Samsung DU7192 (IPS) vs PHILPS PUS9060

The maximum luminance for HDR content on the Samsung DU7192 is 245 nits, but is often exceeded by even lower results. Such values are insufficient for comfortable viewing of HDR material due to the lack of appropriate image dynamics and the colour distortions caused by the device's low brightness. While the manufacturer has equipped the device with an HDR format featuring dynamic metadata, specifically HDR10+, it is rarely used compared to Dolby Vision, which Samsung has yet to introduce in its televisions. It is also worth noting that the Samsung DU7192 only covers 82% of the wide colour gamut DCI-P3, meaning that sending signals in a wide dynamic range should be avoided, as significant colour loss will be evident.

Overall, the Samsung DU7192 delivers high-quality images that will satisfy most users. The television stands out particularly for its vivid colours and decent contrast. Thanks to UHD technology, the image on the screen is sharp and clear, even during fast-moving scenes. The DU7192 also supports HDR, allowing for better reproduction of details in bright and dark areas of the image.

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

The best factory mode we used throughout the testing process was "Filmmaker." However, like most modes, it had its drawbacks. Starting with the most basic chart, the white balance, we observed a pronounced dominance of red in SDR and HDR modes. Although green also appeared in HDR mode, it did not significantly affect the overall perception. This resulted in an image with a noticeable yellow tint, particularly evident on the whites and the faces of the actors.

Another important chart, arguably more significant, is gamma, which controls contrast in materials with a standard colour palette. In factory mode it performed reasonably well, but with one notable issue regarding the darkest scenes. Here, it was significantly lowered, resulting in excessive brightening, which robbed the film of its contrast and suspense.

As for HDR content, the white balance remained similar. The main change occurred in the EOTF curve chart. Initially, we saw a bulge that, like the gamma curve, brightened the darkest scenes considerably. However, the curve then drastically changed, and the measured result dropped below the reference line, diminishing the dynamism of the film even further.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

Samsung even with its entry-level televisions, provides advanced tools for calibration, and we put these to work. The results of our efforts were more than satisfying. The white balance, which previously had a strong yellowish tint in both scenarios, now looks much improved, although slight deviations from the ideal are still noticeable. Nevertheless, the image is significantly cleaner than before the calibration process. We were able to model the gamma well for SDR materials, achieving as much contrast as the television can provide. The EOTF curve has also been adjusted, preventing the image from becoming excessively lightened or darkened. However, it is worth noting that for HDR materials, the deltaE errors remain quite high, with the primary issue being the unit's insufficient brightness.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

Let’s revisit the smoothing of tonal transitions function. It can be set to either "off" or "auto." As expected, setting it to "off" results in significant gradation issues. On the other hand, when set to "auto," both movies and TV shows offer smoother colour transitions. However, this function has notable drawbacks: it interferes with the director’s intent by softening the effect of film grain and, more concerning, it often blurs small details, misinterpreting them in the process. For this reason, we consider this feature ineffective and do not recommend using it, as the tests for tonal transition smoothness were conducted with this function turned off.

Next, we assessed the image scaling, which is crucial for watching lower-resolution materials. Unfortunately, as this is one of the manufacturer’s lower-end models, the scaling function does not perform well. The result is heavily blurred details, and a noticeable white halo forms around characters, detracting from the viewing experience.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

Although the Samsung DU7192 is the entry-level model in the manufacturer’s range, it does come equipped with motion smoothing technology. While this feature is somewhat limited in comparison to higher-end models, its inclusion is a notable advantage in its price category. The maximum refresh rate available on the TV is 60 Hz, which is adequate for movies and TV shows but falls short for fast-moving content like sports.

Within the motion smoothing settings, there are two features aimed at improving fluidity: "Motion Blur Reduction" and "Clear Motion (LED)." We’ll discuss the latter later, but first, let’s focus on the former. Unfortunately, despite being present, we found no noticeable difference when adjusting this setting. Regardless of the chosen option, the picture maintained the same stuttering effect typically associated with 24 fps content.

The Samsung DU7192 uses a panel with an average response time. However, it is worth noting that this type of panel outperforms VA panels in a similar price range, making it a more suitable option for watching sports compared to other budget models.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

The Samsung DU7192 is equipped only with HDMI 2.0 ports, which is to be expected given the device's price point and its target consumer market. As a result, it does not support the highest resolutions or frame rates available on the latest generation consoles. It does, however, feature the basic gaming functionality of ALLM (Auto Low Latency Mode). Unfortunately, it is disappointing that the manufacturer did not include GameBar, a feature that has become a standard even in lower-end TVs. GameBar would have provided significant convenience by allowing gamers to easily adjust settings quickly during gameplay.

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.