limits the magic of HDR, and the details in the brighter parts of the image are not sufficiently exposed. For users primarily consuming SDR content, this level of quality may be acceptable, but it is definitely insufficient when it comes to HDR. Additionally, the coverage of the DCI-P3 color palette at 82% does not favor the presentation of HDR content in its full glory. The limited color gamut makes it difficult for the television to reproduce vibrant and diverse colors, which is crucial for achieving a cinematic experience.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

The best factory mode we relied on during testing turned out to be "Filmmaker." Although this mode is the closest to the intentions of filmmakers, it is not without certain imperfections. The white balance chart shows a clear dominance of red in both SDR and HDR, resulting in significant yellowness, particularly noticeable in whites and on the actors' faces. In HDR mode, there is additionally a slight dominance of green, which, however, does not have as much impact on the overall perception of the image. The gamma, responsible for brightness in SDR materials, performed quite well, but with one serious caveat. In the darkest areas of the image, it was too low, leading to excessive brightness in those scenes, depriving the film of drama and contrast. In HDR, the white balance remains at a similar level, but the EOTF curve chart draws attention. At the beginning, the curve clearly bulges, leading to strong brightness in the darkest scenes. Then the result drops sharply below the reference line, resulting in an image that is too dark and a loss of dynamics in the brighter areas.

To summarize, the "Filmmaker" mode, despite its advantages, requires refinement – especially regarding white balance and proper management of brightness in the darkest and brightest areas of the image. In its current form, it may be acceptable for less demanding users, but for viewers expecting precise image reproduction, it may leave much to be desired.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

Even with its lower models, Samsung offers extensive tools for image calibration, allowing for significant improvement of factory settings. We undertook this task, and the results proved to be more than satisfactory. The white balance, which previously exhibited strong yellowing in both SDR and HDR, has been significantly improved. Although minor deviations from the norm can be observed, the overall effect is much cleaner and more natural than before calibration. As a result, whites and skin tones look much better. We also managed to appropriately model the gamma in SDR materials, allowing for maximum contrast that this television can offer. The EOTF curve, responsible for HDR materials, has also been improved – the image is no longer brightened or darkened as drastically as it was before calibration. Despite these successes, HDR materials still struggle with high deltaE error values. The main cause lies in the limited brightness of the television, which does not allow for a full representation of HDR content dynamics. Nevertheless, after calibration, the picture is clearly better and more aligned with the creators' intent. For users seeking the best possible quality in this class of equipment, calibration is definitely recommended.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

The tonal smooth transition function operates in two modes – "off" and "auto." Turning it off causes gradation issues, while the "auto" mode provides smooth transitions but at the expense of grain and details that are often blurred. Due to these limitations, we do not recommend using this function, as confirmed by our tests conducted with it turned off.

Scaling lower resolution materials in this model is not impressive. Details are blurred, and the edges of objects may contain artifacts. This limitation means that the television is better suited for higher resolution content.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

Although the Samsung DU7192 is the lowest model in the manufacturer's offer, it is equipped with a motion smoothing system. While the functionality of this solution is significantly limited compared to more expensive models, its mere presence distinguishes the television from competitors in this price range. The television supports a maximum refresh rate of 60 Hz, which is sufficient for comfortable viewing of movies and series, but may be inadequate for dynamic content such as sports. In the motion smoothing menu, we find, among others, the "Motion Blur Reduction" function. Unfortunately, its performance leaves much to be desired – regardless of the setting, the image exhibits characteristic stuttering known from material recorded at 24 frames per second, which makes this function practically fail to fulfill its role.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The Samsung DU7192 is equipped with HDMI 2.0 ports, which is expected in this price range. This limitation means a lack of support for the full capabilities of the latest generation consoles, such as VRR technologies. The television only offers basic features for gamers – automatic switching to low latency mode (ALLM) and support for basic HDR for games in the HGiG standard. HGiG allows for displaying HDR content in games according to manufacturers' guidelines; however, the limited brightness of the television does not allow for fully enjoying the effects that this standard offers. Unfortunately, there is a lack of conveniences such as GameBar, which is increasingly found even in cheaper models and greatly facilitates quick adjustments of settings for games. The presence of this feature could significantly enhance user comfort, especially among those who frequently change display modes.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.