Samsung DU7192 (IPS) vs SAMSUNG OLED S90F (WOLED)

The maximum luminance for HDR content on the Samsung DU7192 is 245 nits, but is often exceeded by even lower results. Such values are insufficient for comfortable viewing of HDR material due to the lack of appropriate image dynamics and the colour distortions caused by the device's low brightness. While the manufacturer has equipped the device with an HDR format featuring dynamic metadata, specifically HDR10+, it is rarely used compared to Dolby Vision, which Samsung has yet to introduce in its televisions. It is also worth noting that the Samsung DU7192 only covers 82% of the wide colour gamut DCI-P3, meaning that sending signals in a wide dynamic range should be avoided, as significant colour loss will be evident.

Overall, the Samsung DU7192 delivers high-quality images that will satisfy most users. The television stands out particularly for its vivid colours and decent contrast. Thanks to UHD technology, the image on the screen is sharp and clear, even during fast-moving scenes. The DU7192 also supports HDR, allowing for better reproduction of details in bright and dark areas of the image.

Does the S90F handle not only dark scenes but also bright parts of the image? Definitely yes. Stories about OLEDs as "dark screens" can slowly be regarded as a myth. The Samsung S90F, similar to the LG C5 based on a very similar panel, achieves brightness exceeding 1000 nits. This is a value entirely sufficient to enjoy impressive and dynamic HDR images – both in movies and series. Most of the scenes we tested look stunning, with well-defined lights and high contrast. Of course, OLED technology still has its limitations – with very bright, full-screen sequences, such as the test card from the movie The Meg (5th image), the TV can noticeably dim the image. However, it's worth noting that such scenes are quite rare. One can say that the HDR effect is good enough that even mid-range OLED models, like the S90F, can provide a cinematic experience in the home living room.

The best factory mode we used throughout the testing process was "Filmmaker." However, like most modes, it had its drawbacks. Starting with the most basic chart, the white balance, we observed a pronounced dominance of red in SDR and HDR modes. Although green also appeared in HDR mode, it did not significantly affect the overall perception. This resulted in an image with a noticeable yellow tint, particularly evident on the whites and the faces of the actors.

Another important chart, arguably more significant, is gamma, which controls contrast in materials with a standard colour palette. In factory mode it performed reasonably well, but with one notable issue regarding the darkest scenes. Here, it was significantly lowered, resulting in excessive brightening, which robbed the film of its contrast and suspense.

As for HDR content, the white balance remained similar. The main change occurred in the EOTF curve chart. Initially, we saw a bulge that, like the gamma curve, brightened the darkest scenes considerably. However, the curve then drastically changed, and the measured result dropped below the reference line, diminishing the dynamism of the film even further.

Samsung S90F, like most modern TVs, offers many picture modes, but – in line with our testing tradition – we checked it in its best one, which is the Filmmaker mode. As a result, the image looks much more natural than in the default, often oversaturated settings. It was neither overly saturated nor artificially subdued – just closer to what you should see. Of course, "more correct" doesn’t mean "perfect." Our S90F sample unfortunately had significant issues with white balance, particularly in the blue color range, resulting in a slightly yellowish filter applied to most scenes. Someone might say that it looks more "cinematic" – because it's warmer – but let's be honest, George Lucas didn't film Star Wars in sepia 😉 (you'll find the comparison with the scene as always below).

Additionally, in HDR materials, there was a noticeable issue with brightness management. The EOTF curve showed a distinct "spike" in brightness – the TV brightened the image more than it should have, making some effects look too intense and diverging from the reference. Thankfully, some of these issues can be eliminated with professional calibration – you can read about its effects later in the review.

Samsung even with its entry-level televisions, provides advanced tools for calibration, and we put these to work. The results of our efforts were more than satisfying. The white balance, which previously had a strong yellowish tint in both scenarios, now looks much improved, although slight deviations from the ideal are still noticeable. Nevertheless, the image is significantly cleaner than before the calibration process. We were able to model the gamma well for SDR materials, achieving as much contrast as the television can provide. The EOTF curve has also been adjusted, preventing the image from becoming excessively lightened or darkened. However, it is worth noting that for HDR materials, the deltaE errors remain quite high, with the primary issue being the unit's insufficient brightness.

After calibration, we managed to eliminate almost all the aforementioned errors. Older movies in SDR quality finally look as they should – without the sepia effect or artificial aging of the image. The atmosphere of the classics is returning to its rightful place (you're welcome, Star Wars fans), and the colors no longer resemble an Instagram filter.

One of the key changes was also the improvement of brightness characteristics in HDR content. We managed to control the EOTF curve in an almost reference way. Yes, the most demanding users may notice minimal deviations in brightness, but to be honest – most viewers won't even notice that. And it’s no wonder, because the vast majority of errors are below the ΔE 3 threshold, which is below the visibility threshold. After calibration, the S90F (WOLED) becomes a truly excellent display – one that you can enjoy nearly perfect image quality on.

