Samsung DU7192 (IPS) vs TCL C655 Pro

The maximum luminance for HDR content on the Samsung DU7192 is 245 nits, but is often exceeded by even lower results. Such values are insufficient for comfortable viewing of HDR material due to the lack of appropriate image dynamics and the colour distortions caused by the device's low brightness. While the manufacturer has equipped the device with an HDR format featuring dynamic metadata, specifically HDR10+, it is rarely used compared to Dolby Vision, which Samsung has yet to introduce in its televisions. It is also worth noting that the Samsung DU7192 only covers 82% of the wide colour gamut DCI-P3, meaning that sending signals in a wide dynamic range should be avoided, as significant colour loss will be evident.

Overall, the Samsung DU7192 delivers high-quality images that will satisfy most users. The television stands out particularly for its vivid colours and decent contrast. Thanks to UHD technology, the image on the screen is sharp and clear, even during fast-moving scenes. The DU7192 also supports HDR, allowing for better reproduction of details in bright and dark areas of the image.

In the HDR effect quality category, the TCL 655 PRO television shows decent capabilities, achieving 550 nits of peak brightness. This allows for enjoyment of HDR effects, which is clearly visible in scenes such as the first from the movie Life of Pi or the last frame from The Meg. However, the limited number of dimming zones causes some problems. While in bright scenes the television performs better than its lower model, in more demanding scenes, such as the second and fourth scenes from Sicario 2, it struggles. The dimming algorithm aims for deep blacks, but at the cost of brightness – which in these moments leads to a decrease in brightness by as much as half. In these more challenging scenes with small elements, it is hard to find any praise, and the HDR effect resembles rather SDR. Nonetheless, the coverage of the color palette deserves commendation, which, like in the version without the PRO suffix, is at a very good level.

The best factory mode we used throughout the testing process was "Filmmaker." However, like most modes, it had its drawbacks. Starting with the most basic chart, the white balance, we observed a pronounced dominance of red in SDR and HDR modes. Although green also appeared in HDR mode, it did not significantly affect the overall perception. This resulted in an image with a noticeable yellow tint, particularly evident on the whites and the faces of the actors.

Another important chart, arguably more significant, is gamma, which controls contrast in materials with a standard colour palette. In factory mode it performed reasonably well, but with one notable issue regarding the darkest scenes. Here, it was significantly lowered, resulting in excessive brightening, which robbed the film of its contrast and suspense.

As for HDR content, the white balance remained similar. The main change occurred in the EOTF curve chart. Initially, we saw a bulge that, like the gamma curve, brightened the darkest scenes considerably. However, the curve then drastically changed, and the measured result dropped below the reference line, diminishing the dynamism of the film even further.

Each of our TV tests is conducted in movie mode, which usually offers the best color reproduction. Nevertheless, even this mode is not free from problems, as we noted with the TCL 655 PRO model.

In the case of HD content, the white balance clearly shifts towards red, and this effect becomes particularly noticeable in a scene from Star Wars, where the white elements of the scenery take on a pink hue. For 4K HDR material, the situation looks better, but there is a tendency to excessively enhance the blue color. As a result, the image can appear artificially sharp, which proves to be uncomfortable for the eye over a longer period. The brightness characteristic also leaves much to be desired. The Gamma chart indicates serious difficulties with excessive brightening, causing the overall presentation to look washed out. Additionally, the EOTF curve reveals significant issues with the reproduction of very small elements - they are excessively dimmed, as we detailed in the paragraph regarding HDR effects.

Samsung even with its entry-level televisions, provides advanced tools for calibration, and we put these to work. The results of our efforts were more than satisfying. The white balance, which previously had a strong yellowish tint in both scenarios, now looks much improved, although slight deviations from the ideal are still noticeable. Nevertheless, the image is significantly cleaner than before the calibration process. We were able to model the gamma well for SDR materials, achieving as much contrast as the television can provide. The EOTF curve has also been adjusted, preventing the image from becoming excessively lightened or darkened. However, it is worth noting that for HDR materials, the deltaE errors remain quite high, with the primary issue being the unit's insufficient brightness.