Let’s revisit the smoothing of tonal transitions function. It can be set to either "off" or "auto." As expected, setting it to "off" results in significant gradation issues. On the other hand, when set to "auto," both movies and TV shows offer smoother colour transitions. However, this function has notable drawbacks: it interferes with the director’s intent by softening the effect of film grain and, more concerning, it often blurs small details, misinterpreting them in the process. For this reason, we consider this feature ineffective and do not recommend using it, as the tests for tonal transition smoothness were conducted with this function turned off.

Next, we assessed the image scaling, which is crucial for watching lower-resolution materials. Unfortunately, as this is one of the manufacturer’s lower-end models, the scaling function does not perform well. The result is heavily blurred details, and a noticeable white halo forms around characters, detracting from the viewing experience.

Digital image processing in the S90F:

Fortunately, Samsung, as in most of its models, can effectively deal with the unwanted posterization effect in the S90F. The function responsible for this element is noise reduction, which quite nicely smooths out tonal transitions and eliminates unnatural color joins – of course, within its capabilities. Unfortunately, it works quite aggressively, so using it comes with compromises. In addition to improving gradation, it may also remove film grain or gently soften facial features. In this case, the choice is yours – do you prefer a more "clean" image, or do you care about preserving the original texture of the material.

Image scaling in the S90F:

In this year's model, Samsung has implemented its own AI processor – NQ4 Gen3, which really manages quite well with upscaling. In our test scenes, the television effectively "pulled up" lower-quality content towards artificial 4K – the image was more pleasant to view, and the differences in sharpness between native and scaled content were minimal. Unfortunately, behind this entire AI marketing façade lies a certain shortcoming. The S90F does not handle overscan well. If you reach for truly archival materials – like a VHS tape of your parents' wedding – you must reckon with the fact that the lower part of the image may be cut off. The image adaptation function to the resolution simply does not work here as it should.

Although the Samsung DU7192 is the entry-level model in the manufacturer’s range, it does come equipped with motion smoothing technology. While this feature is somewhat limited in comparison to higher-end models, its inclusion is a notable advantage in its price category. The maximum refresh rate available on the TV is 60 Hz, which is adequate for movies and TV shows but falls short for fast-moving content like sports.

Within the motion smoothing settings, there are two features aimed at improving fluidity: "Motion Blur Reduction" and "Clear Motion (LED)." We’ll discuss the latter later, but first, let’s focus on the former. Unfortunately, despite being present, we found no noticeable difference when adjusting this setting. Regardless of the chosen option, the picture maintained the same stuttering effect typically associated with 24 fps content.

The Samsung DU7192 uses a panel with an average response time. However, it is worth noting that this type of panel outperforms VA panels in a similar price range, making it a more suitable option for watching sports compared to other budget models.

S90F really handles motion great – after all, it's an OLED with a 144 Hz panel, so sports and games look simply amazing on it. The picture is smooth, clear, and there's no room for ghosting or blurring that sometimes plagues cheaper LCDs.

The TV is also equipped with motion smoothing settings that allow you to tailor everything to your liking. We have motion blur reduction and judder reduction – you can set it up to make the picture super smooth (even to that soap opera effect), or more cinematic, with the classic "choppiness" of 24 frames. The choice is yours; Samsung doesn't impose anything.

The Samsung DU7192 is equipped only with HDMI 2.0 ports, which is to be expected given the device's price point and its target consumer market. As a result, it does not support the highest resolutions or frame rates available on the latest generation consoles. It does, however, feature the basic gaming functionality of ALLM (Auto Low Latency Mode). Unfortunately, it is disappointing that the manufacturer did not include GameBar, a feature that has become a standard even in lower-end TVs. GameBar would have provided significant convenience by allowing gamers to easily adjust settings quickly during gameplay.

When it comes to gaming features – we have absolutely no complaints about the S90F. Aside from the lack of Dolby Vision, which is already the norm for Samsung. The TV operates at 144 Hz, has four HDMI 2.1 ports, so you can easily connect more than one console or PC. It also includes Game Bar – a practical tool that allows you to quickly preview picture settings, VRR status, ALLM mode, and other useful options. Game Motion Plus is also noteworthy – Samsung’s proprietary motion smoother, which uniquely works well in games. The image feels smoother without any artificial effects or slowdowns.

It’s also worth mentioning the HGiG feature, which – surprisingly – works correctly. We mention this because Samsung clearly broke something in one of its recent updates, and in some models, the option responsible for HGiG simply... disappears from the menu. Setting it becomes virtually impossible. Fortunately, our S90F unit did not have this issue, but the situation is dynamic, so it’s worth keeping this in mind and regularly checking for new software versions and information from the manufacturer.