After calibrating the TCL 655 PRO television, a noticeable improvement in white balance can be observed, having completely eliminated the tendency for the screen to have an excessive pink hue, which was previously visible in factory mode. The image has taken on more natural tones, especially in white and bright elements, positively affecting the overall perception of the picture. As for brightness characteristics, the Gamma chart has also improved – the screen is no longer excessively bright, which previously made the image look washed out. Nevertheless, there are still some issues with the EOTF curve that are difficult to eliminate due to the design of the television and its limited number of dimming zones. These limitations prevent achieving ideal results in this regard. However, despite this minor flaw, the overall effect after calibration is truly outstanding, providing high image quality and very good color reproduction.

Let’s revisit the smoothing of tonal transitions function. It can be set to either "off" or "auto." As expected, setting it to "off" results in significant gradation issues. On the other hand, when set to "auto," both movies and TV shows offer smoother colour transitions. However, this function has notable drawbacks: it interferes with the director’s intent by softening the effect of film grain and, more concerning, it often blurs small details, misinterpreting them in the process. For this reason, we consider this feature ineffective and do not recommend using it, as the tests for tonal transition smoothness were conducted with this function turned off.

Next, we assessed the image scaling, which is crucial for watching lower-resolution materials. Unfortunately, as this is one of the manufacturer’s lower-end models, the scaling function does not perform well. The result is heavily blurred details, and a noticeable white halo forms around characters, detracting from the viewing experience.

The TCL 655 PRO television handles tonal transitions in lower-quality materials quite well. The "Gradual Smoothing" feature at a low setting effectively smooths out tonal transitions; however, this comes at the cost of losing some important details, such as the texture of objects. A positive aspect is that it does not negatively affect film grain, which helps maintain the natural look of the image.

In the context of digital processing, the television adds artificial sharpness. This may appeal to users who prefer a more vivid image. However, those who favor a softer, subtler look may find this to be a drawback. Additionally, a downside is the image cropping due to overscan, which limits the field of view and trims the edges of the frame. This can be problematic in certain scenes - e.g., news tickers.

Although the Samsung DU7192 is the entry-level model in the manufacturer’s range, it does come equipped with motion smoothing technology. While this feature is somewhat limited in comparison to higher-end models, its inclusion is a notable advantage in its price category. The maximum refresh rate available on the TV is 60 Hz, which is adequate for movies and TV shows but falls short for fast-moving content like sports.

Within the motion smoothing settings, there are two features aimed at improving fluidity: "Motion Blur Reduction" and "Clear Motion (LED)." We’ll discuss the latter later, but first, let’s focus on the former. Unfortunately, despite being present, we found no noticeable difference when adjusting this setting. Regardless of the chosen option, the picture maintained the same stuttering effect typically associated with 24 fps content.

The Samsung DU7192 uses a panel with an average response time. However, it is worth noting that this type of panel outperforms VA panels in a similar price range, making it a more suitable option for watching sports compared to other budget models.

The TCL C655 PRO TV is equipped with a 4K panel with a refresh rate of 60 Hz, making it ideal for watching movies. Additionally, the "Flicker Reduction" feature allows users to adjust the fluidity of the image, giving them the choice between smoother motion or a cinematic, choppy effect. Moreover, the TV handles lower resolution content well, such as Full HD and 2K, offering a refresh rate of 120 Hz, which will certainly appeal to gamers who can enjoy smoother images, albeit at the cost of lower resolution.

The Samsung DU7192 is equipped only with HDMI 2.0 ports, which is to be expected given the device's price point and its target consumer market. As a result, it does not support the highest resolutions or frame rates available on the latest generation consoles. It does, however, feature the basic gaming functionality of ALLM (Auto Low Latency Mode). Unfortunately, it is disappointing that the manufacturer did not include GameBar, a feature that has become a standard even in lower-end TVs. GameBar would have provided significant convenience by allowing gamers to easily adjust settings quickly during gameplay.

The TCL C655 PRO television offers an almost perfect set of features for gamers, supporting all key technologies that significantly improve the gaming experience. The ALLM feature automatically switches the television to low latency mode, resulting in better responsiveness and minimized signal delays – particularly important in dynamic titles. VRR synchronizes the screen refresh rate with the number of frames generated by the console, eliminating screen tearing and thus guaranteeing smoother gameplay.

Support for Dolby Vision in game mode allows for more detailed color and contrast reproduction in games that support this format, while the Game Bar provides quick access to important settings such as response time or latency level. Unfortunately, this model does not support 4K resolution at 120 Hz, which may disappoint the most demanding gamers. However, for those who can forgo 4K, support for Full HD and 2K at 120 Hz offers exceptionally smooth visuals, making it an attractive alternative for enthusiasts of higher refresh rates.